This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - tex
26
« on: 05 April 2020, 04:18:19 pm »
You can still get the hole shot headers from USA about £500 these work well, go on dales holes hot site
27
« on: 29 March 2020, 07:14:16 pm »
Fitted the tpms to the tft dash, didn't work at first , so read the instructions and you have to switch the unit on then fit the senser. Best to read first 😨
28
« on: 28 March 2020, 01:41:47 pm »
You can renew at main post office , they have a camera there , takes 10 min ☺
29
« on: 27 March 2020, 10:32:16 am »
Dazza, just seen the post , yes ran my tdr for 2 years , sold it a year or so ago and regretted it almost straight away, it was reliable and great fun , brakes need regular maintenance as do the power valves, plenty of parts available , there is a forum also. If buying any old bikes like it, factor in a engine rebuild if no proof of , and get ready to learn about wiring! ! Like most two strokes of that era prices are going stupid, you can get a jap import for a couple of grand but risky as will need going over .
30
« on: 22 March 2020, 06:23:40 pm »
Very nice
31
« on: 11 March 2020, 08:31:30 pm »
Lol , nowt mate, hopefully he just wants to get rid of them, fingers crossed.
32
« on: 11 March 2020, 11:55:32 am »
Red, here's a pic, I've put a note through the door with my number, defo 3 bikes all x7s
33
« on: 08 March 2020, 06:10:37 pm »
Red , there's a house near my work that has three x7s in the porch , I could ask him if he wants rid of them , one complete bike one in bits .
34
« on: 07 March 2020, 02:44:55 pm »
check for any splits in the ht leads , possible
35
« on: 06 March 2020, 06:20:26 pm »
Check the drain hole is not blocked also, it's in the side of the head
36
« on: 01 March 2020, 09:21:18 pm »
There's plenty on ebay around 7 /10 quid, not sure what the quility is like though
37
« on: 15 February 2020, 08:14:15 am »
That's terrible news , rest in peace luke , a true gen 1 man.
38
« on: 03 December 2019, 01:44:49 pm »
I normally reagrease suspension , and clean brake pistons , but only done a thousand miles this year so will change oil and filter. Got to sort a electrical problem out, it has a drain somewhere it will go from fully charged to flat in two days if I don't use it , it charges up fine when running battery is new , so should keep me busy over winter, my son has a derbi cross city 125 now so I'll be servicing that at some point, it's his only form of transport for work and colledge so probably on a weekend feel sorry for the bike as it's has a hard life being ridden within a inch of its life 😨
39
« on: 07 November 2019, 01:13:29 pm »
I also brought a tft dash , and can confirm it's a brilliant piece of kit, took 15 minutes to install plug and play. It's very clear with plenty of options . I was having trouble reading the old clocks with the multi gauge so it's a great upgrade. Well built and simple to use , you don't need a degree in i.t to use it😊. Highly recommended.
40
« on: 12 October 2019, 07:26:48 pm »
that's the tip up senser or overturn senser, it's behind the battery a little black box, you might have disturbed it , if you had the battery of
41
« on: 24 September 2019, 07:22:27 pm »
Brilliant piece of kit , well done
42
« on: 22 September 2019, 04:42:19 pm »
Looks a good ride , enjoy
43
« on: 12 September 2019, 09:54:12 pm »
Agreed , cheap it wasn't . But I'm chuffed with it.
44
« on: 12 September 2019, 05:09:33 pm »
£420 with postage, that was with a dent in the side where the tank slipped out my hand when doing some work on the bike.😠
45
« on: 12 September 2019, 01:33:02 pm »
They are the finishing touch , 26 East Hanningfield road , Rettendon, Chelmsford, Essex cm3 8eq, 01245400918, email , colinthefinishingtouch@yahoo.co.uk , there is a Webb site.
46
« on: 11 September 2019, 01:39:59 pm »
Already got the mr sheen 
47
« on: 11 September 2019, 10:56:12 am »
Just thought I would recommend the finishing touch paint shop who did a great job on my tank.
48
« on: 31 August 2019, 08:20:31 pm »
Just looking on ebay, there's a gen 1 for sale, seller says its registered as ulez compliant with tfl, so looks like it can be done. Item number 223625794181
49
« on: 30 August 2019, 06:15:54 pm »
Absolutely brilliant this , I'll be getting g one
50
« on: 20 August 2019, 11:45:13 am »
Rode back from Scarborough. Started off in the rain. Tried to make a bit more of a ride out of it, as just A1'd it on the way up as time was tight. A few good B roads south of the A64, were quite enjoyable considering the wet conditions. The roads had dried out a bit before the Humber Bridge, and the temperature noticeably rose as we got south. One of my pals has recently moved to Norfolk, so in no time at all, he was peeling off east, as we went west to Peterborough and the A1 and boredom. A cross country whizz to Buntingford, livened things up a bit, before the M11/M25 superslabs got us back dahn sarf. Drying the tent out will be tomorrows first job.
A 507 by any chance, great road
|
Show Posts
