Bikes, Hints'n'Tips > FZS600 Fazer
Carbs
bozboz:
Does anyone know for a fact if the internals of the boxeye/foxeye carbs are different?cheers
Sent from my SM-A415F using Tapatalk
BBROWN1664:
Have a look at the yamaha workshop manual in the downloads section for the 100% definitive answer but I believe they are identical apart from the main jet size which is so close, it was probably just changed for manufacturing reasons.
All parts in and complete carbs are interchangeable between the fox and box models.
unfazed:
Carbs are the same, all jets sizes are the same.
The main difference is in the float height with the 2000 - 2003 models set to have the fuel level 1mm lower.
The 2002-2003 have a different the pilot screw which is set to 2.5 turns out whereas the 1998 to 2001 are set to 2 turns out.
BBROWN1664:
--- Quote from: unfazed on 19 September 2021, 01:24:42 am ---Carbs are the same, all jets sizes are the same.
The main difference is in the float height with the 2000 - 2003 models set to have the fuel level 1mm lower.
The 2002-2003 have a different the pilot screw which is set to 2.5 turns out whereas the 1998 to 2001 are set to 2 turns out.
--- End quote ---
:agree
Mike_2002:
I know this is an old post, does anyone know which way to adjust the pilot screws to lean out the tick over.
The reason I'm asking is I have fitted a jet kit with bigger pilot jets and it stinks on tick over, smells like to much fuel.
Navigation
[0] Message Index
[#] Next page
Go to full version