This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - John Silva
26
« on: 14 October 2014, 10:16:19 am »
The poop has got flushed away. 
28
« on: 24 September 2014, 01:16:37 pm »
Sorry cant make it as I work lates, I have missed all the bike nights this year. 
29
« on: 15 August 2014, 07:57:54 pm »
and wanted more
30
« on: 12 August 2014, 01:09:50 pm »
It is a good as I've been for the last several years but unfortunately I now work all day Saturday so cant go 
31
« on: 05 August 2014, 02:31:36 pm »
Hi thanks to Kebab19 I now have a well sorted bike.
Well I think I do as I really haven't put much mileage on her just yet.
The few miles I have done made her feel a lot more precise.
I will have to fiddle and tweak her to get the best out of her but she doesn't feel so saggy now.
32
« on: 15 July 2014, 01:05:44 pm »
I've had the cover off many times and simply reused the old gasket and lost some of it and still no problems.
33
« on: 15 July 2014, 11:19:03 am »
Looking to change to the 'safer' 12mm set-up.
Was reading posts on here about it and someone listed the required part number as 90891-101124, but when I did an Ebay search, the part number is shown as 90179-18006. Can someone tell me which, if any, is correct? or the correct one if neither.
Also, being a technical/mechanical numpty, what's the best/proper way to check the current nut condition? Is it simply take off a front sprocket cover (how?) and inspect? What am I looking for?
Thanks in anticipation.
Almost correct the part number is 90891-10124 Yes take the sprocket cover off and check to see if you still got an old nut fitted before buying new.
34
« on: 29 May 2014, 09:19:56 pm »
OEM are one hose from master cylinder to splitter then two hoses to callipers. 3 hoses in total. Race setup is two hoses from master cylinder straight to the callipers. 2 Hoses in total thus cheaper than OEM Simples 
35
« on: 29 May 2014, 10:04:50 am »
The website is closed but just turn up on the day n pay on the airfield.
The address of which is: Dalton Barracks Barrow Road, Abingdon, OX13 6JQ
I will be there at 10.30ish
36
« on: 13 May 2014, 05:47:19 pm »
I've done ever one of them so far and have registered for this years. 
37
« on: 28 March 2014, 09:46:39 am »
Sherlock
38
« on: 23 March 2014, 10:54:05 am »
Simples
39
« on: 20 March 2014, 04:39:45 pm »
Converse
40
« on: 14 March 2014, 06:48:14 pm »
Myopic
41
« on: 14 March 2014, 03:11:39 pm »
+1
I try not to get caught in the rain but my 550 has been OK so far.
42
« on: 14 March 2014, 03:05:25 pm »
Welsh
43
« on: 13 March 2014, 06:09:09 pm »
Cross
44
« on: 13 March 2014, 10:07:05 am »
Hairy
45
« on: 12 March 2014, 10:15:24 am »
Beast
46
« on: 10 March 2014, 09:46:51 am »
Stake
47
« on: 09 March 2014, 09:23:15 pm »
 Morpheus motorcycles in Kingswood are brilliant as they repaired my puncture while I waited last year.
48
« on: 07 March 2014, 09:18:04 pm »
Boatrace
49
« on: 05 March 2014, 08:01:20 pm »
The ambulance for being in the wrong lane.
(Its always hell in that part of Brizzle)
50
« on: 05 March 2014, 07:58:07 pm »
Law
|
Show Posts
