PackieAbout a mile as the crow flies west of the Airport.Where abouts are you?
I just had my nut & sprocket replaced by Yamaha free of charge - thanks, Yam!This is on an '00 Fazer, medium to high mileage, and scruffy in appearance. The only cost to me was the fuel, and 40p for a missing cover bolt. As for the nut, if in doubt, phone Yamaha UK up. If there's no record of any warranty work being done on yours, chances are they didn't do it. If so, you can go to a dealer and have it inspected and replaced for free. Insist that it's a manufacturing problem Yamaha know about, and are replacing free of charge!!
Quote from: ChristoT on 30 January 2013, 09:59:49 amI just had my nut & sprocket replaced by Yamaha free of charge - thanks, Yam!This is on an '00 Fazer, medium to high mileage, and scruffy in appearance. The only cost to me was the fuel, and 40p for a missing cover bolt. As for the nut, if in doubt, phone Yamaha UK up. If there's no record of any warranty work being done on yours, chances are they didn't do it. If so, you can go to a dealer and have it inspected and replaced for free. Insist that it's a manufacturing problem Yamaha know about, and are replacing free of charge!! Nice work, not all the shops have done that in the past!
Quote from: darrsi on 30 January 2013, 10:18:05 amNice work, not all the shops have done that in the past! My local dealer denied any knowledge of it and offered me the original part as a replacement because "that's what it says on the system".
Nice work, not all the shops have done that in the past!
Just stumbled across this thread and has me concerned! 2002 foxeye 600 - likely to be a problem or is it only the box eyes that are affected?
Soo many numbers on the Yam website! Any idea which is the best one? Don't really wanna be taking the cover off in the piddling rain if i have to to measure the nut!
Quote from: Jazz999 on 30 January 2013, 11:25:40 amSoo many numbers on the Yam website! Any idea which is the best one? Don't really wanna be taking the cover off in the piddling rain if i have to to measure the nut!Who said measure the nut? If the mod HAS been done, you're fine, if not, they'll want a dealer to inspect it anyway. Either that, or phone you local dealer, ask them direct. And if they're uncooperative, ask them for Yamaha's number.
Mucking around with a socket set in the pouring rain, or making a phone call from the comfort of an armchair? I know which I consider to be less hassle!!
lol! I think its the going to the dealears, booking it in, waiting around etc. :p
Quote from: alexanderfitu on 30 January 2013, 01:34:40 pmlol! I think its the going to the dealears, booking it in, waiting around etc. :pIf the mod's been done, chances are it'll be on Yamaha's records. If the bike isn't on the records, then chances are it wasn't done. Booking in isn't generally a problem, and the did my bike in under an hour - and that was with 2 bikes in front of me too (different jobs on theirs).Darrsi - what's the point in disturbing the gasket, and dismantling the cover if it has possibly been done? I don't know how good you are with a toolkit, but I'm a noob, and prefer leaving stuff like that to those who know what they're doing.