Date: 21-05-24  Time: 08:26 am

Recent Posts

Pages: [1] 2 3 ... 10
1
FZS600 Fazer / Re: Engine Rattle
« Last post by darrsi on Today at 06:09:39 am »
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


I was gonna say check the sprocket, sprocket nut and chain, for wear. May even just be the rear wheel alignment out too?
But when you mention "stationary" do you mean completely still, or with the bike on the centre stand, bike in gear and the rear wheel moving?
2
FZS600 Fazer / Re: Engine Rattle
« Last post by BBROWN1664 on 20 May 2024, 08:38:55 pm »
What is your idle speed set to?
Idle speed set to 1500rpm. Once the engine is hot it tends to idle at around 1800rpm


idle speed once warm shoulf be about 1250
3
Fazer 1000/FZ1 corner / jerky ride fuel system ,road surface or snatchy gearing
« Last post by chaz46 on 20 May 2024, 08:33:29 pm »
ok, managed to get out on the thou today.  2002 FZS


main road and country lane short trip, Im not sure of the problem, or not..
went ok on the main road, got over the limit on a straight (the roads around here are pathetic),
turning on to the country lanes to my unit the ride seemed jerky.
fuel system problem?  could just me being bounced and jerking the throttle.
gearing? cant go too fast as you get bounced off the seat.
or suspension?


so, its not been ridden for a few years, the carbs have been stripped and cleaned, the filter replaced, new fuel, pump cleaned and working.
only been run up on the ramp a few times. Im not sure if as the road is very lumpy, I was getting bumped around and moving throttle or the wheel getting jerked about.
what sort of speeds to gear am I looking at, 40mph speed limit3rd or 4th gear.
or maybe soft suspension?
thoughts?
4
Fazer 1000/FZ1 corner / Re: Ohlins YA-009 rear shock for fz1: fitment
« Last post by b1k3rdude on 20 May 2024, 06:20:14 pm »
ta.
5
FZS600 Fazer / Re: Engine Rattle
« Last post by Lemongrab on 20 May 2024, 05:09:33 pm »
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


Check the front sprocket nut ;)
Did cross my mind, I'll take a look.
6
FZS600 Fazer / Re: Engine Rattle
« Last post by Lemongrab on 20 May 2024, 05:08:22 pm »
What is your idle speed set to?
Idle speed set to 1500rpm. Once the engine is hot it tends to idle at around 1800rpm
7
FZS600 Fazer / Re: Engine Rattle
« Last post by Gnasher on 20 May 2024, 08:54:41 am »
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.


Check the front sprocket nut ;)
8
FZS600 Fazer / Re: Engine Rattle
« Last post by BBROWN1664 on 20 May 2024, 08:47:47 am »
What is your idle speed set to?
9
FZS600 Fazer / Re: Engine Rattle
« Last post by Lemongrab on 20 May 2024, 08:39:16 am »
Definitely more of a knock or clatter than a rattle.
Sounds like its coming from the front sprocket cover.
When you touch that area, you can feel the knock.

Does it in drive and when stationary.
10
Fazer 1000/FZ1 corner / Re: Ohlins YA-009 rear shock for fz1: fitment
« Last post by Gnasher on 20 May 2024, 08:30:16 am »
That is the wrong bracket for the bike, it should be a flat L shaped plate.  It should also be mounted on the rear foot peg hanger mounting bracket bolt, so the adjuster knob is parallel to the frame and pointing to the rear of the bike.  Contact Harris Performance, they're or were the UK importers for Ohlins, they'll be able to get you the correct bracket, or have one made.  I'll speak to you off line and you can then get it sorted  :thumbup   
Pages: [1] 2 3 ... 10