Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: tomjimtom on 08 October 2011, 11:15:01 am

Title: Swing arm bolt
Post by: tomjimtom on 08 October 2011, 11:15:01 am

Hi, going to grease my swingarm bearings and such, but before I go to halfords an buy every socket between 25 and 32, can someone tell me what size the nut is? :)

Also, do i need to take the swingarm off completely? I've already greased the suspension etc, and got the rear wheel off :)


Thanks
Tom

Title: Re: Swing arm bolt
Post by: bludclot on 08 October 2011, 07:17:50 pm

 
the swingarm nut takes a 27mm socket. you'll have to remove the arm in order to check / grease the two main bearings. re-torque to 125nm / 92lbft.
 
if you are local to portsmouth i have the tools you can borrow.

Title: Re: Swing arm bolt
Post by: bludclot on 09 October 2011, 09:53:38 am

 
when i remove a swing arm i masking tape an old newpaper to the chain side of the arm for removal and re-fitting - it prevents the chain marking the arm.

Title: Re: Swing arm bolt
Post by: tomjimtom on 09 October 2011, 04:43:39 pm

Thanks, got the socket today on the way back from work :)

I'm not local enough I'm afraid, especially with a rear wheel missing  :lol but thank you for the offer.

Looks like I'll have it all apart then, which means EVERYTHING will be covered in grease :)

Thank you again,

Tom