Author Topic: what did you do with your fazer today ? (Read 1604972 times)

sinto · « **Reply #5600 on:** 02 February 2016, 04:45:30 pm »

Quote from: mr self destruct on 02 February 2016, 02:42:56 pm

Quote from: mr self destruct on 01 February 2016, 06:20:47 pm
Since snapping an exhaust stud on the 4th January, I finally got round to drilling it out.
Looked at the threads covering the subject on here, loads of good advice by the way, and had a go at repairing it with the engine in place.
Managed to drill out the old stud, but fucked up the tapping of the head so am going to drill it oversize and helicoil it back to M6.

Or rather, get a professional to do it, because if I fuck this up I'll have to get the head welded.

Took it to a specialist, he said I'm fucked and need a new head.

Did you not come across the thread where a few guys have used the other side to drill into thus creating a sound place for your bolts?
Anutz done it I'm sure and a few others.
I'll try a look for it later but I think it's in amongst another thread

unfazed · « **Reply #5601 on:** 02 February 2016, 05:21:06 pm »

Which port is it? You could possibly drill 2 or 3 at 180 degrees as there are blanks

mr self destruct · « **Reply #5602 on:** 02 February 2016, 09:07:53 pm »

Quote from: sinto on 02 February 2016, 04:45:30 pm

Did you not come across the thread where a few guys have used the other side to drill into thus creating a sound place for your bolts?
Anutz done it I'm sure and a few others.
I'll try a look for it later but I think it's in amongst another thread

Do you mean the method unfazed is mentioning by turning the plates round? Its the far right port unfortunately so that's not an option.

I've got my hands on a good quality helicoil insert but it might be too big. There might not be enough material on the head. What do you guys think?

Looks like an M10 on the outside which might be too big to get away with. Should I redrill it to an M8 and fit a bigger stud?

unfazed · « **Reply #5603 on:** 02 February 2016, 10:06:25 pm »

That insert looks too big
I would try an M7 first

mr self destruct · « **Reply #5604 on:** 02 February 2016, 11:46:03 pm »

Agreed. I've just got home from work and compared it to the head and it's way too big. M7 it is then.

mr self destruct · « **Reply #5605 on:** 03 February 2016, 03:10:43 pm »

Managed to successfully tap it out to M7 this morning so will use these little beauties!
M7 to M6 studs.

http://www.ebay.co.uk/itm/Scooter-Moped-M6-x-M7-Exhaust-Stud-and-Nuts-/400651035633?hash=item5d48a9a3f1:g:tBgAAOSw37tWAWLP

esetest · « **Reply #5606 on:** 03 February 2016, 03:37:17 pm »

Rode it to Glastonbury , stopped for lunch , came back via Westbury sub mendip , Cheddar gorge and Chew valley Lake , warm when the sun was shining .I

pilninggas · « **Reply #5607 on:** 03 February 2016, 07:58:00 pm »

Repaired the disc bolt holes on the rear wheel (took the disc off to paint the wheel and needless to say the ally came out with bolts).

Use a cheap helicoil kit, worked a treat.

JKay · « **Reply #5608 on:** 04 February 2016, 07:18:50 pm »

Quote from: fazersharp on 26 January 2016, 10:33:47 pm

Quote from: JKay on 26 January 2016, 06:02:15 pm
I'm convinced enough to have paid for it especially as I ride all weathers every day if I was a fair weather rider I probably wouldn't bother as your bikes don't get so filthy and corroded by the salt therefore easy to clean yourself
There is no doubt that ACF50 is the best stuff - I use it myself, but spraying it everywhere just looks a bit slapdash IMO

Hey guys the before/after pictures are on the all year biker Lincoln face book page(too thick to do links on me phone)

nickodemon · « **Reply #5609 on:** 07 February 2016, 10:13:06 pm »

Fitted led indicators

Turned into a bit of a pain because the inline indicator resistors i bought were crap, so i got an led relay and they now work a treat.

JKay · « **Reply #5610 on:** 07 February 2016, 10:28:21 pm »

Fitted twin horns to the fazer and can't wait to do the daily commute ,those cagers won't knows what's hit em

slappy · « **Reply #5611 on:** 10 February 2016, 06:29:22 pm »

Took it for the mot, passed as usual

Billy Balthorpe · « **Reply #5612 on:** 10 February 2016, 07:56:42 pm »

Left it out in the rain, again. It must think its done something wrong, all these months where the garage was the place it slept. But alas, the garage is full of bikes who would not suffer so well in the rain.

Sorry Fazer.

Cellarman · « **Reply #5613 on:** 10 February 2016, 07:57:25 pm »

Quote from: JKay on 07 February 2016, 10:28:21 pm

Fitted twin horns to the fazer and can't wait to do the daily commute ,those cagers won't knows what's hit em

What horns did you fit? thinking of fitting some, were they plug & play or did you have to fit a relay, apologies for all the questions

pilninggas · « **Reply #5614 on:** 10 February 2016, 08:46:46 pm »

mot'd my bike and it passed (like yours slappy).

Went for a quick blat around South Gloucs with a mate, him on his GSX1250F.

JKay · « **Reply #5615 on:** 10 February 2016, 09:40:16 pm »

Quote from: Cellarman on 10 February 2016, 07:57:25 pm

Quote from: JKay on 07 February 2016, 10:28:21 pm
Fitted twin horns to the fazer and can't wait to do the daily commute ,those cagers won't knows what's hit em
What horns did you fit? thinking of fitting some, were they plug & play or did you have to fit a relay, apologies for all the questions

Google "hootaz" cheap but loud no relay fitted mounted one where the standard one was and the other on the side of the radiator just to test then I'll mount it ala pats motorcycle page,only had to make an extension from the original connection

HarryHornby · « **Reply #5616 on:** 13 February 2016, 12:20:27 pm »

Took it for an MOT and it PASSED!!

celticdog · « **Reply #5617 on:** 13 February 2016, 12:53:51 pm »

Quote from: HarryHornby on 13 February 2016, 12:20:27 pm

Took it for an MOT and it PASSED!!

Ditto!

tex · « **Reply #5618 on:** 13 February 2016, 12:57:32 pm »

Noticed the front and rear discs are going rusty , so gave them a good clean

Skippernick · « **Reply #5619 on:** 13 February 2016, 02:09:55 pm »

Quote from: celticdog on 13 February 2016, 12:53:51 pm

Quote from: HarryHornby on 13 February 2016, 12:20:27 pm
Took it for an MOT and it PASSED!!

Ditto!

Ditto

brooker81 · « **Reply #5620 on:** 13 February 2016, 03:28:57 pm »

Went for a blast on the 6 the misses joined me did about 45 mile it was quite cold out but a nice run follows by a as full English breakfast at the local greasy spoon I'm that stuffed I won't be eating anything for the rest of the day.

markie_wales · « **Reply #5621 on:** 13 February 2016, 05:15:35 pm »

Brought it, rode it ~120 miles home, got cold, made it filthy, but kept it upright

Cheers

Markie

NorthWestern · « **Reply #5622 on:** 13 February 2016, 05:24:41 pm »

Wanted an adjustable clutch lever but didn't fancy spending £20 on a used ZX9 Clutch lever so fitted this!

Then washed it and went for a spin.

Panzerbuilder · « **Reply #5623 on:** 13 February 2016, 05:26:39 pm »

Washed it.

Now it has to be left in the garage all week. No riding for me.

Plus finally took photos of the new extenda and belly pan.

Comments please.

NorthWestern · « **Reply #5624 on:** 13 February 2016, 05:38:48 pm »

your fence could do with treating...