This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - bingo600
Pages: [1]
1
« on: 08 February 2018, 06:46:21 pm »
thanks guys il give it bash, i dont suppose it would cause any damage if it doesnt work..
Thanks
2
« on: 08 February 2018, 03:00:17 am »
Alright guys, Iv'e had a little mishap and managed to cut the side of my generator cable, ive cut through 2 white wires and cut into blue a little. there looks to be 3 white 1 yellow and 1 blue
Just wondering if these white cables do the same thing, can i just solder them back up?
3
« on: 05 February 2018, 01:27:08 am »
I also ordered a pair of Ugly Brothers Motorpool protected motorcycle jeans, i messaged the seller who has lots of positive feedback He stated that they are from the same factory where ugly brothers have them made in China. which would mean theyre grey market https://www.dhgate.com/wholesale/search.do?act=search&sus=&searchkey=motorpool&catalog=#Homesearch201403there also a bunch of stuff like alpinestars gear etc even some Ruby and Simpson helmets, but i dont think i would wear a fake helmet in a hurry, but.. i guess a lot of helmets are made in China, so i guess theyre made just in the same way others are
4
« on: 05 February 2018, 01:25:04 am »
Regarding the points made about it possibly not turning up or having a problem.. I have read that the DHGate aftersales support is very much on the side of the buyer and especially if the item is fake the seller doesnt have a leg to stand on. Also.. the money is held by DHgate for 30 days until after delivery is accepted.. so obviously if i dont get the item i wont click that i have received delivery. and the majority of the sellers i have looked have also positive feedback so i dont doubt that i would get the product There is also a forum for Dhgate watch this space 
5
« on: 03 February 2018, 02:50:19 am »
..
7
« on: 02 February 2018, 09:27:49 pm »
ahhh i see, great tip!
i did spend ten minutes using pliers and a spanner to try and pull it but in the end i did use a screwdriver sideways and pushed it down.
8
« on: 01 February 2018, 02:39:22 am »
ok so it turns out wez did get back to me very quickly, unfortunatly my email decided it was junk and didnt let me know lol
so im guessing between the two youtubers (me and matt7chunk aka suffolk rider) its a race into making a vid on how they fit lol
holy crap ive got even more to do on that front end after recent headlight and speedo issues ---- F**K
As it happens these are the lines i bought for mine but my bike isnt on the road yet, looking forward to seeing your review on them
9
« on: 30 January 2018, 06:37:39 pm »
great stuff thanks for that
10
« on: 30 January 2018, 04:10:39 pm »
Have a search on here as there are a few posts about it and if you put it on without any swearing then you have not put it on properly
Thanks mate, i found a thread and i got it back on the right way, and yeah there was a few buggers and c***s in there haha
11
« on: 30 January 2018, 03:54:10 pm »
Do any of you guys happen to have saved any basic wiring diagrams? or just for lighting?
12
« on: 30 January 2018, 03:49:39 pm »
@disorderlypunk its not fitted yet but yeah thats the plan
13
« on: 29 January 2018, 08:18:11 pm »
Yeah i think it would be a PITA to turn with clips-ons, the balance is off, not practical for city[/size]riding which is mostly what il be doing. the tank is so bulky and restrictive. Il try them on top of the yoke and if i still dont like it i can easy put renthals on. I think it will look great either way.[size=78%]
14
« on: 29 January 2018, 06:59:19 pm »
15
« on: 29 January 2018, 01:46:01 am »
bugger.. i just seen whats missing, the very top piece above the spring is what connects to the frame, has a little foot on it with the piece with the 2 holes connected to it.
this makes sense as it looks like the hole of that piece will act as a lever
i have it bolted to the frame with the small part with 2 holes.. i really should take photos of things before i take them off
now to search the garage for that piece, great fun
17
« on: 29 January 2018, 01:36:01 am »
looks a fine job! nice one
18
« on: 28 January 2018, 11:18:40 pm »
after looking at it this morning i dont think i really need to glue the foam to the plastic as there are enough bumps to hold it in place
(and my carpet fitting glue has disapeared)
i am calling in someone that owes me a favour and used to recover MX seats to give me a lesson (or do it for me) as i already see problems arising
might have to go pick up an compressed air stapler as mine isnt up to scratch
when it comes to engines and metal im fine but when it comes to anything art and crafty im sh*t
If you need a seat, I removed mine, it wont be getting used again. we could work something out or on topic, i would say the contact adhesive would work a treat, its just a strong but soft glue it wont melt the foam.
19
« on: 28 January 2018, 11:09:12 pm »
Hi Guys, I picked up a real nice Fazer last month, iv'e always liked them, i love the shape of the frame and tank and always thought they were ripe for some modification Its not a big project Ive practically zero mechanical experience, so its just a wee short back and sides lol im out of work long term sickness so this passes some time im not convinced on the clip-ons.. i might go for renthals. Il see how it rides with clips ons to see how i like it. plans are going fast, most of the parts are here and the engine casings, wheels and stantions are in for paint, both the seat and the parts, trimmed front guard, should be back to me on tuesday next things to do, a design for the tank.. i think red would look awesome, all of the bike will be black, but i also love the look of bare metal tanks. RFID ignition to be fitted, find a muffler, rear hoop to be welded and just a little wiring and its ready to go... Once its on the road il look at replacing the airbox, possibly a nicer shaped rear swingarm heres some pictures, i only have a few, but i will take some more when i collect my painted parts over the next couple of days this was the day i got it, i immediately gave it a diet.. picture in B&W just to see what it was like with grey tank  the seat chop..   I donr this after a week or so.. but its since been taken apart again to have parts painted  
20
« on: 28 January 2018, 10:13:53 pm »
Hi guys, i took off the side stand for painting, but now ive put it back on its limp and hanging halfway down and doesn't spring back up (sounds so wrong  ) when i kick it back. i guess i haven't fitted it correctly but it doesnt immediately appear like there is another way to fit it.. so right now im a bit baffled It look like the washer attached to the spring goes where the bolt is to attach it to the bike and the other end of the spring attaches to the hook further down. can anyone help me with this who has taken it off before? or if one of you kind gents take a picture of the stand extended from underneath that would be amazing!! Thanks in advance Neil [/size]
21
« on: 03 December 2017, 05:27:15 pm »
thanks, and yes thats exactly what i have done, ive gone naked and plan on having the top yoke clutter free and having a motogadget mini speedo fitted to the person who asked about a button, no there is nothing and the keys appear to be just an ordinary key so im thinking it doesnt have one which is great news
22
« on: 03 December 2017, 01:19:28 am »
Hi lads, I want to get an RFID ignition, though its not advised with bike with factory immobiliser, im not sure of the bike is fitted with one? and if it does how can i deactivate it?
Regards
23
« on: 03 December 2017, 01:15:33 am »
Hi folks!!
Heard about the forum through a motorbike vlog on YouTube so thought I would join. Seems like good crack from what ive been reading so far  .
I have a 02 Fazer FZS1000 which I've had for about 2 years now and fall in love with more everyday  .
Hoping to get involved in some of the festivities in the near future !
Cheers
Robin
That's a gorgeous bike !
24
« on: 03 December 2017, 01:10:59 am »
Evening Gents I was just browsing around trying to find some info on my bike and found the forum. Just got a Fazer last week, hugely impressed! its my second bike, first bike was a 84" Honda Nighthawk, Iv'e already got started on stripping the bike down, my plans are as follows.. Custom made single seat and cut away excess frame, install a rear hoop with brake and indicators built in clipons, new switches and brake and clutch levers Led headlight built in indicators Motogadget speedo built into top yoke Motogadget RFID ignition this is the last pic i took, i put on the headlight to see how it looked, but now more parts are taken off and gone to get sprayed If anyone can tell me if this bike has an immobiliser? i cant find any info on that so far Regards
Pages: [1]
|
Show Posts
