This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - nedwood
Pages: [1]
1
« on: 14 July 2018, 09:07:40 am »
Can any of you guys give me advice about my seat. I only weigh about 10 1/2st so not much meat on my arse. I can ride for about 25-30 mile but by then I have to stop because my ars e is hurting so much (yes I can hear you all laughing) but after this i can then only ride about 10 - 15 mile before it have to get off again - it's bloody annoying. Anyone tried reshaping the seat of having it done professionally ?
2
« on: 25 February 2018, 01:31:39 pm »
Had very similar probs with my 600.New chain solved the knocking.
3
« on: 25 February 2018, 01:17:05 pm »
O8 R6 shock
4
« on: 25 February 2018, 01:13:34 pm »
Been thinking about using l8tr 26th shock on my carb version 600 but I am only light weight say 150 to 155lbs all up so will the 46 shock need a lighter spring for my weight.Also has any one for a contact or drawings to make the new dog bones and top hat spacers ?.
5
« on: 11 June 2017, 05:44:15 pm »
My worry is that it has never done this before ?, strange that it`s flagged it up out of the blue  .
6
« on: 11 June 2017, 04:58:26 pm »
A question for Andy Meldrum. I have just gone to log on and my computer protection has flagged the site up as not being secure. Andy can you tell me if this is the case please.
7
« on: 21 January 2017, 04:31:24 pm »
Thank you Tommy for taking the time to post all your advice, it`s nice to know there are really good, genuine and helpful people on this site and again a big thank you to all you other fellas that gave me helpful info, cheers.
8
« on: 21 January 2017, 02:02:42 pm »
Thats interesting Tommy. My Fazer is a 99` model so i dont know if the spring change would apply to mine but anyway it would be interesting to see your complete post on it, cheers mate.
9
« on: 21 January 2017, 12:10:42 pm »
Oh thats good news ! cheers Jules, you have just saved me 88 quid been looking at some Hagon replacements so can use my spare cash now on some new brake lines !. thanks for your quick reply pal - off to the garage to put my forks back together.
10
« on: 21 January 2017, 11:34:24 am »
Rechecked my spring length and they are both at 324mm so according to the manual they are 5mm over limit. What recommendations would you lads give regarding replacement, go for std or different type of spring. I`m only a light weight jockey at 10.4 stone soaking wet. What suppliers have you used?. Thanks. .
11
« on: 20 January 2017, 07:43:29 pm »
Changing fork oil today, measured my springs, in the manual it says 1119mm. but mine are both exactly 1124mm. i could understand them being shorter but longer ??. its on a 99` fazer 600. any ideas ??.
12
« on: 19 January 2017, 08:06:35 pm »
Took my forks off my 99` 600 to do an oil change. taking them into work tomorrow to flush them out with some kerosine because their was a fair bit of black sludge in the oil. Will give the outers a bit of a polish up while i have them on the bench. I am going to try 15w oil in them as a lot of you lads on here seem to recommend that weight as giving an improvement on the front end which i had some concern about my front end used to feel like it was folding under some times going in to slowish corner anyway we shall see.
13
« on: 08 January 2017, 10:35:56 pm »
ok, cheers all you guys. Thank you very much, so now you have given me quite a few choices on how to do it.
14
« on: 08 January 2017, 03:23:31 pm »
Hi Folks, can anyone suggest what method they have used to remove front wheel and forks from my 600.
I need to repolish the fork bottoms and change the fork oil but i cant jack the front up under the engine due to the down pipes being in the way. Any ideas gladly welcomed, ta.
15
« on: 25 July 2016, 07:21:49 pm »
Ah, nice one, thanks very much for your help.
16
« on: 24 July 2016, 05:44:53 pm »
Hi, can some one tell me is there a special screw driver / tool to adjust the pilot air screws on my 99 Fazer 600 while the carbs are on the bike. I can get to no. 1,2,4, but just can`t do no 3,which is above starter motor. Any ideas or tips please.
Pages: [1]
|
Show Posts