Author Topic: Renthal bars (Read 1166 times)

fatbloke62 · « **on:** 24 July 2020, 03:05:26 pm »

Hi ,i know the renthal 758 bars seem to be the most popular choice for the gen1, 1000 , has anyone fitted 754 bars ? , are there any issues with these regarding cable and brake line length or any fouling on the fairing

Trebus · « **Reply #1 on:** 24 July 2020, 06:09:19 pm »

754s on mine which fit fine with standard length cables / hoses. I have GTYR risers though which are a bit lower than standard.

fatbloke62 · « **Reply #2 on:** 24 July 2020, 06:42:22 pm »

Cheers trebus ,its time for me to go slightly higher for the ride comfort

Trebus · « **Reply #3 on:** 24 July 2020, 08:03:59 pm »

I’ll try and take a picture tomorrow.

robbo · « **Reply #4 on:** 24 July 2020, 08:31:16 pm »

Quote from: fatbloke62 on 24 July 2020, 06:42:22 pm

Cheers trebus ,its time for me to go slightly higher for the ride comfort

If you're happy with the hand position on your current bars, why not just get a set of bar risers. I'd of thought 754's on stock risers would have made things a bit tight wiring harness wise, bearing in mind they're wider than stock and 35mm higher than 758's. Just a thought.

Trebus · « **Reply #5 on:** 25 July 2020, 10:22:18 am »

Pictures as promised 🙂

kebab19 · « **Reply #6 on:** 25 July 2020, 03:55:16 pm »

With 754s, the control cables will all stretch ok but the standard length brake hose setup might not be quite long enough. I had one inch longer braided lines which reached the M/C fine, not sure it would have with standard length hoses.

fatbloke62 · « **Reply #7 on:** 26 July 2020, 12:50:48 pm »

Thanks for the info and replies guy's , I never considered bar risers

Author Topic: Renthal bars (Read 1166 times)

fatbloke62

Renthal bars

Trebus

Re: Renthal bars

fatbloke62

Re: Renthal bars

Trebus

Re: Renthal bars

robbo

Re: Renthal bars

Trebus

Re: Renthal bars

kebab19

Re: Renthal bars

fatbloke62

Re: Renthal bars