This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - gnm
1
« on: 25 March 2018, 10:27:06 pm »
Did mine at weekend after fitting aftermarket exhaust, you can get the cables off without removing the servo just use angled philips screwdriver to remove the cover over the cables, pull the outer cables back and slip the inners off the pulley
2
« on: 19 March 2018, 10:17:01 pm »
Sorry forgot to say it’s off gen 1 1000
3
« on: 19 March 2018, 10:14:14 pm »
Ok thanks for that
4
« on: 18 March 2018, 11:10:01 pm »
Hi all, I’ve fitted an aftermarket link pipe and it doesn’t have the bracket for the centre stand to stop against. It stops in the same position anyway but will it do any harm without the stop
5
« on: 18 March 2018, 10:54:34 pm »
Hi all, fitted a new link pipe to gen2 and it doesn’t have the bracket on it for the stand rubber to stop against. Will this matter as it stops at the right place anyway or will I need to make up a bracket for it?
6
« on: 18 March 2018, 10:44:27 pm »
Link pipe for after market end can £30 posted
7
« on: 01 March 2018, 04:17:55 pm »
All bits gone now
8
« on: 27 January 2018, 09:16:33 pm »
Can’t get pictures to upload. If you have WhatsApp on your phone give your number and I’ll send them or email. The clutch cable is not genuine don’t know about exup as I took it off bike and put aftermarket one on cos it was slightly frayed at one end. The picture are on gumtree.
9
« on: 27 January 2018, 08:23:35 pm »
Hi all, recently changed to a gen2 so have some bits for sale. Fairing lowers with brackets/bolts no cracks or repairs but a few scratches and marks on lacquer £80 + post. Crash bungs £20 +post. New clutch cable and used exup cables £10 the pair +post and 2 workshop manuals one Haynes and one copy of Yamaha manual £12 each +post the Yamaha ones a bit heavy so post won’t be cheap for it. iPhone won’t let me upload photos for some reason but they are on gumtree you could see pics there or I could WhatsApp them to anyone interested.
10
« on: 14 January 2018, 12:23:44 am »
Ok thanks for reply’s, get it next week so will try it see what it looks like.
11
« on: 13 January 2018, 04:25:38 pm »
Hi all, I’m trading in my gen one for a 2011 gen 2. Question is will the stubby end can from gen one fit the gen 2 if I got a new link pipe or would I be as well buying a new system?
12
« on: 03 January 2018, 11:48:25 pm »
Sure enough thermostat stuck, battery flat. New optimiser arrived sat charged it up, topped up coolant and all seems ok now
13
« on: 24 December 2017, 11:01:36 pm »
Ok cheers will try that tomorrow. Was turning over very slow like flat battery but battery was ok beforehand
14
« on: 24 December 2017, 08:36:10 pm »
Hi all, started the Fazer up last night after about 8 weeks in the shed and left it running for about 20 minutes then it cuts out. When I went to check it there was steam and water coming out from around the rubber overflow pipes behind the exhaust link pipe. I left it to cool down then tried to resart it but only getting a loud clicking from around the positive side of the battery any ideas?
15
« on: 15 May 2016, 09:07:25 pm »
Thanks again all. I've bought some fairing lowers and the painter wanted a code so hopefully he will be able to get it from your info
16
« on: 15 May 2016, 08:11:44 pm »
other sticker under seat
17
« on: 15 May 2016, 07:48:19 pm »
Thanks for that but can't see anything about colour on stickers
18
« on: 15 May 2016, 05:58:46 pm »
Anyone know how to find paint code? There is a sticker on the frame near the front but does not mention colour code. Another sticker under the seat but nothing on it either. It's a 2004 sort of mid blue?
19
« on: 30 April 2016, 01:16:25 pm »
do you have brackets / fittings for fairing lowers ? could you show close up pictures of damage as I am too far away to come and view. what payment method would you use as I would need them posted
20
« on: 02 April 2016, 10:23:15 am »
thanks for that, probably just change all when wheels off anyway.
21
« on: 01 April 2016, 09:49:11 pm »
hi all, just noticed a bit of play on rear wheel bearings, has anyone used the all balls kit from wemoto? also any problems fitting or any special tools needed to fit them?
22
« on: 22 September 2015, 08:02:57 pm »
thanks for the info, will check out these sites
23
« on: 21 September 2015, 09:59:01 pm »
saw this in cannes when passing through on hols. does anyone know if its a yamaha part or some other supplier? any idea if they are still available ?
24
« on: 15 August 2015, 01:06:07 pm »
thanks, found the problem. the 7000 fault came up again this morning so took the cover off to check valve working ok and found one of the new cable liners had slid down the inner cable and melted itself round the pulley. back to normal now thanks again for your reply.
25
« on: 15 August 2015, 09:19:55 am »
any ideas what its likely to be? runs fine up to approx 6000 then just starts to misfire, let throttle off slightly and it goes fine. sometimes runs fine but theres no telling when its going to do it. replaced exup cables, cleaned and lubed valve about 2000 miles ago after 7000 message on tacho.
|
Show Posts