Date: 20-04-24  Time: 17:21 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - tommyteeman

Pages: [1]
1
For Sale & Wanted / Fazer1000 Corbin seat and madstad screen for sale
« on: 20 June 2021, 04:04:19 pm »
Fazer 1000 Corbin seat, straight swap for the original, very good condition.
It has one tiny split at the rear, only noticed it when I was inspecting the condition, never noticed it on the bike.
Price £100 including post.


Madstad touring screen, by far the best touring screen for the fazer1000. No major scratches or gouges, few polishing scratches like all screens. I think new these are @£250. Includes longer fixing bolts because of the extra weight of the screen.
Price £105 including post


I can do both for £200 including post or knock a tenner off if you can collect  ;)
























If your interested in collection I’m in Northumberland, cash, PayPal or bank transfer for payment.


I’m heading down to Mallory park next Saturday so can drop these off to anybody whose near the M1  :)

2
For Sale & Wanted / FOR SALE: 2002, Fazer 1000, 31K, £2000 *SOLD*
« on: 28 March 2021, 04:26:34 pm »
This is my 2002 fazer 1000, pains me to sell it but needs must  :o  bike in Northumberland. Owned this bike since 2007, spec list is as follows -
  • 31300 miles, w/12mnths MOT
  • 2008 R1 front end conversion
  • 6pot callipers, pads have @500 miles on them
  • Maxton GP25 fork cartridge kit
  • Mivv x cone pipe
  • Full Ivan’s kit fitted by Mike
  • Raised rear end (dogbones)
  • Pazzo levers
  • Gear indicator
  • Battery monitor
  • USB connector
  • Good tyres/ C&S etc
  • 4 degree ignition advancer
  • New oil/ filter/ plugs
  • Recent needle steering bearing kit
  • Has a Nitron Road rear shock
All related items to go with bike including standard front end ( minus callipers they are on my rd). Couple of back wheels one is mint that I planned to put on with the next tyre change, 3 screens I think, I’ve got some fairing lowers too somewhere, basically anything Fazer that I have. Small bit of paint flaking from the clutch cover bit on the cam cover, few chips in the tank, overall nice condition though. Getting new MOT next week.


For the eagle eyed amongst you bike has a black swing arm. I was going to replace the swing arm bearings but bought a NOS 2005 swing arm for not much more than a bearing kit ! So still have the original, got the original seat too which is mint


Looking for £2000 the lot.

--------------------------------------------------

Video walk around https://youtu.be/FcKxNIH0Pxw









--------------------------------------------------

[Old images with parts the owner has removed to sell seperatly - bkd]







[added detail from the latest post - bkd.]

3
General / Damaged fairing story
« on: 21 January 2021, 08:59:25 pm »
Sooooo I get a painter to repaint my rd 350 lc2 front headlight fairing, telling him “mind these are like hens teeth, this is a good one and worth probably the thick end of 600 quid” no problem he says.
You know what’s coming........he’s totally wrecked it. Put it in an oven and forgot about it  :'( . These cowls are really hard to get , there’s little to no chance of getting another, he says he’s been looking for one but can’t find a replacement...no shit ! Says all he can do is apologise. I haven’t been to see him yet but I reckon he owes me a wedge of money now,  what do you think ?

4
Fazer 1000/FZ1 corner / another maybe ignition swith problem
« on: 01 September 2013, 04:46:31 pm »
havent seen this before but .......noticed the lights stayed on behind the clocks now when the key is taken out. If you then put the side lights on (no key in the ignition here) it activates the starter relay and dash warning lights, as well as putting the lights on, and you can push the starter button and crank the motor over. SoI pulled the block connecter (one of two) conected to the ignition switch under the tank which seems to disconnect the side lights and dash lights and the bike then behaves normally without the side lights/dash lights and rear lamp of course.
so....ignition switch or maybe the light switch ? or could it be a relay at fault ?
When the ignition switch is in the off position the system should be dead yes ?
I'll carry on the head scratching here but cant get my multimeter till the morning so any things to check letme know
cheers

5
For Sale & Wanted / FOR SALE:R1 forks, clamps, spindle, fork extenders........fazer1000 gen1
« on: 23 April 2013, 10:03:57 pm »
few bits here, set of R1 2003 forks in excellent condition pictured in a set of 4xv R1 yokes with a 5pw front spindle, Set of Devilsyam fork extenders used to raise the ride height when doing the R1 front fork mod to a gen1 thou



£50 for the fork extenders and £200 for the R1 front end, or can split the front end if your after just one part
cheers
Trev

6
For Sale & Wanted / FOR SALE: fazer1000 gen 1 Diggers Seat
« on: 23 April 2013, 09:51:58 pm »
Modded by Diggers seats. Mods to the seat are slightly lower and wider with the front built up slightly to stop you sliding into the tank. Just needs the std seat catch attaching to fit. Much more comfortable than the std seat. More padding to pillion section too.




£85 posted
cheers
Trev  :)

7
Fazer 1000/FZ1 corner / R1 front take3
« on: 13 December 2012, 12:47:13 pm »
ok...never one to hang around...heres the latest mod, cheap as chips from fleabay 08 4c8 forks with GP25 cartridge kit, few marks but fit in with the rest of my bike !!,  r1 wheel and 6pot calipers. Just need the temp to come up a couple of clicks to try them out ! The 08 forks are a bit longer than the 03's I had in so going to try them without the fork extenders to start with, see how it feels.



8
Fazer 1000/FZ1 corner / R1 front take2
« on: 29 November 2012, 03:42:26 pm »
Ok...so this is another r1 front end conversion, nothing new really  :rolleyes but thought i'd post up pics of the fz1 tope yoke mod supplied by devilsyam, fits str8 on with no issues and totally solves the problem of the front being too low. Forks/yoke and spindle from an 03 bike. I'll run with this for a bit unless an '07 on set of forks/calipers appears !






9
Fazer 1000/FZ1 corner / bar mounted mirror Q
« on: 17 November 2012, 08:24:58 pm »
going to put a set of bar mounted mirrors on and was wondering what others have done. The right hand looks simple enough using the mount already there, is that reverse thread in there ?
Left side was thinking one of these http://www.ebay.co.uk/itm/Bike-Universal-Motorcycle-Mirror-Mounting-Bracket-Suit-22mm-Bar-10mm-Thread-/310475330568?pt=UK_Motorcycle_Parts&hash=item4849c59408 which I assume will be normal/right hand thread.
Now then.....If I buy a set of yamaha mirrors will they both be left hand thread, both right hand or one of each ?  :'( :lol

any help welcome........ :)

10
For Sale & Wanted / set of givi pannier mounting rail wanted fzs1000
« on: 15 September 2012, 12:37:29 pm »
looking for a set of givi pannier rails if anyone has any for sale, already have a monokey rear rack. Would probably take the rails with the 21l panniers if anyone has them for sale.

cheers
Trev

11
Fazer 1000/FZ1 corner / R1 front end for sale
« on: 17 March 2012, 12:56:50 pm »
Going to sell my front end R1 conversion if anyone fancies a ready to bolt on conversion. I've only just built the thing and very happy with it too, however a lovely little cr250 has landed in me lap and I want to put some cash towards doing it up. The forks are 4xv, with 4xv bottom clamp, fazer stem,spacer from Justy, top clamp is cnc company (couple of small marks but near mint), fender is new off fleabay. Forks are in good condition, seals are good, few small marks, rebound adjusters are a little chewed by some hamfisted twiddler but work fine. Not bothered if it stays with me really, but could save someone a bit of time if they are thinking about doing the conversion.

£400 posted


12
General / CCTV
« on: 10 February 2012, 02:51:11 pm »
some scumbag helped himself to @200litres of diesel last night at my place , so ive been looking at some cctv setups like this http://www.ebay.co.uk/itm/1606549296...84.m1438.l2649. Anyone tried these type of systems.....are they any use ?
 I'm pretty sure its a local scumbag and being able to clock his vehicle on cctv would be all I need for a...erm...lets call it a confrontation....probably wont be back but yer never know.

cheers
Trev  :)

Pages: [1]