Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Bikebud on 16 April 2023, 11:54:35 am
-
Hi all, I'm about to change the oil on my FZ1 ABS 2012 (my first time changing the oil). The manual says I should replace the engine oil drain bolt gasket with a new one, but there is no part number and I can find it on Fowlers. Can I just use a crush washer? and what is the size?
Thanks,Bikebud.
-
Id be surprised if its not the same as this https://www.wemoto.com/bikes/yamaha/fz1_n/11/picture/sump_plug_-_drain_ally_washer (https://www.wemoto.com/bikes/yamaha/fz1_n/11/picture/sump_plug_-_drain_ally_washer)
-
Halfords or any motor factors will have them. 17mm as far as I can remember. Commmon enough size most Japanese cars are the same size washers. Aluminium or Copper
-
Thanks, I'll order a set of various size washers and see what fits.
-
I have te original part number if you are interested
-
https://yambits.co.uk/fz1sa-fazer-abs-oil-cleaner-drain-plug-washer-p-137521.html
Yambits have the bolts/washers etc pretty cheap (about to do the same to mine)
-
https://www.amazon.co.uk/AUTOHAUX-20pcs-Engine-Washers-Gaskets/dp/B07NYV226D/ref=sr_1_5?crid=1ECSL32PM1BAC&keywords=autohaux+20pcs+14mm&qid=1682879451&sprefix=autohaux+20pcs+14mm%2Caps%2C219&sr=8-5
I'm using these at the moment which
but in the past I've used this type
https://www.amazon.co.uk/Connect-Workshop-Consumables-36798-0-Crushable/dp/B00W9AOL72/ref=sr_1_9?crid=ZKZ70UJKZGOK&keywords=copper+crush+washer+20pcs+14mm&qid=1682879611&sprefix=copper+crush+washer+20pcs+14mm%2Caps%2C179&sr=8-9 (https://www.amazon.co.uk/Connect-Workshop-Consumables-36798-0-Crushable/dp/B00W9AOL72/ref=sr_1_9?crid=ZKZ70UJKZGOK&keywords=copper+crush+washer+20pcs+14mm&qid=1682879611&sprefix=copper+crush+washer+20pcs+14mm%2Caps%2C179&sr=8-9)