No worries - looks fantastic! Any queries let me know.


Just a heads up - will be temporarily suspending ordering from the website - mainly gives me time to get current orders sorted within promised times, and then I'm away in December, so I'll be switching the site to 'Pre order' mode for anyone who wants to order, I'll then be back in January and able to continue with additional orders.


However the next software update should be available before Christmas which will introduce additional Idle Fan control & Tyre Pressure monitoring, and will be compatible with the following TPMS from Amazon (actually meant for Car stereos, but it works nicely with the TFT Dash).


https://www.amazon.co.uk/gp/product/B07YBS1B6H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1


With the Christmas software update, and the above TPMS, all you do is connect the receiver to the USB port at the back of the TFT Dash - attach the LR & LF sensors in the kit to your wheels, and you'll have tyre pressure readings (+ warnings if your tyres go outside your set pressure range).

Danny


Was this change implemented now?


Thanks
Paul

just fitted the dash today. Great piece of kit. Very bright as well. Thanks a mill Danny

Great stuff! Just ordered mine today. Cant wait!

guys,


what's the part needed for this conversion?


Thanks
Paul

Hey Guys,


Looking for exup valve for Fazer 1000


Thanks
Paul

Are there any additional parts included with exup valve?
Thanks
Paul

are those sold now?

Unless you're a complete numpty, hard to see how you could have accurately measured but still over-filled the oil.

Is it possible you disturbed this hose you've mentioned with the spark plug wrench?  It doesn't make sense for a hose not to completely close a hole, as you described it.

Maybe a photo would help us understand better?

Exactly I was very meticulous with the amount I put in so I think I did it right- just assumed I overfilled since the oil was coming out.. All looks ok quantity wise (see first pic below)... The second picture is the hole where the oil is coming from I referred to before. There is this piping coming from the hole and there is a gap around the hose but that's ok I think. I sticked my finger inside this hole and oil mixed with water sits inside. It's not as dense as oil alone, maybe it's the water from undone clip coming inside and getting this kind of oil water mixture?? The hose is securely fastened there is no movement whatsoever. I had some issues removing spark plugs which is close by to the hose but don't think I messed up there since the hose is very secure. I forgot to tighten the little clip where the hoses are coming together overlapping each other. Maybe that's it? If this hose carries oil which I don't think it does the undone clip could have cause the oil there.


Also the first thing I replaced was air filter. When removing fuel tank is it possible that if I bent the fuel hoses and others coming from the tank in this area this could cause the leak?? I doubt it as those are two separate areas.

THanks a mill!




See the hole I referred to and the metal clip I forgot to tighten. When I put my fingers inside I can feel oil/water sitting there Could it be it?? 

great find!


I bought mine in May and similar story to yours - only 6k miles and I owner... I paid a premium as mine is 1 year younger and wanted black engine...


wear well


Paul

I am using fazer all year round! just got rid of bloody car so have to rely on my missus for car!


Paul

£85 to your door brand new never used with tags. With Yamaha adapter.

Why are you selling? How to do you find this attachment system? I have a magnet one but thinking about changing

Thanks
Paul

Hi Guys,


Fed up with magnet tank bag especially in wet and also due to scratches. Anybody using the attachable ones? What's out there fitting our bike?


Thanks
Paul