Date: 17-05-24  Time: 20:56 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - mike26

Pages: [1]
1
FZS600 Fazer / ridiculous screen
« on: 23 April 2012, 09:56:32 pm »
does anyone know if its possible to get a screen like this for a fzs 600 mk1 ?
http://i23.photobucket.com/albums/b371/sekrasta/New%20FZ6/DSC09175.jpg

2
FZS600 Fazer / trx 850 swingarm
« on: 09 April 2012, 06:55:57 pm »
hi, ok
i saw this on a few thread lower down,
just wondering does anyone know if it will actually fit ok,
im not bothered about the length being a few mm shorter to be honest, i would like to put one on my bike (due to paddock lugs) as i dont want to weld or drill/tap my stock swingarm mainly do to the fact i dont know how strong it would be e.g. could it actually take the bikes weight.


i already have the thou real caliper so im guessing if the swingarm fits without machining i would just need the torque arm and caliper bracket as well as swingarm obv from the trx 850?


im assuming shock linkages are the same??


anyone give me some more information into this or a general swingarm swap for fzs 600 (swingarm from another bike)

3
FZS600 Fazer / cleaning fazer shiney engine ?
« on: 26 March 2012, 10:58:08 pm »
right so i have seen alot of fazers with really glossy nice showroom looking engines, the question is how to you get them like that, shoe polish wax etc.
i can get mine looking good but some look like they have just been painted.
im really hoping these fazers arnt owned by sunday rider but are owned by commuters


so if anyone knows how or any other cleaning tips (getting brake calipers to a newish black not a greyish black)


thanks

4
FZS600 Fazer / Different rear wheel
« on: 16 March 2012, 12:20:51 am »
are there any different rear wheel that will fit the fzs 600? i mean rs 125 bandit 600 r6 ??etc etc etc


my bearing collapsed and is being a tw@ to get out


so im summing up my options if i can't find a decent fzs rear near by im going to try something new, im after a 17" wheel as my tire has at least 1500 miles left


otherwise is there any other wheel swing arms which will bolt straight on???


(id rather have something which i could fit the fzs sprocket to as i have just bought a new c&s set)


thanks mike

5
FZS600 Fazer / thundercat ignition advancer (factory pro?) in fzs 600 mk1 ?
« on: 08 March 2012, 11:34:54 pm »
if its been said im sorry,
but do thundercat ignition advancers fit straight on fzs no trouble?
if so shouldn't a k & n airfilter full exhaust system and ignition advancer sort the fazers midrange ?
anyway if anyone knows if it will fit then great can you let me know lmao i have a spare fzs engine practice on anyway
thanks
mike


6
FZS600 Fazer / speedo
« on: 14 December 2011, 03:37:13 pm »


will someone please help me
i need to know what wire from the fazer speedo is the positive supply and which is the negative supply
if anyone knows let me know asap please i have looked at wiring diagram but honestly haven't a clue :/
mike

7
FZS600 Fazer / how to make a hard clutch soft ?
« on: 29 November 2011, 08:53:48 pm »
right this may have already been answered but how can i make my clutch softer?
i have hard clutch spring in atm and need them to stay in.
i was considering buying a hydrolic clutch for a dirtbike off ebay and making it fit anyone tried this before? does it make it softer?
or does every fazer owner have a massive left hand (from using the clutch)

8
FZS600 Fazer / side panel fairing brackets
« on: 29 November 2011, 08:04:56 pm »
does anyone know where i get buy the brackets or does anyone have thm for the mk1 side fairings mine snapped off
can i buy them from somewhere?
does anyone have some on here they wont to sell?
or will i have to make my own ?
cheers mike

9
FZS600 Fazer / best air filter for fzs with...
« on: 25 November 2011, 09:47:04 am »
hi guys,
what do you think is the best airfilter for a fzs 600 with
quill exhaust
non-standard downpipes unsure on make
stock gearing
stock carb set up



basically i would like a little more power in mid range where the power drops
cheers mike

10
For Sale & Wanted / wanted good condition selector drum
« on: 04 November 2011, 04:49:03 pm »
wanted a good condition selector drum
thanks
mike

11
FZS600 Fazer / replaced the fork selector and checked its ok 3 time but still jumps out of 2nd
« on: 04 November 2011, 04:39:02 pm »
hi guys
this is really starting to annoy me now my bike has a new selector fork and still jumps out of 2nd gear all i cn think is my drum has gone to i havent tried replacing that yet thought what should the drum look like condition i mean ???
any help or advice appreciated
thanks mike

12
FZS600 Fazer / anyone have a haynes manual pdf???
« on: 22 October 2011, 06:00:29 pm »
if anyone has one for the fzs 600 it would be much appreciated
mike

13
FZS600 Fazer / 1000cc rear caliper
« on: 20 October 2011, 11:47:56 am »
right i my fzs 1000 rear caliper came yesterday, does anyone have any images of where the sanded the caliper bracket down ? and could they tell me how long/hard it was to do, to fit onto the fzs 600
thanks

14
FZS600 Fazer / will the thundercat selector fork/ drum fit the fzs 600?
« on: 18 October 2011, 11:52:34 am »
i have been having the problem with the bike jumping out of 2nd and found this on the old forum http://fazerowners.yuku.com/topic/31326/second-gear-jumping-out-engine-almost-out-any-advice?page=1
no one actually said if a thundercat drum/selector forks would fit a fzs 600, will it??? ??
i am attempting mine this weekend however i refuse to drop the engine out again so im doing it in the bike with the help of my dad and a few mates any tips to make it easier?

15
FZS600 Fazer / anyone thought of a feasible method of ram air for the fzs 600 ?
« on: 16 October 2011, 12:17:16 pm »
anyone thought of a feasible method of ram air for the fzs 600 ?
have they anyone successfully completed this ?

16
FZS600 Fazer / standard rear sprocket size?
« on: 16 October 2011, 11:22:20 am »
anyone know the standard rear sprocket size and if so anyone used more or less teeth on the rear if so hows performance effected.
btw i do alot of motorway miles and high speed riding/filtering
thanks
mike

17
FZS600 Fazer / headlight upgrade
« on: 07 October 2011, 07:27:37 am »
best cheapest headlight upgrade???

18
FZS600 Fazer / best screen
« on: 07 October 2011, 07:27:10 am »
whats the best screen for the fzs 600 1999 something sporty but something that works ?
thanks mike

19
Introduction / hi im mike
« on: 07 October 2011, 07:17:33 am »
hi im mike 18 have an fzs 600 and near wigan
below is my fazer and behind s my old red yzf now my brothers.


Pages: [1]