always use standard oem springs also if clutch is hard to pull...... one did you just do a clutch plate change if so.... did you take final drive cover off and..? if you didnt the clutch basket is not it properly and needs re-seating

hi this is a usual problem with fazers and is a gearbox repair most just fit new engines instead

yeh i know why germany... i cant afford 80 quid at moment

hi guys

the other day put a new disc on disc didint seam warpped but......
i have that feeling you get when the disc is warped that it juuders when braking ......... wheel spins and has a spot where is rubs and stops the wheel.....
also hear clicking sound from wheel/caliper
remove caliper and clicking goes away

wheel bearing seam fine no play but when i check the cush drive is really loose and needs replacement could this be the reason inclucing bearings that the clicking is happening or could it be a new disc thats warped and cush drives and bearings all at once??
any  help apreciated

clutch adjustment. rear brake bleed  new spark plugs  fairing repair  new handle bars
tomorrow clean chain and straighten front forks and wash lol

ah okay thank you i was worried that there would be a difference in oil displaced and wasnt sure if i had to work it out lol i am terrible at maths lol

hi guys looking to change fork springs for a new set question is............. if you measure fork oil and air gap before you put the spring in how are you supposed to know if it is correct because you wont know.......... obviously air gap is 121mm and fork oil is 475ml but is the spring is going to displace more or less oil how do you get the correct amount apart from buying originals from say folwers or such???

 is there a way to undo the top yoke nut with out taking off the handle bars seems that you always have to do this to straighten them is this the case

Hi guys

bought two fzs600 to restore one so got lots to sell
Set of forks from a 98
comes with new set of seals and 1lt fork oil and a few spare bushes that i had lying around


to rebuild yourself just done a rebuild and cant be ass'ed to do it twice lol

100 pounds thats including p+p i know i am taking a bit of a loss but dont mind need the space and the cash lol

will be posting loads so look out for anyhing you need or just ask if theres something you want......

Hi guys just wondering if there was a way to work out if the water pump is working my bike got a little hot today and i understand it was a hot day but it was only about 20 min ride out stop and wait for half hour then 20 mins again fans was on alot of the time.....

Hi guys wondering if any is local to Portsmouth I have seals bushes ect to rebuild my front forks any one got a fork seal tool who's local to Portsmouth that I can borrow over the weekend

okay just changed me front wheel and it feels a little tight... if you give it a spin rotates about two turns and stops is that okay or do you think it needs to spin more??

okay so today coming home i noticed a new sound.... it sounds like those old war movies of the planes flying over head loud rumble thats some kind of sypatheitc virbation sounds/feels like the tank makes the sound alot louder didnt have any change in responce or anything just a loud very distant vibrational rumble
any thoughts i am going to go over everthing tomorow any ways but suggestions would be great

it only happens at about 4k stable rpm in most gears and neutral no change in power timing (etc)