This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Fazer Forever
26
« on: 27 May 2015, 12:32:03 pm »
Just up the road from me. I know a few lads who buy from there and I generally go there for parts.
27
« on: 21 May 2015, 01:07:27 pm »
When I changed to a 1000 rear caliper and braided lines I locked the rear a couple of times, once quite scarily.
As a partial solution I adjusted the brake pedal to a lower position so it's still there if needed but would need a
good press to come on fully. Worked for me so far.
As others have said, roadcraft is the key, but there's always some t**t who will, do something totally unexpected,
usually right in front of you.
28
« on: 14 May 2015, 01:00:51 pm »
I've got Delkevic pipes and can, bought seperately. Had them a few years but don't remember the pipes in three pieces, and I certainly don't have the springs,
so maybe they've changed the design. No problems with fitting and are lasting well.
29
« on: 14 May 2015, 12:45:05 pm »
Gen 1 Thou with fairing lowers in Fiat Moto GP replica paint, in Leeds. Very nice!
30
« on: 04 May 2015, 08:36:27 am »
OK. I'll be there for 11 o'clock. See you there.
31
« on: 04 May 2015, 07:45:47 am »
I've got a few chores to do but could be ready for about 11. Meet at Squires or as it seems it's just us two you could come to call for me to play out. 
32
« on: 03 May 2015, 08:31:21 am »
Peeing it down here so rained off for today.
33
« on: 02 May 2015, 01:38:32 pm »
Changed fork oil and cleaned front brake pistons.
34
« on: 01 May 2015, 10:08:50 pm »
No probs. What time on Sunday and we can meet at Squires. See what the weather's doing and decide from there.
35
« on: 01 May 2015, 12:36:08 pm »
Sunday or Monday anyone? Coast, Dales, whatever?
36
« on: 08 April 2015, 12:58:48 pm »
As title, it's disappeared somewhere. The small, black, push on cap for the expansion tank. Anybody got one?
37
« on: 23 March 2015, 12:47:59 pm »
George McDonald Fraser - The Flashman Papers. Twelve books in total. Brilliant and informative if you read all the historical notes.
38
« on: 07 December 2014, 04:16:18 pm »
I've got Delcevic stainless downpipes and can, and a radiator. No problems with any of them, apart from the baffle fell out
of the can somewhere. Quality good in my opinion. At the time, it was that radiator or a genuine one, massive price difference
as you can imagine.
39
« on: 30 November 2014, 05:20:52 pm »
inflates the cheek pads?? Ha ha, yeah, that does read a bit weird. The helmet inflates around your face to give a snug fit. Like I say, not used that feature yet as it's a good fit anyway but as the helmet gets looser with age I might give it a pump or two. 
40
« on: 30 November 2014, 10:00:09 am »
I got a Scorpion helmet last year. Tried loads on but I must have a funny shaped head or something.
The Scorpion is super comfy but is a bit noisy. Comes with pinlock and has a drop down sun visor which I
honestly don't think I would buy another helmet without now. Also, has a kind of pump which inflates the
cheek pads for a better fit. Don't use it but will come in useful as the helmet gets older and looser.
41
« on: 16 November 2014, 11:44:35 am »
Crying with laughter. 
42
« on: 08 November 2014, 09:14:20 pm »
Tried to attach a picture of mine but didn't work for some reason. Had kind of a single seat with a storage compartment behind.
43
« on: 08 November 2014, 08:23:33 pm »
Missed the 250cc learner bikes due to age but had an RD250 with sidewinder on L plates bought from a mates brother.
44
« on: 08 November 2014, 08:18:22 pm »
Honda CB50 bought from a mate at work. 31mph on the flat on a good day, but had the speedo off the clock down a 1 in 4 hill one time. Sign of things to come, RD250 followed  .
45
« on: 15 October 2014, 12:45:45 pm »
Just watched it last night. Was there any part of the original plane re-used? Seemed to be a new build with the old plane used for reference.
Still enjoyed it though. I'm an engineer by trade and can appreciate that level of skill.
46
« on: 08 October 2014, 12:46:15 pm »
No probs, just give me a shout when you're ready.
47
« on: 05 October 2014, 05:15:38 pm »
If you're using it make sure you use the correct stuff. Once had a bottle of industrial Loctite 'High Strength Retainer' spill in my toolbox.
Glued some spanners to the base and had to get them off with a hammer and chisel!!!!
48
« on: 05 October 2014, 05:11:33 pm »
I've got some you can borrow, you know where I live! I'm busy the next couple of weekends though, then on holiday.
Could give you a hand after that though if you need it.
49
« on: 04 October 2014, 08:13:04 pm »
I'm going up there next weekend with 3 other guys from work. Staying in Keswick youth hostel. They know the walks better than me so I'm a bit at their mercy. I know we're doing Catbells on Sat, and the whole walk will be about 8 hours! I've been up Scafell Pike before though and done the Yorkshire 3 peaks, which I'd like to repeat one day.
50
« on: 23 September 2014, 12:42:08 pm »
Wasn't there one in one of the Die Hard films? The one with Samuel L Jackson in.
|
Show Posts
