When i bought the bike last year, it already had the heated grips fitted, haven't a clue what make they are but they have proved to be very handy the last few times i've been out on the bike in cold weather this winter.
But i digress... Last Sunday, i went for a spin to visit a couple of friends on Anglesey, some 20-odd miles away from where i live.
I used the heated grips on the way, got to matey's and stayed for a cuppa and a chat, as you do.
An hour later i came out to a flat battery, i had left the damn grips turned on, anyway it started easily enough with a bump start and off i went, so visit matey two, called at the petrol station about four miles away and the bike started on the button afterwards.
I noticed on the way to matey two's, that the left grip was loose, turning as freely as the twistgrip, so i assume that the heat build-up when they were left on for the hour i was visiting, had melted the glue that holds it to the bars?
Power for the grips come directly from the battery, so obviously they can be accidentally left on, as i did.
So, is there anywhere i can source a switchable power supply, such as the ignition circuit, so that this problem doesn't happen again?
When i got home, i took the battery off to charge it, i do have an optimate but the bike is outside under a cover, so it isn't convenient to charge it while it's on the bike, sod trailing wires out of the front window in this weather!
Anyway, as i said, i took the battery off the bike, which i found to be quite a wind-up, seeing as i couldn't get any grip on the beggar, so i resorted to threading a thin cable tie through each of the battery terminals and lifting it out that way, otherwise i would have had to have been a touch more inventive!
One of the cells has a slight bulge, as was made known to me when it was at the dyno mans last year, due he said, to the failure of the rec\reg unit, so i expect that the bulge didn't help with the removal of it.
Anyone else had a problem removing the battery?
G ; )