just won this what is the best way to try to get it clean again

[topgun44]

got a very good deal on it 
put it look like it need very deep clean any help 
http://www.ebay.co.uk/itm/140647310760?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[fazerboy1969]

Autosol.....labour of love,took me over 4hrs but well worth it

[Skippernick]

And fine wire wool with the autosol

[Captain Haddock]

scotchbrite is great stuff for jobs like that, use a fine grade and it will soon look better.

[topgun44]

thanks all look like i got hard rubbing to do 

[fazerboy1969]

Wire wool is for puffs! Use bare fingers,and be at one with ur pipes!

[Skippernick]

Wire wool is for puffs! Use bare fingers,and be at one with ur pipes!

but it does mean less cleaning and more riding

[topgun44]

http://www.facebook.com/media/set/?set=a.197288933687518.48871.100002192383298&type=1&l=ab6a54d37f
my hand hurts !

[Captain Haddock]

my hand hurts !

I couldn't get that aroused over shiny downpipes...

[topgun44]

my hand hurts !

I couldn't get that aroused over shiny downpipes...

I DID 

[Captain Haddock]

Wipe it off the downpipes before you fire the bike up, a bit of heat and it will stick like foc!

[topgun44]

hi all it me again    well i going to fit it in week or so it look like it will fit without a link pipe to my genuine silencer is that true or do i need a link pipe?
plus do i need a new seal for silencer to the headers (i have got set of seals for the pots)
thanks 

[Skippernick]

I believe you don't need a link pipe as its incorporated in the silencer on the original can thats why you need a link pipe with after market cans.
If i'm wrong no doubt i'll be abused and you will be notified of the right answer.

[Captain Haddock]

No link pipe required for that, Skippernick is spot on.

[topgun44]

thank you all    but do i need seal joint them together or i just clamp it 
 

[Captain Haddock]

You need a seal as the pipes are a different diameter, the seal is quite thick.