Fazer Owners Club - Unofficial

Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: fatbloke62 on 13 August 2023, 11:19:54 am

Title: Clutch
Post by: fatbloke62 on 13 August 2023, 11:19:54 am
Hi foccers not posted for a while but I need some advice if possible, I've noticed of late when the bike is idling the clutch is silent, pull in the lever and it starts rattling ,something I have never had before any ideas ,cheers
Title: Re: Clutch
Post by: Gaz66 on 08 September 2023, 09:33:11 pm
Hi..
Depends what u call a rattle, 1 mans rattle is another mans rumble.
If it concerns u, it needs stripping for a bit of inspection.


More than likely a wear issue, often the springs get weak in the clutch hub & rattle like crazy, this can affect most bike clutches, but could be the dreaded bung that detached from the shaft end, never seen it myself, but it does happen, I would have thought any foreign body rattling around in a clutch assembly would either lock the clutch up or stop it releasing.


Spanners out time. :thumbup
Title: Re: Clutch
Post by: Gnasher on 12 September 2023, 01:04:37 pm
If there is a noticeable rattle/rumble when the clutch is pulled, that would suggest basket bearing and/or worn basket.  Could also be push rod assembly wear.     
Title: Re: Clutch
Post by: b1k3rdude on 14 September 2023, 05:13:06 pm
or worn basket. 
This is a common point of wear, that depending on the amount of wear can only be resolved by replacing the clutch basket with a new or less worn one.