Date: 01-05-24  Time: 03:48 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - arch33angel

Pages: 1 2 [3] 4 5
51
FZS600 Fazer / Re: Datatool 3 Alarm Removal
« on: 24 November 2012, 10:57:35 am »
Yeah, foccin scary! Never had that due to alarm but have had front sprocket fall off a couple of times - once on motorway. I've had 4 Fazers all 2nd hand and 2 have had Datatool 3 already installed. Pure pain in the arse!

52
FZS600 Fazer / Re: Tyre time
« on: 23 November 2012, 06:03:24 pm »
021's are pretty good but the front wears out rapidly. Really happy with 023's having used a couple of pairs. I've never used Maxxis but they sound good at that price!

53
FZS600 Fazer / Re: Datatool 3 Alarm Removal
« on: 23 November 2012, 05:59:25 pm »
Cheers Griff. You would think these alarm manufacturers would be able to produce a system that lies dormant til it's needed.

54
FZS600 Fazer / Datatool 3 Alarm Removal
« on: 22 November 2012, 10:37:37 am »
Hi, I'm looking to take off the Datatool System 3 alarm as its eating my battery. Has anyone got any tips or wiring diagrams? New Yuasa shagged in less than a year because of this bloody thing. Thanks.

55
FZS600 Fazer / Solar Battery Chargers
« on: 05 November 2012, 03:24:20 pm »
Anyone got any experience of using one of these? Its not easy to connect to the mains where my Fazer is. Any type recommended or to steer clear of? Thanks.

56
Fazer 1000/FZ1 corner / Re: Lowering
« on: 07 October 2012, 04:04:36 pm »
Thanks for the info. I'll try one out for size and see how it goes. Cheers.

57
Fazer 1000/FZ1 corner / Lowering
« on: 07 October 2012, 10:21:12 am »
After 4 FZS600s I would like to go for the litre but as I'm only 5'7" seat height is gonna be a problem. Can anyone give any advice on the way to go re. lowering and does the handling suffer much? I'm not a knee-down rider but like a blast now and again. Thanks guys.

58
For Sale & Wanted / Re: For Sale 2003 Fazer 600
« on: 26 July 2012, 03:32:58 pm »
Hi, what's the mileage and what are the tyres like? (apart from being black and round :) ) Cheers

59
FZS600 Fazer / Re: Seat Height - Adjusting ?
« on: 20 May 2012, 12:18:54 pm »
That's a brilliant looking bike Fazerboy!

60
For Sale & Wanted / Re: FZS600 Scorpion End Can + Link Pipe
« on: 20 May 2012, 10:56:57 am »
Oh well EvilBayed.

61
For Sale & Wanted / Re: aftermarket can
« on: 20 May 2012, 10:51:38 am »
Got a feeling that's probably a no then.

62
For Sale & Wanted / Re: FZS600 Scorpion End Can + Link Pipe
« on: 18 May 2012, 07:21:26 pm »
Hi eiderrider,  have sent you a pm.

63
For Sale & Wanted / Re: Scorpion End Can + Link Pipe
« on: 17 May 2012, 07:10:35 pm »
Hi Dude, thanks for the cornering advice. I'm getting near the 50 year old mark so by the time I get the knee down it could be on a C90 step thru.  :D

64
For Sale & Wanted / Re: Scorpion End Can + Link Pipe
« on: 17 May 2012, 07:04:41 pm »
FZS600 From an 02-03. Probably fits 98-01 as well. It is stamped NOT FOR ROAD USE in small letters just below where exhaust fumes come out. Is there a name for that bit??

65
For Sale & Wanted / Re: Scorpion End Can + Link Pipe
« on: 17 May 2012, 01:55:36 pm »
Must get the sandpaper out  :D I'm more worried about hurting my bike low/high siding it than hurting myself.

66
For Sale & Wanted / Light Smoke Double Bubble 02-03
« on: 17 May 2012, 01:51:53 pm »
Good condition except for a few little scratches. I prefer standard screen. £10 can post at cost. Photo on its way.

67
For Sale & Wanted / Re: Scorpion End Can + Link Pipe
« on: 17 May 2012, 01:46:20 pm »
Yes, the rear is anyway. BT023 about 400 miles old. Unfortunately the tyres don't come with the can  :D

68
Stainless steel. Not for road use. Good sound but not excessively loud. Used but in good condition and has a few scratches but no dents. 

69
For Sale & Wanted / Re: aftermarket can
« on: 16 May 2012, 07:45:29 pm »
I've got a stainless steel Scorpion end can with link pipe but it's not road legal. Lovely sound but not too loud in good condition if you're interested?

70
FZS600 Fazer / Re: Low Rev Stuttering.
« on: 12 May 2012, 09:28:36 pm »
October. Only done about 1000 miles since. Never had this on 3 previous Fazers. This one has 26k on clock.

71
FZS600 Fazer / Low Rev Stuttering.
« on: 12 May 2012, 07:56:51 pm »
My Fazer hasnt seen much action the last few months and yesterday I went from Southend to Watford and back. When I got into Watford my bike started having problems getting away from lights and junctions. On the first three or four seconds it was stuttering and all of a sudden the power would just surge back and things were fine til I had to stop at lights or whatever and the same thing. I had to slip the clutch to make sure I didn't stall and then wham full power again. Was a bit worried on M25 on way back but the bike was fine. Seems to be ok again this morning. No problems getting away from standing start. Any ideas what happened and could it happen again? Thanks.

72
For Sale & Wanted / Re: Rukka Goretex Jacket New. £200 ono.
« on: 03 May 2012, 11:26:07 pm »
Sizes 50, 54 Sold.

73
For Sale & Wanted / Re: Rukka Goretex Jacket New. £200 ono.
« on: 30 April 2012, 12:29:16 pm »
Good afternoon. It's the Shakal model. Yeah, there's quite a few images when you google it and quite a few of them better than my photo!
Cheers, Dave.

74
For Sale & Wanted / Re: Rukka Goretex Jacket New. £200 ono.
« on: 29 April 2012, 08:05:02 pm »
I got them from a bike shop on the continent. Still have invoice. Not proving easy to sell on though even at around what I paid. They are genuine. Haven't got the missus a roll of material and a sewing machine.  :lol

75
For Sale & Wanted / Rukka Goretex Jacket New. £200 ono.
« on: 29 April 2012, 12:59:12 pm »
Brand new with tags. European sizes 48, 50, 54, 56. CE certified back, shoulder and elbow armour. Bear in mind fellow Foccers this is genuine Rukka not some Frank Thomas tat and its gonna p*ss down most of May!

Pages: 1 2 [3] 4 5