Date: 29-09-20  Time: 01:35 AM
06 January 2020, 10:29:11 PM by matt7chunk
Views: 1287 | Comments: 0

Hey guys ,

So, took the carbs off the Fazer yesterday for pre spring clean and while I had access I thought I would pull the cam chain tensioner to see if there's any steps left (ratt...
22 January 2019, 07:06:12 PM by tommyardin
Views: 2421 | Comments: 0

This is out there in case you are looking for a nice FZS 600 Fazer Foxeye later in the spring.

Not now but in April when the ...
18 February 2018, 08:46:40 PM by celticdog
Views: 5050 | Comments: 2

How to adapted from visordown website.
25 November 2017, 09:54:13 PM by pezos | Views: 3883 | Comments: 1

Hello again,

as a new FZS owner, I have decided to try the Wurth Dry chain lube. Trouble is there are no useful instructions on it as to when to replenish the application. Does anyone have ...
05 November 2017, 02:53:36 PM by Fazer1982 | Views: 3914 | Comments: 1

Hi folks I’m new to the site and I have a fazer 600 fox eye I have found out that the headlight are continental light and wondering if there is anyway of adjusting these to suit the uk roads or will I...
23 May 2017, 11:44:13 PM by tommyardin
Views: 5711 | Comments: 9

Now matter how hard I look, them fooking keys allude me .
Why is it when you lose something you go back and check exactly the same place a great number of times, I think I have almost worn the ba...
17 July 2016, 06:19:53 PM by alchemyx | Views: 4304 | Comments: 0


Trying to fix my carbs with following set (attached). Question is - where does smallest oring go? I have no idea and it seems impossible to find inside manual (too low resoluti...
14 July 2016, 09:21:28 PM by Sidewinder
Views: 4737 | Comments: 0

Hi all,
          Can I share a little story with you.
My son and I have both got FZS600 his girl is a 98 and mine a 99, he recently did an oil change on his with no problems and I needed ...
06 May 2016, 10:43:06 AM by Iceman | Views: 4833 | Comments: 2


Any chance someone could post a pic of the correct cable routing for the speedo pick-up please?


22 May 2015, 09:39:18 AM by coolhandluke
Views: 6050 | Comments: 3

Alright folks, Im wiring up a Koso speedometer and dont know how to wire it to the ignition as it doesnt have an on/off switch like heated grips for example so cannot be wired directly to the battery....
11 February 2015, 02:15:16 AM by fzsdaz | Views: 6714 | Comments: 5

Got a 00 fzs600,all good but upon viewing,rear brake was stiff from sitti up,it hadnt much bite in it and to get some pressure we pumpd the pedal.  BUT TODAY on my careful journey to the garage,i was ...
11 February 2015, 02:01:16 AM by fzsdaz | Views: 5603 | Comments: 2

Got a 00 fzs600,all good but upon viewing,rear brake was stiff from sitti up,it hadnt much bite in it and to get some pressure we pumpd the pedal.  BUT TODAY on my careful journey to the garage,i was ...
25 August 2014, 01:29:36 PM by TwoTinz | Views: 5834 | Comments: 3

Hi folks, noticed my fan never comes on, will try running 12v to it make sure its not the fan, but any idea where I'll find the temp sensors? I have a box eye model from '98 cheers
20 August 2014, 06:28:42 PM by wutangbuzz
Views: 5667 | Comments: 3

I've stuck a race can on my fazer which makes it sound much more fun but its made a big flat spot early in the revs. Anyone know what jets I can use to get rid of this?
08 August 2014, 10:30:23 AM by diggers rest | Views: 4988 | Comments: 0

 :rollin my fazey was firing on 3 and i panniced easy fix a tub of vasaleen put it in and on every electrical connector and eath point and this solved mine from missing  :lol  run like a dream
12 April 2014, 11:40:38 AM by acat002 | Views: 5519 | Comments: 1

Anyone tried a set of Pilot Powers? I'm having a set fitted this afternoon for £235 all in. Before I spend the cash I hoped I get the low down on them. US sites Revilla seems to rate th...
28 October 2013, 04:46:23 PM by dcurzon
Views: 7529 | Comments: 6

This is my generic guide rather than Fazer specific...
27 January 2013, 04:22:55 PM by stevierst
Views: 25264 | Comments: 59

Been looking for a luggage rack to carry my rather large kit bag to work. Couldn't find one big enough, so I knocked one up from bits of box section I had lying around.

Renntec run in fear...
20 July 2012, 08:40:47 AM by Lawrence | Views: 11740 | Comments: 13

Right, I'm due a rear tyre and am not sure what to get.  I do around 25k/year just commuting so I want something that's going to last a long time but not be stupidly expensive or hard as rock.  Any su...
28 June 2012, 09:05:43 PM by reggae123 | Views: 7762 | Comments: 1

does anyone no if a yamaha fazer 2003 will have the same size downpipes as a 1999 fazer 600 thanks ps looking at a new end can but the bike he used it 4 was a 2003 bike and mine is same bike but 1999 ...
John Silva
06 July 2011, 06:44:09 PM by John Silva
Views: 55506 | Comments: 39

Originally posted by Moffmeister on 31/03/01

For whatever reason the offside light on the Fazer only comes on when it’s on main beam (although it has a H4 dual filament bulb fitted). ...
John Silva
04 January 2011, 06:33:57 PM by John Silva
Views: 29448 | Comments: 18

Originally posted by slidesvill on 27/06/04

This seems to be getting a common problem, and I'd like some info off the foccers that have lost your front sprocket nut. I consider...
03 January 2011, 07:08:23 PM by Andrew
Views: 31010 | Comments: 19

Originally posted by pointer2null

The following instructions relate to a MK1 1998 Fazer, other models may be slightly different but the princip
John Silva
02 January 2011, 02:17:41 PM by John Silva
Views: 15201 | Comments: 3

Originally posted by kebab19 on 20/09/2008

Short Q&A

Q: What's this?

A: This is a front fork modification for Yamaha's FZS600 98-03. It improves th...
John Silva
30 December 2010, 04:05:22 PM by John Silva
Views: 21201 | Comments: 16

Originally posted by pointer2null on 07/06/2009

Firstly, this is a guide. I accept no responsibility for any mistakes or omissions. If you break it or injure yourself then that...
John Silva
29 December 2010, 09:47:02 PM by John Silva
Views: 9606 | Comments: 0

Originally posted by Nooj on 28/02/2009

If you want to fit LED indicators to your FZS600 Fazer, you can get them flashing at the correct rate by wiring a 21w resistor in parall...
John Silva
29 December 2010, 07:37:23 PM by John Silva
Views: 19099 | Comments: 1

Originally posted by Alistair

1998 Launch (evolved from the Euro / Japanese FZ400)
. Model number 5DM1 (see sticker on frame under the seat).
. Colours: red, b...
Pages: [1]