Date: 24-04-19  Time: 16:49 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - esetest

Pages: 1 ... 44 45 [46]
1126
General / Re: Tyre Time
« on: 24 April 2013, 09:09:22 PM »
I have  just replaced  the BT021 with the BT023 on the front , the difference is amazing, it's like riding a different bike .

1127
General / silverstone gp
« on: 29 March 2013, 10:41:42 PM »
I am planning  to go the Silverstone Moto GP this year for the first time  , I am looking at campsites  and have found a place called Intents GP  ,  has  anyone on the  forum used them , and would  recommend them .

1128
Fazer 1000/FZ1 corner / Re: TYRES
« on: 23 February 2013, 11:48:54 PM »
Thanks for the info and sarcasm , well I think that's what it is , roll on the spring.

1129
Fazer 1000/FZ1 corner / TYRES
« on: 23 February 2013, 05:31:48 PM »
WOULD IT BE OK TO REPLACE MY ILLEGAL FRONT TYRE WITH A BRIDGESTONE BT023 , THE REAR IS BT021 AND HAS ABOUT 2K LEFT , WAS GONNA REPLACE THEM BOTH , BUT SKINT AT THE MOMENT . CHEERS

1130
General / alternative to fowlers
« on: 30 January 2013, 11:41:51 PM »
If  anyone living in or near Bristol and is looking for a major service and can,t afford Fowlers prices  , i would recommend JHS racing at the end of Keysham bypass ( behind supermarket  )  £ 336 compared to £ 505   .

1131
General / Re: Periodic Driver Retests.
« on: 03 October 2012, 09:50:46 PM »
If  the government were concerned about saving lives they wouldn,t let old people die from the cold every winter , and start illegal wars , and the last thing our economy needs is more red tape and more costs  [size=78%]  [/size]

1132
General / Re: Any Sparkies? Lighting circuit question...
« on: 13 August 2012, 09:58:24 PM »
maximum current carrying capacity for a 1mm cable reference method c  is 13.5 amps , so depending on how many other lights are on the circuit  you should be ok with 1mm , as the work is in a kitchen which is a special location so is notifiable , before altering the circuit you also need to make sure the circuit is protected by an rcd with 30mA protection , and the equipotential earth  bonding to the gas & water pipes is at least 10mm , i would recommend jcc  fire rated downlights as the lamps aren,t exposed , and are less likely to be a hazard if combustible material is nearby .  if you are involving building control they will want to see a certificate .
if your kitchen burnt down , and your asked if you have had any electrical work done and cannot produce a certificate , the insurance company may not pay out or reduce the payment .

1133
Events, Meets, Ride outs etc / Re: Good roads in South Oxfordshire.
« on: 26 June 2012, 10:59:17 PM »
Try the  A40 to Burford then B4425 TO Bibury ( worth stopping here ) carry on the B4425 to cirencester then the A433 to Tetbury   , mainly  national speed limits between Burford & Tetbury  , great sweeping bends , a few twisties , watch out for hidden dips  no gatso,s between villages or  in  Tetbury , Bibury , none on the through road thru cirencester . Watch out for mobile cameras ( never seen one along here myself )

1134
General / joke
« on: 26 April 2012, 07:12:25 PM »
 A stunning lady walks up to the bar , she signals the barman to bring his face close to hers , running her fingers through his hair she says softly " are you the manager ?" "no" , he says. Can you give him a message ? she asks stroking his face & allowing 2 fingers to slip into his mouth so he can suck them gently & sliding them seductively across  his teeth & round his tongue . " Tell him there,s no fucking toilet paper .! 
 

1135
Fazer 1000/FZ1 corner / Re: 24k mile service
« on: 23 April 2012, 06:19:16 PM »
 Thanks to everyone for the advice , and sadlonelygit for the offer , but i will get some quotes for just the valve check , don,t fancy doing this myself as i struggled with replacing the spark plugs and  i don,t want to feck up the engine , at least i can relax about the mileage if they don,t go out of tolerance much

1136
Fazer 1000/FZ1 corner / 24k mile service
« on: 22 April 2012, 05:32:27 PM »
hi , my fzs 1000 fazer is due its 24k mile service in  june which includes valve check , which i don,t feel competent to do myself , the valve check  that is .  I got a quote for £ 505 from fowlers in bristol , does this price seem about right ,  seems a bit pricey to me , i just wanted to get other foccers opinions , before i got on the phone , cheers

1137
Fazer 1000/FZ1 corner / Re: coolant reservoir
« on: 23 March 2012, 11:05:32 PM »
Replaced my coolant last year as per the yamaha owners manual , nothing in there about removing the resevoir , it says after draining rad , put in coolant , fit radiator cap , start engine run for a few minutes to warm up, turn it off , recheck radiator if necessary top up , check resevoir level and top up , mines been no problem since

1138
Events, Meets, Ride outs etc / Re: Motorcycle Live 2011
« on: 24 November 2011, 02:08:49 PM »
HI FOCCERS ,
THINKING OF   GOING  TOMORROW , CAN YOU  PAY  ON  THE  DAY  , CHEERS   

1139
General / Re: Terrible news from sepang Moto GP
« on: 23 October 2011, 02:22:14 PM »
RIP Marco , you were a breath of fresh air in Moto GP , my condolences to friends & family

1140
General / The peoples pledge
« on: 22 October 2011, 06:46:17 PM »
Hi all ,  for any body interested check out the peoples pledge , an online petition calling for a eu referendem on getting out of europe . over 80000 signatures so far .

1141
Fazer 1000/FZ1 corner / Re: chain adjustment interval
« on: 11 October 2011, 03:09:39 PM »
Thanks for the heads up , i usually check it , clean it and lube it with silkolene chain lube monthly after  washing it , i keep the slack between 40 - 50mm , if i run it any looser i can hear it slapping , i wouldn,t say i was a kneedown hero , but i do like to get away to a quick start , always puts a grin on my face . 

1142
Fazer 1000/FZ1 corner / chain adjustment interval
« on: 10 October 2011, 10:22:29 PM »
what mileage do  other owners get between chain adjustments , i am averaging about  1900 miles , does this sound about right .

1143
Fazer 1000/FZ1 corner / Re: downpipe cleaning question
« on: 10 October 2011, 10:19:01 PM »
Hi Solorider ,
                  For the downpipes i used hot chrome metal restorer and hot chrome metal polish , i ordered it off the internet ,
it took about a month to turn up , but it was worth the wait , brilliant product  .

1144
Introduction / Re: Newbie
« on: 09 October 2011, 03:50:59 PM »
Hi theboydougie , username was the same but it could be changed  it to esetest

1145
Introduction / Re: Newbie
« on: 08 October 2011, 03:20:22 PM »
Hi theboydougie , cheers for replying , i finally managed to upload photo of my bike .

1146
Introduction / Newbie
« on: 07 October 2011, 10:10:47 PM »
Hi , im Paul , from Bristol  I have owned a FZS 1000 FAZER  in black since  February, still  loving . I will  upload  a  picture  once i work  out how to do it , it took  me  2  nights to  work  out how  to  log in to the new site .

Pages: 1 ... 44 45 [46]