Date: 24-03-18  Time: 16:01 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - GhostCat

Pages: [1] 2
For Sale & Wanted / WTB - End of April/May - FZ1-S
« on: 21 March 2018, 08:54:43 PM »
Hi Fockers
I will be looking for a FZ1-S after the end of April. Must have half fairing, and must be Gen2. Budget around £3k. Mileage no more than 15,000 and some history. Please send me a PRIVATE MESSAGE if you have something that fits the bill. I am in London but will travel anywhere within reason.


Motorcycles Matter!
Join our Awareness Ride in London
Saturday 21st April 2018
All motorcycle, scooter and moped riders are invited to come to London on 21st April to make the point that “Motorcycles Matter”.

Motorcycles play an important role in our congested cities.

The problem is that the people running things don’t get it.
Transport for London (TfL) and the Mayor of London refuse to acknowledge this.
It’s not just London: there are another 28 authorities around the country looking into Clean Air Zones (CAZ) and charging vehicles for entering them.
In London, it will cost £12.50 a day to pass the North and South Circular into central London.

Your Local Authority should be doing more to make it safe to park your bike by supplying more motorcycle parking bays with security.
Manufacturers should be doing more to build in better security.
Insurance companies should not be punishing the owners.
The government should be doing more to support the Police in their fight against theft and increasing the penalties so that owners are not financially punished due to increased premiums.
We are not a ‘cash cow’ to bolster failing finances due to government cutbacks.

So it’s time for motorcyclists to hit the road for a “Motorcycles Matter” awareness ride!

Keep an eye on social media for updates on this event.

Get passionate! Get involved!
Because Motorcycles Matter!

General / Re: London and the ULEZ
« on: 12 February 2018, 04:52:32 PM »
Yes Betty the 3rd runway would increase all traffic by 50% but corporations can profit from that ! And kerosene is still untaxed ! And unfortunately what passes for s consultation is more like a warning - they completely ignore all feedback and public opinion, all about the ££

General / London and the ULEZ
« on: 12 February 2018, 11:34:17 AM »
Just got this email from TFL.
In a nutshell, any bike registered before July 2007 will be liable to pay the ULEZ charge of £12.50 in the current Congestion zone next February (2019) and within the boundaries of the North & South Circular (proposed, by 2021)
Have a read to see what the mayor has up his sleeve
And if you can, complete the online survey and tell him where to poke it !
some background here

We are consulting on the next stage of the Mayor, Sadiq Khan’s plan to help tackle London’s toxic air pollution, which contributes to thousands of early deaths in our city each year.

To have your say visit

From 8 April 2019, the Mayor is introducing the Ultra Low Emission Zone in central London, replacing the T-Charge with an even tighter emission standards for diesel vehicles.
To help further reduce toxic emissions in London, the Mayor is also now proposing to:
    •   Extend these tighter emissions standards to the whole of London for lorries, buses and other heavy goods vehicles only in 2020
    •   Expand the ULEZ for all vehicles including cars, vans, motorbikes and minibuses up to the North and South circular roads in 2021
This consultation ends on 28 February 2018.

General / Re: Replacing an FZS600
« on: 06 February 2018, 11:42:24 PM »
Thanks chaps ! Both great bikes I wouldn't have otherwise considered ! The FZ6 doesn't seem to well liked by the reviewers tho  :lol  and is quite fugly (I know, pot calling the kettle black) the CBF though... cheap ! Same HP as the FZS and worse mpg, but a definite contender !

General / Replacing an FZS600
« on: 05 February 2018, 09:38:36 PM »

[size=78%]I've had my Fazer for a year - first big bike.. and absolutely love it. Comfortable, reliable, low maintenance, powerful, easy on petrol. But the London Mayor has proposed that, being a pre 2007 (not a Euro-3 bike) it will be subject to Congestion charge and ULEZ charge from next year. So I have been looking around to replace it, but I can't find anything post 2007 that is nearly as good ! MPG drops from 50's to 40's, and power drops even in an 800 like the Fazer 8. Also looking at the Honda CBF600S, the Fazer 8, Suzuki GSF1250SA, and the FZ1.[/size][/size] Anyone made the jump and fancy sharing their thoughts ?[size=78%]


FZS600 Fazer / Re: Cold starting
« on: 02 December 2017, 12:05:20 PM »
This morning I waited for the carbs to fill.. ran for 3 secs then stalled. Ignition off. Ignition on again, the pump ran for another 5-6 secs as if the carbs were empty.  Not sure if that's normal. I feel the battery is on it's way out but there's something else going on going to lift the tank up and see what's going on, but at the mo leaving and arriving home in the pitch black !

FZS600 Fazer / Re: Cold starting
« on: 01 December 2017, 12:27:54 PM »
Thanks I'll give that a go - always good to troubleshoot when you're not panicking that you'll end up late for work !

FZS600 Fazer / Cold starting
« on: 01 December 2017, 11:48:41 AM »
Hi my 2001 5DM Fazer is being a PITA on cold mornings.. starts for a second, then dies and won't start again until the battery is virtually flat. I can hear the pump clicking away. Maybe not giving it enough time to prime itself or something ? Once it goes it's fine.. normally starts on the button without choke - any pointers ?


FZS600 Fazer / Re: Engine rattle/rumble on 2000
« on: 03 September 2017, 08:04:14 PM »

borrowed my neighbours Carbtune and balanced the carbs yesterday, this was before:

idles better now (increased to 1250 rpm)

Still got a clonky noise though, not as smooth as mates !


FZS600 Fazer / Re: U-lock or Disc lock?
« on: 01 September 2017, 09:54:15 PM »
I got an Abus Granit 37/60 disk lock, doesn't fit in the holder but I just chuck it under the seat. *just* fits around the disk, making it hard to attack


FZS600 Fazer / Re: Engine rattle/rumble on 2000
« on: 03 August 2017, 01:38:18 PM »
Hi, I didn't do the rubbers, (bought bike in January)  but I just found out my neighbour has a carb tuner ! Yes the revs sit at 1100 ish, I will adjust


FZS600 Fazer / Engine rattle/rumble on 2000
« on: 03 August 2017, 01:18:47 PM »
Hi I met up with a friend who has the exact same bike as me and I was amazed at how much smoother and quieter his engine was, I don't know what to do to mine to make it sound so good. Mine "chugs" a bit on tickover and there is a rattle coming from below the camshaft. The thing is, mines only done 10,000 miles and his has done over 40k. I know my carb rubbers were replaced last year. Regular oil changes etc. Standard exhaust (he has aftermarket sports)
Sorry if this seems a dumb question, hoping someone has had the same problem.


Mates Fazer:

My Fazer :

FZS600 Fazer / Philips Xtreme Vision PLUS H4 Bulbs
« on: 13 July 2017, 09:24:57 AM »

just wanted to share my experience  - these bulbs lasted about 6 weeks (about 40 hours) each rather than the 450 hours they claimed ! Maybe a voltage or overheating problem ?


FZS600 Fazer / Re: 03 Yamaha FZS 600 Fazer Cafe Racer USD fork Swap
« on: 02 July 2017, 07:09:00 PM »
Hi Terje
Well Ive seen a few streetfighter type mods that frankly look terrible, trying to figure out why this one looks so damn good ? Could you post up a couple more pics of the front end ? And give us some details of the instruments & headlight please ?



FZS600 Fazer / Re: Header refurb questions
« on: 25 April 2017, 11:33:33 PM »

 Why? What happens if you spray over the old paint?
If you spray that primer on old paint, it dissolves and puckers up off the metal. Try it yourself on a small area. I would be inclined to just do your deoxidising and spray the PJ1 - its designed to be used without primer.
I hope I wont need the engine out any time soon... happy to live with it at the moment.


FZS600 Fazer / Re: Header refurb questions
« on: 25 April 2017, 06:54:54 PM »
A word of warning, if you are going to use that acid etch primer, it requires that every last scrap of black paint is removed, which is really an engine out job. Mine looks a bit like a dogs dinner now.  :'( all the other bits are done, water pipes, headers, snapped the bottom radiator bolt off trying to remove the rad, so back to the shop for drilling ! And waiting on the correct exhaust stud to arrive, they sent an M10 !


FZS600 Fazer / Re: Repainting the front of the engine.
« on: 17 April 2017, 08:41:35 PM »
Also could anyone say whether its advisable or necessary to prime the metal before painting, and do I need etch primer



FZS600 Fazer / Re: Boxeye headlight question ?
« on: 07 April 2017, 11:24:02 PM »
Heres the link,181.0.html
I have some spare flag connectors to connect up the dipped bulb in the right hand headlight  - but easier to just buy an H4 connector as per the last post in that thread


FZS600 Fazer / Re: Header refurb questions
« on: 06 April 2017, 07:03:30 PM »
My local mechanic got the stud out. He said "lots of heat". Cost me an hours labour.
Let the refurb begin !
Next question - is draining the coolant a pain as I need to refurb a couple of the coolant pipes


FZS600 Fazer / Re: Header refurb questions
« on: 29 March 2017, 04:53:34 PM »
Well the inevitable happened. After 6 days of religious and thorough plus gassing I took the plunge and snapped a stud on the second from left cylinder - the top stud. Its snapped off flush with the nut so praying that some purchase can be got on the stud. its an awkward spot but i got a socket spanner on it.  I stopped trying there ! hope you dont think i was ignoring your advice but i would rather sort it out now then when an mot is looming  i have alternative transport at least. booked into my local mechanics next week


For Sale & Wanted / WANTED: FZS600 98-02 Engine Bars (Crash Bars)
« on: 26 March 2017, 01:30:25 PM »
looking for crash bars for my FZS600 2000 model



Prefer monokey plate, will consider box too

but I'm mostly after the rack/plate


FZS600 / Re: Fazer Headlight Mod for mark 1 FZS600
« on: 24 March 2017, 07:07:08 PM »
having just done the mod with the help of these instruction hoping it cant hurt to add my 2p worth you can learn from my mistakes !

Johns original instructions refer to a Fastin-Faston 8mm right angle connector. Having spent a while searching for the right part I figured out there is actually no such thing which is why everyone had trouble finding them ! They are 7.8mm AMP Fastin Flag Terminals. But there are plenty of them on Ebay, just need to search for "H4 connector" I bought a Durite one which had the correct terminals in brass and the terminals in the correct orientation.

Also, to open up the old connector, you just need to push a flat screwdriver into the central hole between the 3 pins to push the flap open.

If you look at the terminals, you see the small tab which holds the connector in the block. If you want to use your new block you get the old ones out by inserting a thin strong object to push the spring tab back so you can withdraw it from the back.

Here is the power end that plugs straight in to the connector that has a green wire going in one side and no corresponding connection on the other side of the block, that is in the junction box under the fuel tank. It is a 2.8mm crimp terminal. I crimped it, then soldered it for good measure. No need to cut any of your existing connections. The fuse can be removed for MOT's if required. I searched on ebay for "2.8mm terminal latch" - the ones you need have the small locking tab poking out of the bottom to click them in place.

good luck and a big thanks to the original author John Silva.


FZS600 Fazer / Re: Header refurb questions
« on: 23 March 2017, 09:01:36 PM »
Thanks for the tips chaps, but the collector part is looking pretty ropy and I am looking to fit stainless headers when funds allow, so I need to sort out the nuts/studs anyway. Thing about the Yamaha nuts is, they are rusty as hell so they must be made out of recycled Austin Allegroes


Pages: [1] 2