Date: 12-12-18  Time: 14:36 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - celticdog

Pages: [1] 2 3 4
General / Mock theory tests
« on: 20 June 2018, 11:53:02 AM »
Have a try here if you've got a spare 10mins-

I got 43/50 on the 50 random questions link

FZS600 Fazer / New TPS
« on: 14 June 2018, 10:15:58 AM »
Hi If anyone is looking for a new TPS don't waste money on a second hand part. It's for a cheap bike but it's the same part as made by Mikuni of Japan!
part No (Mikuni A2) Hyosung No. 13580HP9301 it fits the Fazer   :)

General / Photobucket is back?
« on: 23 May 2018, 01:46:07 PM »

FZS600 Fazer / carb diaphragm screws
« on: 01 May 2018, 02:17:45 PM »
Hi Gents has anyone had any luck removing the black plastic vac chamber covers to access the diaphragms? Carb no 2 isn't sliding as well as I'd like, as usual they're the typical Yamaha cross-head screws made of cheese. 

General / Changes to the MOT
« on: 26 April 2018, 06:17:13 PM »
Apparently, from May there are new changes to the MOT?!? I'm not sure if it affects Motorcycles or not.
You will no longer be able to drive your car if it goes for the MOT before it is due and fails the test, In the past, as long as your car was roadworthy, you could keep driving it even after it failed, provided your old MOT was still valid. But now the second your car fails, it can be deemed 'dangerous', and that means a fine of up to £2,500 and 3 points on your licence.

So if your car fails the test and you have taken it to a test centre that does not do repairs what do you do? All MOT results are uploaded and stored, so any 'dangerous' faults go on the database straight away. So I would imagine there is every likelihood that you will be picked up by police cars having ANPR cameras on them if you drive it home, more money for the Government. :grumble

General / Crash Detectives
« on: 24 April 2018, 02:21:59 PM »

These guys are amazing in what they do, such a sad tragic tale this.
Well worth the read.

FZS600 Fazer / coolant
« on: 20 April 2018, 08:22:10 AM »
Hi Gents it's time to replace the coolant, does anyone have any recommendations?

The Laboratory ! / Want to know what Google "knows" about you!
« on: 18 April 2018, 09:00:37 AM »

History – Here is your entire Google search history.
Ads – Here is what Google thinks what your interests are and shows you ads based on these interests.
Location History – Here are the places where you used Google to do anything.
Takeout – Export every information Google knows about you.
Dashboard – An activity page that tells you about all the Google services you are using.
YouTube search history – YouTube saves all of your searches too.
Permissions – You can see here what permissions you gave to the extensions and sites you use.

Events, Meets, Ride outs etc / The Green Hut Cafe in May
« on: 15 April 2018, 08:29:18 AM »

Hi there, this is a shout out to any foccers in the Sheffield/Worksop/Nottingham areas who'd be up for a run out & meet at the Green Hut Bikers cafe-

A 616 Worksop Road, Ollerton NG22 9DR. If there's anybody interested, Sunday May 6th or 13th preferred. Here's to a dry spring :)

Cheers . . . Will

General / crash vid
« on: 11 April 2018, 09:22:39 PM »
! No longer available

FZS600 Fazer / Bargain basement
« on: 22 March 2018, 06:54:30 AM »

General / Using a phone while driving is OK now
« on: 13 March 2018, 04:47:20 PM »

It's ok to use a mobile phone but not spit
there are no winners here  :rollin :rollin :rollin

FZS600 Fazer / Centre stand spring
« on: 06 March 2018, 07:41:42 PM »
Hi, my centre stand spring has lost it's zing! Actually I think it's two springs? One inside the other maybe- has anyone any Ideas of the sizes I'm looking for or had any luck sourcing some new ones? Any ideas much appreciated. The stand works fine but it sort of floats between the fully raised up and half way down positions  :o

FZS600 / clutch replacement
« on: 18 February 2018, 08:46:40 PM »
How to adapted from visordown website.

The Laboratory ! / video test
« on: 24 December 2017, 03:51:46 PM »

General / Ba Humbug!
« on: 12 December 2017, 07:39:21 AM »
The most wonderful time of the year my arse! Please feel free to vent you anger on all things christmassy oh, and while we're on it, Xmas cards are completely pointless.

General / Yamaha 's R&D- concept bike
« on: 26 October 2017, 07:27:30 AM »

FZS600 Fazer / Petrol Cap woes
« on: 25 October 2017, 11:50:59 PM »
Well mines is getting more and more difficult to open every time I use it. Turning the key that last bit to pull back the bolt gets tighter and tighter, it feels as if I'm eventually going to break the key. Lubing helps for a bit but I think it's time to get a new one. Are the after market petrol caps any good? And more to the point are they easy to fit?

FZS600 Fazer / rear caliper refurb
« on: 18 October 2017, 07:44:55 PM »
Having replaced the rear disc, the rear caliper wouldn't go back on as one of the pots had seized solid so I've taken them off for a good fettle,one of the pots is completely focced.  :o  (clean and lube you brakes regularly)
Does anyone have any experience of aftermarket pots? Are they any good? Early fazer rear calipers are like hens teeth on ebay at the moment and I'm not willing to fork out £100+ for an equally rare thou caliper.
Any ideas?

Your Suggestions and How you can help / youtube no longer linking?
« on: 02 October 2017, 11:15:33 AM »
Hi it looks like the forum can't post youtube links anymore?
I'll try another site

The Laboratory ! / youtube test
« on: 02 October 2017, 11:14:25 AM »

FZS600 Fazer / rear oil seal
« on: 21 September 2017, 12:21:13 PM »
Hi gents does anyone happen to know the size of the rear wheel oils seal on the right hand side? (brake disc side)

FZS600 Fazer / Fork oils seals
« on: 07 September 2017, 11:23:13 AM »
Does anyone have any experience good or bad with vesrah products? I've fitted these oil seals as I didn't want to pay yamaha OE prices or get fleabay budget seals.
They don't actually sell seals for the FZS 600 but as the forks are a fairly standard size the AR-4101 are a match. So far so good.

FZS600 Fazer / tool for fork rebuild
« on: 23 August 2017, 12:40:34 PM »
Unfortunately I've got a leaking seal so it's time to do some maintenance the bank holiday weekend. To loosen the bottom bolt (M8)on the bottom of fork leg, requires holding the inside damper rod- the usual method is to use a broom handle.

Manual refers to Yam tools (90890) but no idea of what it looks like. From memory I think it's a hex. If I knew the size and shape I could weld something onto a long rod and reach down there.

Has anyone made similar or have any ideas with size and shape help?

Pages: [1] 2 3 4