Date: 17-12-18  Time: 18:45 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Dea-ville

Pages: [1] 2
General / Fazer 1000 to FZ6
« on: 05 July 2018, 07:57:30 PM »
Hi all, who on here has gone from a gen 1 thou to the FZ6? happy with the switch? reasons for & against. No plans to swap my thou any time soon as i'm still fettling & buying shite for it but every now & then i do like to swap for a 600.

Don't want to cause any friction but is there a specific model FZ6 that is considered the best one to get. Cheers, D.

Fazer 1000/FZ1 corner / Damper rod bolt
« on: 24 June 2018, 01:57:11 PM »
Hi all, planning to change the front springs soon on my gen 1 fazer thou, i know removal of the damper rod bolt is required when changing seals but is it required when changing the springs? Flicking through the Haynes manual it shows removal of spring & change of fork oil without touching the damper rod bolt.

Events, Meets, Ride outs etc / Squires
« on: 22 June 2018, 05:24:19 PM »
Nipping up to Squires tomorrow, if anyone is kicking around i should get there around 12 ish. Instantly recognisable by the pink carnation in my leathers left lapel, my brothel creeper bike boots & this months Escort readers wives special tucked under my arm. :D

Your Suggestions and How you can help / Little
« on: 21 June 2018, 05:08:21 PM »
Recently whenever i post a link to an external site it appears very small, it works but is minute.

For Sale & Wanted / Wanted : Gear indicator
« on: 10 June 2018, 01:32:27 PM »
Yes, i know i'm wasting my time writing this but if anyone is thinking of flogging their gen 1 Fazer 1000 & have a plug & play gear indicator they want to sell separately then give me a shout. D.

General / Paint
« on: 20 May 2018, 01:59:51 PM »
Anyone used this company before? i have used RS for many years but they aren't cheap, any info much appreciated. D.

For Sale & Wanted / Belly pan
« on: 28 March 2018, 06:50:03 PM »
Anyone flogging a good condition belly pan for a gen 1 thou? Colour not important. Cheers.

For Sale & Wanted / Rear shock top mount nut
« on: 30 January 2018, 04:05:08 PM »
Hi all, just fitted my beemer rear shock to my Fazer thou, no problems apart from the top mounting bolt was a fecker to get off due to the frame & a rounded off nut due to the previous owner swapping from standard to Ohlins then back again when he flogged it. 10mm thread size & plenty on ebay but anyone know the pitch size? Cheers

General / Where is she now 2
« on: 30 December 2017, 03:46:39 PM »
My first Fazer 1000 was back in 2007, red, 2002 reg YR02 VPL. Anyone on here got her? checked the gov website & still on the road with more than 40,000 on the clock, 20,000 more than when i sold her.

Fazer 1000/FZ1 corner / BMW rear shock preload
« on: 24 November 2017, 03:26:35 PM »
Hi all, managed to purchase a brand new BMW S1000RR rear shock for my gen 1 thou, had a new top bush machined rather than go with the spacers & set every thing midway as a starting point. My question is how much thread on the preload should be showing? again, as a starting point. Cheers.

For Sale & Wanted / Standard dog bones
« on: 01 July 2017, 09:37:21 AM »
Hi all, anyone got a pair of standard size dog bones kicking about for the gen 1 Fazer thou? Cheers.

For Sale & Wanted / Still for sale
« on: 24 May 2017, 10:16:32 PM »
Commented on this a couple of months ago & still for sale at same price.

For Sale & Wanted / Belly pan
« on: 21 May 2017, 05:30:54 PM »
Image result for fazer 1000 belly pan   Hi all, anyone got this type of belly pan for sale? not bothered what colour as i can spray it up. Cheers.

For Sale & Wanted / Wanted: Baglux.
« on: 22 April 2017, 10:16:52 AM »
Hi all, long shot but has anyone got a Baglux/Bagster tank cover for sale, ideally in grey? There are a couple on jizzbay at the moment but thought i'd ask all you Foccers first. Cheers. D.

For Sale & Wanted / Stainless rad guard
« on: 09 April 2017, 06:49:01 PM »
Hi all, anyone got a v nice stainless rad guard for a gen1 1000 up for grabs or anyone thinking of putting their bike up for sale & want to off load one before they flog it? Cheers.

Fazer 1000/FZ1 corner / center stand/after market end can
« on: 07 April 2017, 09:05:59 PM »
Hi all,  to those of you that have fitted after market end cans, which cans allow the center stand to be retained. Cheers.

For Sale & Wanted / WANTED.
« on: 10 March 2017, 01:53:55 PM »
Ayup chaps, still looking for a nice condition hugger, black or carbon effect. Cheers, D.

For Sale & Wanted / WANTED : Hugger
« on: 01 March 2017, 03:17:15 PM »
Hi all, looking for a good condition black or carbon fibre effect hugger for a gen 1 thou. Cheers.

For Sale & Wanted / Stainless rad guard
« on: 19 February 2017, 01:27:37 PM »
Ayup chaps, looking for a good condition stainless rad guard.

Fazer 1000/FZ1 corner / Got one
« on: 13 February 2017, 02:46:29 PM »
Got this on Saturday morning, just had a bit of time to wheel out for a quick pic. 2004, nice condition, loads of service history, 2 previous owners, looks bog standard but have a receipt for a change of fork oil & the forks dropped 5mm. I have the previous owners old V5C so i'm going to drop him a line to see if there are any less obvious mods that have been done.

Pages: [1] 2