Date: 26-08-19  Time: 03:48 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sinto

Pages: [1] 2 3 ... 87
1
Introduction / Re: Best end can for a 600 Fazer
« on: 21 May 2017, 02:06:37 PM »
Buy mines ;)

2
General / Re: It's come to an end :(
« on: 19 March 2017, 09:47:20 PM »
Holy FOC ----------------- do you live in it



:lol :lol :lol

3
General / Re: It's come to an end :(
« on: 19 March 2017, 09:46:48 PM »
all the best with the new bike colin. like maddog said hang around. ;) .      London that's a long way from you fair play to you.
Well, would've been a lot better run if that storm stayed away but it's done now and the fun begins :)

4
General / Re: It's come to an end :(
« on: 17 March 2017, 12:27:33 PM »
no need for you to leave mate, lots of us on here have moved on from a fazer (wish I hadn't!) but we're still here. Bought my last bike in similar circumstances to you, train from Liverpool to Lands End then rode home in every weather imaginable :lol

been thinking of a Pan myself, what reg/mileage is yours and what did you pay if you don't mind me asking?
Is it just the collecting box that still needs an eye out when buying?

Not going to leave, just be visiting now and again lol

Things I was told to look out for...
Collector box
Stainless exhausts
Stainless downpipes
Swing arm
Alternator
Radiator

The bike I picked up is on a T plate with only 46,500 miles but 11 previous owners which I didn't know till I got there, but on the plus side had the seat lowered for my short arse syndrome, also had two usb sockets and a cigarette lighter size socket in the left hand glove box. The lights are better than the fazer but only just, but being 2 H4's there's sufficient light but mines has been upgraded to orsam nightbreakers or similar as definitely better than standard.
The 450miles I done on it so far were very comfortable, and not stressing my carpal tunnel syndrome, so I'm really looking forward to trying it out on a good days run without the extra load and the wild winds I endured on it's maiden voyage lol

5
General / It's come to an end :(
« on: 16 March 2017, 08:42:48 PM »
Hello fellow foccers...
As you or may not be aware I've sold my fazer and now moving on to pastures new.
I'd like to thank you all very much for your help on my bike and a few personal issues I've shared with you over the last two years of ownership of my faithful steed.
But as said, time to move on and I've now bought a Pan European from a private seller a way down in London.
Getting it was a deal in itself, train journey down and ride the bike back, blown all over the road with the start of this storm that's just starting.
A big special thank you goes out to celticdog, who let me stay at his place on the way home to catch up on some sleep, sandwiches and coffee :) All very much appreciated and hope I can return the favour someday.
I'll keep in touch with the forum now and then as I've still got a few things lying around that may be of use to someone :)

Cheers guys,

Sinto

6
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 13 March 2017, 10:14:28 PM »
Bike now sold :) :( :) :(
Some parts still available though :)
Will update OP asap to show what I've still got.

7
For Sale & Wanted / Re: R6 shock conversion for fzs1000
« on: 09 March 2017, 10:48:19 AM »
If you get a mad rush on your shock mate, pass them onto me after you've sold yours, as I've got the same 1 I'm selling too ;-)

8
General / Re: Looking for sinto
« on: 09 March 2017, 09:07:39 AM »
Hello, I'm here, had to take a wee bit of time out for personal reasons, but hopefully that's it sorted.
Yes, my bike is still for sale in the for sale/wanted section along with a few spare parts. ;-)

9
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 08 March 2017, 10:10:40 AM »
Hi mate, do you still have available the radiator guard and one pair of levers?
Yes mate, still available, pm me if you want.

10
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 08 March 2017, 10:09:58 AM »
Still for sale or sold???
Bike still for sale
Parts amended on OP

11
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 26 February 2017, 01:02:21 PM »
Bump

12
For Sale & Wanted / Re: Wanted - FZS 600 downpipes/headers
« on: 23 February 2017, 08:52:01 PM »
I'm selling my stainless downpipes & silencer.
Plus my bike and various other parts 😁

http://foc-u.co.uk/index.php/topic,21817.0.html

13
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 21 February 2017, 07:09:46 PM »
What condition is the rear caliper in bud? In need of a rebuild or ready to use?
It's in good condition, used obviously, but still clean and good pads on it, I've still to take it off the bike, but it's the calliper and modified hanger for it, straight swap over to get a blue spot rear brake.
Mr self distruct
Got calliper off tonight, enclosed is a couple of pics for you.
Got it in a box, just to tape it up and get it to a post office for you.

14
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 20 February 2017, 09:13:50 AM »
Ok I'll have it bud, I'll pm a delivery address. Do you take PayPal?
Can do mate, I'll PM you in a bit 😁

15
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 19 February 2017, 08:42:01 PM »
What condition is the rear caliper in bud? In need of a rebuild or ready to use?
It's in good condition, used obviously, but still clean and good pads on it, I've still to take it off the bike, but it's the caliper and modfied hanger for it, straight swap over to get a blue spot rear brake.

16
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 19 February 2017, 08:39:29 PM »
You got pics of the shock yet Colin?
Yes, see below

17
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 19 February 2017, 10:17:05 AM »
Hi Colin, have you got a pic of the radiator cover please?  First dibs on that if I may.
Someone has pm'd me first but your next in line Harry if they don't want it :)

Pm'd you Harry

18
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 12 February 2017, 01:51:54 PM »
Hi Colin, have you got a pic of the radiator cover please?  First dibs on that if I may.
Someone has pm'd me first but your next in line Harry if they don't want it :)

19
For Sale & Wanted / Re: FZS 600 1998 and parts
« on: 12 February 2017, 01:50:47 PM »
Hi Colin, does the R6 Shock come with dogbones and everything required to fit a 600?
Straight fit using original nuts & bolts, I got dogbones made especially for my riding, will get measurements and a picture of them posted up.

20
For Sale & Wanted / FZS 600 1998 and parts
« on: 10 February 2017, 07:16:05 PM »
Hello all,
I'm selling my 600 from 1998 on a R plate, looking for £950

Red (the fastest colour) ;)
Standard bike
33,088 miles
Recent front & rear sprocket & chain
Recent front fork seals and 15w oil
Recently had valve shims and gaps checked by a local garage (receipt available) and all is well
12 months MOT
New rear tyre
Plenty of life in front tyre
Rear hugger/chain guard
Front fender extender
Brand new still in packaging front & rear set of pads
Tools
Haynes workshop manual
Loads of previous MOT's & paperwork


This is a good honest bike with plenty of history although I've done all the servicing myself since I've owned it over the last two years, the only reason I'm selling it is that I have carpal tunnel syndrome on both wrists and will need to wait a long while to get them fixed, so no point it sitting there and I've also got my head set on changing it to go for a Pan European.

Based in Glasgow

I've also got some extras for sale.....
R6 rear shock.....£150
Black Widow Stainless steel downpipes....£150 (rrp £270?)
Max Torque Cans end can, oval, carbon, street legal and removable baffle......£150
WILL DO CAN AND DOWNPIPES TOGETHER FOR £280 (plus p&p)
Hyperpro front fork springs (with spacers)....£30 SOLD
Fazer 1000 rear brake caliper and modified hanger.....£80SOLD
Stainless radiator guard....£25 SOLD
Clutch & Brake lever foldable and adjustable levers (red/black)...£5
(All plus postage at cost)

Any questions, feel free to ask :-)

Photo's to follow

21
For Sale & Wanted / Re: FZS600 1998 R plate Glasgow
« on: 24 December 2016, 05:56:31 PM »
Hi Pandy, back to original screen, aftermarket ones I've had are now sold, sorry fella.

Hi!

Aha, but the one in your photos, what screen is it? Do you remember? So i can have a starting point in looking after.

Happy holidays!
Pandy, it was a MRA touring screen, a few come up on various auction sites now and again for less money than the retail price of about £130 delivered  ;)

22
For Sale & Wanted / Re: FZS600 1998 R plate Glasgow
« on: 23 December 2016, 09:35:14 PM »
Hi mate,

What screen do you got on? Are you selling it?

Thanks!
Hi Pandy, back to original screen, aftermarket ones I've had are now sold, sorry fella.

23
For Sale & Wanted / Re: FZS600 1998 R plate Glasgow
« on: 23 December 2016, 08:05:36 PM »
how much you looking for it does it come with the corrected dog bones ?

Make me an offer???? (PM if you want)
It's got proper engineered bones made for it/me can't remember the exact size and they are still on the bike, due to take them off on Monday and I can post pics for you.

24
For Sale & Wanted / Re: FZS600 1998 R plate Glasgow
« on: 23 December 2016, 06:23:18 PM »
did you sell the rear shock ?
Not yet :-)

25
For Sale & Wanted / Re: FZS600 1998 R plate Glasgow
« on: 23 December 2016, 03:04:14 PM »
don't sell it, sorn it and cover it, wont cost nowt
Ha ha, it's not the cost, it's the point of it sitting there and of no use to me, I'll end up changing it come the time I'm sorted with my carpal tunnel syndrome so just selling it rather than it sitting there :(

Pages: [1] 2 3 ... 87