Date: 28-03-24  Time: 14:22 pm

Author Topic: tail tidy  (Read 4159 times)

KENT62

  • Cager in Training
  • Posts: 20
    • Main bike:
      Fazer8
    • View Profile
tail tidy
« on: 12 March 2017, 01:17:49 pm »
Has anyone fitted an R&G tail tidy, that you can use the original indicators with?  Are they simple to fit?

Laziness leads to efficiency!

Trickie

  • Cager in Training
  • Posts: 9
    • Main bike:
      FZ8 11-
    • View Profile
Re: tail tidy
« Reply #1 on: 17 March 2017, 04:00:28 pm »
Fitting is straightforward unless you have a givi top box rack (Like Me!) Then you have to bend the attaching plate a bit so indicators don't clash with rack.

KENT62

  • Cager in Training
  • Posts: 20
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #2 on: 17 March 2017, 05:00:54 pm »
Tricky, thanks for that.  I have a Yamaha rack so I'll see how it goes.



Laziness leads to efficiency!

KENT62

  • Cager in Training
  • Posts: 20
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #3 on: 21 March 2017, 08:35:24 am »
If anyone decides to get one it would be worth a message on fitting.  Took me 3 hours but I'm not the best mechanic in the world!  I had to take off a lot more bits than expected.
Laziness leads to efficiency!

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #4 on: 15 November 2019, 04:18:08 pm »
Ive got one on order so will let you know.
Over Land and Sea

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #5 on: 19 November 2019, 02:25:22 pm »






The bike allready had one fitted . :)


Over Land and Sea

celticbiker

  • Club Racer
  • ****
  • Posts: 441
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #6 on: 21 November 2019, 10:54:00 pm »
First thing I did was put the rear end back to standard. Don't like the look of the tail tidy.
(\__/) This is bunny. Copy and paste
(x'.'x) bunny onto your page to help
(")-(") him gain world domination!

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #7 on: 22 November 2019, 07:46:30 am »
I didnt get the standard rear with mine but may buy one and try it .
Over Land and Sea

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #8 on: 22 November 2019, 08:25:20 am »
Ive just won a complete original rear end on Ebay . :)
Over Land and Sea

celticbiker

  • Club Racer
  • ****
  • Posts: 441
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #9 on: 22 November 2019, 05:56:58 pm »
Picked up a brand new one on the Bay for 20 quid.
Might want to get a couple of huggers in too when you see them cheap. I've had one break every year but I do cover a lot of miles,  around 500/week.
(\__/) This is bunny. Copy and paste
(x'.'x) bunny onto your page to help
(")-(") him gain world domination!

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #10 on: 26 November 2019, 09:52:04 am »
I removed the R and G tail tidy last night .The longest part is the wiring .I took of the four bolts holding the tail tidy from under rear seat ,the rear seat surround bodywork (clips and bolts) ,both grab handles (2 bolts each),
the rear under tray(8 trim clips ) .I also removed the steel bridge at the front of the rear seat from the sub frame (4 small Bolts ) to make access to ther light and indicator bullet conecters easier.
Then disconected the indicators,number plate light and tail light .








« Last Edit: 26 November 2019, 04:23:28 pm by Stormbringer »
Over Land and Sea

celticbiker

  • Club Racer
  • ****
  • Posts: 441
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #11 on: 26 November 2019, 09:34:14 pm »
What do you think, better or worse?
(\__/) This is bunny. Copy and paste
(x'.'x) bunny onto your page to help
(")-(") him gain world domination!

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #12 on: 26 November 2019, 09:41:22 pm »
Better but I may fit some LED indicators .
Over Land and Sea

celticbiker

  • Club Racer
  • ****
  • Posts: 441
    • Main bike:
      Fazer8
    • View Profile
Re: tail tidy
« Reply #13 on: 26 November 2019, 09:43:34 pm »
I'm gonna fit the led headlight bulbs back in when I get chance.
(\__/) This is bunny. Copy and paste
(x'.'x) bunny onto your page to help
(")-(") him gain world domination!

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #14 on: 26 November 2019, 09:48:53 pm »
Yes on my list as well .
Also been trying to find a r
LED rear light unit without indicators .
Over Land and Sea

Stormbringer

  • Weekend Warrior
  • ***
  • Posts: 106
    • Main bike:
      Fazer8
    • - Main bike
    • View Profile
Re: tail tidy
« Reply #15 on: 27 November 2019, 10:06:50 am »
Ive just bought  a new 2006 R6 rear plate holder(ebay £20 delivered) and  have got the LED indicators .Just waiting for the adaptor plates for the indicators to arrive.
Over Land and Sea