This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - clayt74
26
« on: 20 May 2016, 03:18:00 pm »
I suppose I'd go for option b, interestingly I don't nod to scooter boys only fellow bikers. Anyone else still a nodder?
I'm a nodder, will give any old biker the nod me I ain't fussy.
I would stop and help personally, failing that option b.
I'm a nodder too, even to some of the scooter boys if they still have their baffles in,are wearing proper gear and riding sensibly! I even nodded at a police bike the other day...........not sure what the etiquette on that is? He didn't nod back. I would have stopped to help. At the end of the day his mates would eventually notice or at least could be sent a text to inform them Not likely to be a major mechanical failure,but kids these days haven't a clue how anything works unless it's connected to WiFi
27
« on: 25 April 2016, 05:37:56 pm »
O.K. a reply. If you like it keep it, if you don't like it bin it. For myself I want a mudguard to protect the engine and radiator from all the road spray and crap. But this is "your" bike and that mudguard does look good, so maybe you should keep it. Either way it's interesting to see what you are doing with the bike.
I agree!! However if it's opinions you want, I'm struggling to see what you are trying to achieve with it? Aesthetics or functionality? Personally I prefer fazersharp slimmed down version. But ultimately I'm perfectly happy with the standard so it it was me I would probably bin it. Only my opinion tho!!!
28
« on: 20 April 2016, 05:45:46 pm »
It'd only bad for your health if the misses catches you!!!!!!
I wanted to take an idea to dragons den for a foam attachment for laptop screen n base that would prevent smashing ya cock between them when you suddenly shut the lid to close a porn site!!!! Lol
29
« on: 01 April 2016, 03:27:06 pm »
How can it be hooked in the wrong direction, it's the front sprocket that pulls the chain, rather than the chain pulling the sprocket?
It looks to me like the hook tips are pointing forward, the normal wear pattern for a front sprocket.
Really? Well I've learned something new today, although I've not really put too much thought into it before to be honest. I just see hooks and presume it's fooked.
Correct that the front sprocket is pulling the chain,the sprocket rotates in an anticlockwise direction to drive the bike forwards, therfore wear on the sprocket will be on the right hand side of each U or trough of the sprocket......so if the hooking is on the right hand side of the U....... as per pic and hooks are pointing towards direction of travel (anticlockwise) as per pic.......then that sprocket is knackered and a new set n chain is definitely needed!!!!
30
« on: 10 March 2016, 07:46:50 pm »
DFS was doing a sale on one of those with 2 reclining arm chairs for £899 😆
31
« on: 05 March 2016, 10:38:47 am »
Thanks for the advice, plenty of brake cleaner it is then. Cheers
32
« on: 04 March 2016, 04:02:19 pm »
Hi all, this probably sounds a silly question. I ride my fazer all year round and this year has taken its toll on the bike. My calipers are functional but filthy beyond words!!!! I have never used brake cleaner before, is it safe to use all over the calipers, disks and pads??? Are there any areas I should avoid? Assuming paint work? Is it safe for pots and seals?? Many thanks for any replies
33
« on: 25 November 2015, 09:48:37 pm »
cheers all just got to stay positive, clayt get yourself to the doctors, see if he can find sky 1,
Will do........bollocks to sky one I want the fight at the weekend!!!!
34
« on: 25 November 2015, 07:51:58 pm »
I'm 41, a bit over weight and drink more than I should. Also had a crazy itchy arse for a couple of weeks now
"thats where the remote went"
LOL maybe that's it............I just thought it was the missus channel hopping everytime I sit down !
35
« on: 25 November 2015, 06:28:10 pm »
Wishing you all the best for a speedy recovery! Well done for sharing and raising the profile of such things. I'm 41, a bit over weight and drink more than I should. Also had a crazy itchy arse for a couple of weeks now, so I'm making a dr appointment asap
36
« on: 16 November 2015, 07:59:01 pm »
I haven't had time to check the specs of the video card, but it sounds like the card is only 32bit hence only able to share 4 of the 8 GB system memory?
37
« on: 29 September 2015, 04:50:58 pm »
The new master sockets usually have 2 IDC blocks. 1 for the BT line coming in and the 2nd to terminate an extension. I would completely remove the old cable, cut and strip back the new extension cable (so you know you have good undisturbed copper) and punch it down using a proper tool. Its the only way to ensure good bandwidth
38
« on: 23 September 2015, 02:12:40 pm »
I tend to use the loose fist wave (5 finger shuffle) purely cos with my gloves on it is more prominent than a 1 finger salute.
39
« on: 05 September 2015, 03:18:03 pm »
Agreed, it's gotta be yours YamFazFan. Looking forward to the next challenge!
40
« on: 29 August 2015, 05:02:02 pm »
Looks fine to me, even better that they're all the same.
As above........ Looks perfect to me!!! As I like my women, nicely coloured with a good gap
41
« on: 26 August 2015, 12:34:30 pm »
42
« on: 21 August 2015, 09:48:13 am »
surely its front and rear tyre pressures for when riding in snow
43
« on: 18 August 2015, 05:18:41 pm »
Lol, just make sure you adjust the brake light switch at the same time!!
44
« on: 14 August 2015, 10:02:30 pm »
So don't have the bike here to check, why won't a deep socket and normal ratchet work??
45
« on: 14 August 2015, 08:59:42 pm »
Thanks Darrsi that's an excellent tip that I wouldn't have done. Cheers mate
46
« on: 14 August 2015, 06:26:22 pm »
Well you got a bonus 3 months out of it anyway.
http://foc-u.co.uk/index.php/topic,17047.msg196603.html#msg196603
Lol well spotted!! I should have taken then as a warning sign, however it did lube up ok and felt a lot better. Looks like I won't receive the new cable until Mon poss Tues anyway. Thanks for all the replies sounds like it something I can do in a lunch hour.
47
« on: 14 August 2015, 03:59:49 pm »
Just leaving work, first junction clutch cable snaps at lever. Managed to ride bike back into work (not prepared to try the 15 miles to get home) if I can get a cable tomorrow how hard/how many tools are needed to replace the cable (isolated car park with no access to any nearby tool or consumable store) Basically can I do it in an hour with a normal portable general tool kit on a Saturday in the passing rain? Cheers
48
« on: 13 August 2015, 12:21:02 pm »
Are you sure you have standard gearing on the sprockets!! Sounds to me like you are expecting too much from the bike? Mine is standard and in 3rd (on a private road) I just top 100mph at 13krpm (just into the red) and I wouldn't wanna push it beyond that plus you are way beyond the max torque point so pretty pointless?? If you had different gearing it would explain your higher speeds but would also explain the additional loading that would cause your overheating problem?
49
« on: 11 August 2015, 07:26:11 pm »
I can see how it can happen...... The centre stand is designed as a lever, so that the working force should be from the leg into the stand and the arms only guide the bike up.. . . . . If you do not exert enough force on the stand and try to pull the bike up with your arms, then it becomes unstable and the arm with furthest reach will cause more leverage and likely result in the bike pulling away from you!
50
« on: 11 August 2015, 09:46:37 am »
You will also need a M10 bolt(iirc) to mount to the mirror mount on the bars. I think I had a M10x25
|