Date: 26-04-24  Time: 23:49 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - fazersharp

Pages: 1 ... 187 188 [189] 190 191 ... 277
4701
General / Re: Directional indicator location
« on: 14 September 2015, 09:43:34 pm »
If you dont like indicators then dont heave them as as far as I know you dont have to have them -- but if you do then they have to be to regs and work

4702
FZS600 Fazer / Re: another bolt focc-up ideas?
« on: 12 September 2015, 03:37:10 pm »
Its a boxeye
But it was just a private seller who was selling parts and so I don't know where you would get a new one

4703
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 12 September 2015, 03:23:03 pm »
A river lock or a canal lock or the actual river Lock (dosn't exist)dose it ?

4704
FZS600 Fazer / Re: Rear Axle
« on: 12 September 2015, 03:19:12 pm »
Quote from: Val on 12 September 2015, 02:20:24 pm
Quote from: fazersharp on 12 September 2015, 01:53:43 pm
Had a closer look at my washers and noticed one side has a letter "N" stamped into it and the other side has a "O" stamped into it --- whats that then ?

Is it possible to mean Nearside and Offside, but than the markins should be swapped on the opposite sides for each spacer and also we'll need to know which is left and right??  :eek
The washers are indeed fitted N= on the nearside and O on the ofside
Both measure 44mm diameter I have tried to measure the thickness in situ with the vernier caliper depth gauge but keep getting a different reading every time but I think the nearside (nut and thread side  ) is 3mm but the offside fixed nut seems to be MAYBE 2.75mm but what would be the point of that - why not both 3mm. My measuring could be wrong.
 And if both are 44 mm then why have a near and offside preference.
 

4705
FZS600 Fazer / Re: Rear Axle
« on: 12 September 2015, 01:53:43 pm »
Had a closer look at my washers and noticed one side has a letter "N" stamped into it and the other side has a "O" stamped into it --- whats that then ?

4706
General / Re: what did you do with your fazer today ?
« on: 12 September 2015, 12:07:15 pm »
So we are talking. Relativistic Doppler effect

4707
General / Re: Today's "What Gets My Goat"
« on: 12 September 2015, 11:22:34 am »
Quote from: darrsi on 12 September 2015, 11:14:32 am
Quote from: fazersharp on 12 September 2015, 10:59:13 am
Idiots in cars driving like a loon just to try and prove something by keeping up with me on twisty country roads putting me in danger as they push too hard.
You know what I do -------- pull over, let them past and hang back and let them be a twat way off in front of me out of my way.


Do you hear loud sireny noises, and see blue flashing lights perchance?  :stop   :rollin :rollin :rollin

That is another reason to let them past as I cannot clearly see who is driving I am always suspicious why someone is interested in keeping up with me

4708
General / Re: Today's "What Gets My Goat"
« on: 12 September 2015, 10:59:13 am »
Idiots in cars driving like a loon just to try and prove something by keeping up with me on twisty country roads putting me in danger as they push too hard.
You know what I do -------- pull over, let them past and hang back and let them be a twat way off in front of me out of my way.

4709
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 12 September 2015, 10:54:35 am »
BITTER !!!
I havent stopped crying

4710
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 12 September 2015, 10:34:10 am »
Can we let him have it as it is a stupid challenge.
(im still crying from having the last challenge stolen from me )

4711
FZS600 Fazer / Re: another bolt focc-up ideas?
« on: 12 September 2015, 10:20:24 am »
Under your new one it looks like there is already a mesh or is that part of the new one.

I got this one off ebay and fully expected to have a faf fitting it as everyone seems to, it like different year rads are different sizes but all covers are one size.
Any who it was a perfect fit, I dont much care for the ones that say fazer as I think it looks a bit teenage boy racer  :evil :pokefun

But on the other hand ----- BBQ anyone !
 

4712
General / Re: what did you do with your fazer today ?
« on: 12 September 2015, 10:05:01 am »
Quote
did I hear right that red is the fastest? :lol


Noooooooooo you got it wrong its black.
That bit at the back where you started -------------- now do the rest the same

4713
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 11 September 2015, 11:36:20 am »
I wish I never fecking asked  :fish

4714
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 11 September 2015, 10:03:09 am »
Being scored or goal post only

4715
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 11 September 2015, 09:16:33 am »
i snoozed--- i loozed.
looks good to me

4716
General / Re: 2015 FOC-U Bike Picture Challenge
« on: 10 September 2015, 09:19:44 pm »
Not for me im afraid as that is not a statue of a woman -- it is a Frese of a child and woman. The challenge was a statue of a woman for which I have got nailed tomorrow.

4717
General / Re: Today's "What Gets My Goat"
« on: 10 September 2015, 09:12:52 pm »
People who say "can I stop you there" --------------------- no you fecking can not.

4718
FZS600 Fazer / Re: Rear Axle
« on: 10 September 2015, 09:06:44 pm »
So now I dont get how it can get dished when there is a solid adjuster behind it, there has to be a little gap so to insert the adjuster but surly not so much that you can crush the swing arm.
Could you hammer in the adjuster with a shim piece of metal between the adjuster and inside swing arm and then tighten with a new washer and flatten out the swing arm dish, take all out and add a bigger shim to prevent new dishing, would need a sacrificial adjuster as it would get a knackered thread from hammering     

4719
FZS600 Fazer / Re: Rear Axle
« on: 10 September 2015, 07:15:08 pm »
That swing arm looks dished to me !

4720
General / Re: What you listening to
« on: 10 September 2015, 12:52:07 pm »
This
In the dark on my own

4721
General / Re: Today's "What Gets My Goat"
« on: 10 September 2015, 12:51:19 pm »
Perhaps you could get off your bike and rub it on the floor  :rollin

4722
FZS600 Fazer / Re: Seat question
« on: 10 September 2015, 12:08:00 pm »
Paint the bit that you can see under the seat black to match the seat and it wont be so noticeable if it is bothering you

4723
FZS600 Fazer / Re: Rear Axle
« on: 10 September 2015, 12:03:30 pm »
Quote from: darrsi on 10 September 2015, 11:25:19 am
Quote from: fazersharp on 10 September 2015, 10:48:37 am
I dont think that  the swing arm is dented from looking at the picture and if it is I wonder if a good thick stainless steel washer would be less likely to bend


Of course the swing arm is indented, there's now way you would curve a washer of that thickness on a true flat surface.
Yep I understand all of that of course, but what I said was the picture dosen't look like the arm is dished, makes sense that it is but it dosen't look it from the picture.

4724
FZS600 Fazer / Re: Rear Axle
« on: 10 September 2015, 11:09:13 am »
Quote from: HarryHornby on 10 September 2015, 10:57:18 am
2 washers????  :b   as long as the nut on the other end had plenty of thread that would be ok?
I think there is enough at the other end but as darrsi said I think a smaller washer under would just put even more pressure and dent  the swing arm.
What about a steal box section inside the swing arm to prevent any extra denting

4725
FZS600 Fazer / Re: Rear Axle
« on: 10 September 2015, 10:48:37 am »
I dont think that  the swing arm is dented from looking at the picture and if it is I wonder if a good thick stainless steel washer would be less likely to bend

Pages: 1 ... 187 188 [189] 190 191 ... 277