1
General / Re: Just a joke
« on: 19 December 2013, 02:41:11 pm »
So what if I can't spell armaggedon.
It's not the end of the world. Ö
It's not the end of the world. Ö
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
1
General / Re: Just a joke« on: 19 December 2013, 02:41:11 pm »
So what if I can't spell armaggedon.
It's not the end of the world. Ö 2
FZ6 / Fazer / Re: Rear seat cowl« on: 25 November 2013, 12:25:41 am »This in my opinion is the best seat cowl on the market. Not to sure on price so the best bet would be to send them a e mail. They should put you on to a UK dealer then you could put a order in after pricing one up. 4
FZ6 / Fazer / Re: After market cans for my 54 fazer under seat pipes« on: 13 November 2013, 12:10:38 am »
Had scorpions on mine for last five years highly recommended.
5
FZ6 / Fazer / Re: Seat lock seized - ideas?« on: 13 November 2013, 12:06:25 am »I had exactly the same problem last winter. you need to get under the bike. As Ive got Scorpion exhaust it's real easy to get at the catch that is holding the seat in place. You need to use a long thin screwdriver to push / slide the mechanism to release the seat. So anybody that rides in damp wet conditions is going to suffer this problem as the seat lock mechanism is exposed when you install aftermarket exhaust cans and is going to seize, so it's important to give this area some regular attention . Hope this helps. 8
General / Disgusting Behaviour!!« on: 21 July 2013, 08:58:12 am »
Todays bike ride ended up with some absolutely disgusting behaviour which I saw on the beach. I was on the seafront and saw a man and a woman having an almighty argument in front of loads of kids, suddenly the woman smacked the guy in the head and it all kicked off. There was a massive brawl and someone called the police. This poor copper turned up on his own and took his baton to the man, the guy managed to snatch it off him and began assaulting the copper AND his wife! Then out of nowhere a crocodile crept up and stole all the sausages!!..........
9
FZ6 / Fazer / Re: after market exhaust FZ6 help« on: 21 June 2013, 09:53:34 pm »Hi all just got a 07 fz6 and looking at fitting some after market exhaust but i have some questions 10
General / Re: Blowout« on: 07 June 2013, 11:29:13 pm »British Standards for puncture repairs [size=78%]A British standard exists for motorcycle tyre repairs (BSAU159f), which determines the strength of the repair and where it can and can’t be made in the [/size] Being a British Standard, it is a recommendation only, and not the law. BSAU159f states that no repairs are allowed in the sidewalls (these flex continuously and a repair is likely to fail), and the standard says repairs are not allowed on high speed Z-rated tyres. It says a tyre must be inspected by an expert for secondary damage (a nail which punctures the tread might also damage the sidewall inside), run-flat damage (determined by a darkened or marbled appearance inside the sidewall), exposed cords and so on. Michelin, however, is the only manufacturer that recommends that its Z rated tyres can be repaired in accordance with the previous BSAU159e. Repairs can only be made in the centre of the tread area, to within 25% of each side of the centre line. Only two repairs per tyre are allowed up to the J (62mph) speed rating, and one up to the V (over 130mph with 155mph maximum) speed rating. Up to the J rating, repairs no bigger than 6mm are allowed, and up to the V rating only up to 3mm is allowed. All repairs must be carried out with a mushroom-type plug, which fits into the puncture hole from the inside and bonds with the tyre by vulcanisation. Anything else and the BS says the tyre must be chucked. If your tyre repairer says the same and quotes similar reasons, he’s being honest. 11
General / Re: Blowout« on: 06 June 2013, 08:02:25 pm »U mean tyre off the rim or puncture? Puncture 3/8 drill bit straight through centre of tread hit inside of wheel then bent over. Blimey are you ok? how fast were you going etc? Very lucky just came from a 60 down to a 30 then bang. How big's the hole? The hole was 10 to 15 mm ,tyre fitter says 3mm max for a plug. 13
General / it's completely legal to filter?« on: 03 June 2013, 08:30:21 pm »Thought this was interesting, filtering past stationary traffic is no longer a grey area - it's completely legal......read on http://www.facebook.com/l.php? u=http%3A%2F%2Fwww.motorbikestoday.com%2Fnews%2FArticles%2Ffiltering_law.htm&h=uAQFE_JejAQGQuoZYvl_jVjFCOPtFE4H4IaA7-p2Hj8MJTA&s=1 14
General / With or Without« on: 29 May 2013, 09:13:23 am »
Just a quick question.......Do you ride with your baffles in or out.
15
General / Re: Rucksack« on: 12 May 2013, 11:01:35 am »Thanks again for all your feedback very much appreciated,and Simonm that rucksack looks cool. [size=78%]Posted a pic below of my old bag which holds about 15L and this is the size I'm looking for. I have got bigger bags but find them a bit to big for work with just a snapping box and a few bit & bobs which look lost in there.[/size]15 litres, you could almost fit that under the seat (joke) Agree with you on that one Simonm, but like the pic I posted the Hein Gericke one did the job for me. Noticed on there website you can't order that one on line anymore, but it does say in store only. The only problem now is they closed the one near to where I live, so still looking. 16
General / Re: Rucksack« on: 10 May 2013, 08:36:26 pm »
Thanks again for all your feedback very much appreciated,and Simonm that rucksack looks cool. [size=78%]Posted a pic below of my old bag which holds about 15L and this is the size I'm looking for. I have got bigger bags but find them a bit to big for work with just a snapping box and a few bit & bobs which look lost in there.[/size]
17
General / Re: Rucksack« on: 10 May 2013, 08:50:45 am »
Thanks guys, for the feedback, got the tank bag, tail pack etc but need a small backpack like I said don't seem to do the Hein Gericke one now which was perfect. Had a look round yesterday but did not get fixed up as most none motorcycle rucksacks don't have a waist/chest strap to keep the bag tight. If I don't get fixed up I will probably look on line for one.
Cheers Phil. :-) 18
Hi guys, I have had numerous rucksacks for work but find most are to big. I used to have a medium sized one from Hein Gericke but they don't seem to make the one that I normally have anymore. This bag used to be a similar Shape to the hump on the back of leathers, so I was wondering what kind of rucksack you guys could recommend.
Cheers Phil. 19
Introduction / Re: Hello there« on: 06 May 2013, 05:47:16 pm »wey hey we've got a fazer doing a summersault going on there.(actually just seen you corrected it) i cant talk though as most of my recent pics were going up sideways. Thanks for the welcome guys, the pic with the tank protector is around three years old and I don't have this any more. The other pics are more recent so this is what the bike looks like at the moment. Thanks noggythenog for the info will take a good look round when I've got more time. Like I've said had the bike over six years now so might have come a cross a few probs which I would could share with people on this forum, but saying that I'm not that good with mechanics. Cheers Phil. 22
Introduction / Re: Hello there« on: 04 May 2013, 09:47:25 pm »
Thanks to noggythenog sorted out a pic of my .
23
Introduction / Re: Hello there« on: 04 May 2013, 06:17:04 pm »
Hi guys, not to sure how to upload a photo to this page, tried a couple but when submitted seem to go the Media album. Is there another way to upload on to the page that you are viewing.
Cheers Phil. 24
Introduction / Hello there« on: 03 May 2013, 10:44:07 pm »
Hi all, just thought that I would introduce my self to the forum. My name is Phil, and have owned my FZ6 S2 for over six years. I have had this bike from new and still love every minute on it. It's a 07 reg and I have made one or two changes along the way, like new pipes, belly pan, seat cowl etc. Will try and post some pics of my bike later, when I get used to the forum.
Many thanks Phil.
Pages: [1]
|