This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - 2old2boogie
1
« on: 02 March 2016, 10:21:47 pm »
For sale Renntec rear rack for 98 FZS 600. As new condition. £25 collection from IG6 3BA. Phone 07949 944 456.
2
« on: 06 November 2015, 05:34:17 pm »
I have a FZS600 seat from a 2000 bike. It has a small repair, a black 15mm patch, apart from that its very good.
3
« on: 13 October 2015, 05:41:53 pm »
Adjusted the TPS on my 98 boxeye, finally. I started the job last week but chewed up the torq screws despite me using the correct bit. Couldn't get the barstewards to shift! Had to resort to chopping the heads off with a 22mm cutting disc on my Multitool. Fitted 2 allen head bolts which should ensure they come off easy next time. 
4
« on: 20 July 2015, 09:36:25 am »
Whoops, forgot to add the price!! £1400. Also has a rear hugger and those sporty short levers fitted and a Renntec rack. I'll try and show some photos. .
5
« on: 19 July 2015, 08:22:47 pm »
Up for sale is my 1998 Fazer 600. It's red and has 10,016 miles, MOT's confirm the low mileage and runs to March 2016. Condition is excellent, apart for some light corrosion on the forks. Starts 1st push of the button, no nasty noises, strong smooth engine. Brakes excellent, Michelin tyres good. I am in IG6 3BA (London/Essex). PM me if you're interested.
6
« on: 11 April 2015, 09:07:19 pm »
For sale a Bagster tank cover from my Mk1 (98) FZS 600. It's red and in excellent condition.
£40 + postage.
7
« on: 14 January 2015, 05:20:05 pm »
I've got one in the shed, from a year 2000 FZS 600. It has a small 1" patch which is not noticeable, otherwise is good.
Yours if you can collect. London/Essex area.
8
« on: 26 September 2013, 08:50:17 am »
Cheap price = cheap parts. What I am selling is the 4 rubbers (52 each on the link) and the blanks and fittings. About £220 from that site. I think £60 is very reasonable.
Glad you agree these parts can be bought quite cheaply brand new. They look good quality too. Can't be any worse than Yamaha's OE items anyway, they begin cracking up quite early.
9
« on: 25 September 2013, 05:14:34 pm »
I bought 4 for my 98 FZS600 for £75 a couple of months back, have not fitted them yet they are still in the shed. Brand new parts.
On the box the part number is 229845.
HTH
10
« on: 08 September 2013, 01:52:54 pm »
All done now. Got a HEL Braided hose from Wemoto. Fitted this morning, usual hassle priming but considering these things are usually a pain to bleed, it was quite straight forward really. I even got it done before the rain arrived.
Have only road-tested in the confines of my back garden so far, but it's fine, nice firm pedal. If the sun makes a re-appearance this afternoon I shall test it further.
Thanks for the helpful feedback. Really appreciated.
11
« on: 03 September 2013, 12:18:42 pm »
Latest on this TRX to FZS upgrade is that I've fitted the new (to me) caliper onto my Fazer, and after the normal ease and grease service I have got almost as far as bleeding. Yes almost is the operative word. The hose is too short! So sods law stops play.
I should have paid more attention to previous posts as I was advised to get the 'donor bike's hose as they're a bit longer'.
Nuff said, I'll order one.
12
« on: 28 August 2013, 02:45:30 pm »
Just an update to say I've ordered from Ebay a TRX Caliper and torque arm, from the pics on the posting it looks like the carrier is included. Thanks again for pointing me in the right direction. I'll keep you posted.
13
« on: 27 August 2013, 02:41:50 pm »
Good point, no I don't, not on the rear brake. But I do need a working rear brake, I have been faffing about with 2 dodgy Fazer calipers trying to make 1 useable one. And the summer is fast disappearing. Thanks for the expert advice, greatly appreciated.
14
« on: 27 August 2013, 01:38:12 pm »
....for the rear brake of a FZS 600 '98? I have been told that a R1 will fit with some filing of the mounts, and a TRX will fit with it's carrier and torque arm. So what is the best brake to fit?
15
« on: 19 June 2013, 01:30:50 pm »
1998 Mk 1 Red 34,000 miles. T&T. Just not being used. 100% reliable. New Bridgestone tyres. New front wheel bearings. New brake pads all round. Newish Yuasa battery.
Bad bits (there's always some!). The speedo has stopped working, probably I have refitted the speedo-drive incorrectly after the tyre change. The bodywork is a bit shabby, plastics not holed at all but some scratches.
I thought I would offer it on here before Ebaying it.
£850
16
« on: 31 January 2013, 04:57:41 pm »
I run a 98 FZS600 and recently fitted EBC HH to the front and rear, I recommend them. Good sharp progressive reponse.
17
« on: 30 January 2013, 02:34:01 pm »
PM sent
18
« on: 30 January 2013, 11:07:39 am »
Fazer 600 Mk1 (1998) front wheel in good undamaged nick. Both discs are almost new, tyre is just about legal with 1.6mm of tread. Bearings are fine.
£30 would much prefer collection from Ilford Essex. Any postage costs would of course be at buyers cost.
19
« on: 30 January 2013, 11:00:44 am »
Bagster black tank cover from my FZS600 Mk 1 (1998). Very good nick, not damaged or marked at all.
£30 + posting
NOW SOLD
20
« on: 18 January 2013, 05:58:18 pm »
Yes that makes sense, dilute it with Super Unleaded. I'll do that. Thanks for the input.
21
« on: 18 January 2013, 02:53:24 pm »
I have an old tank (from a Diversion) that is full of petrol that has been in there for most of the year. It will I know, be trouble if I stick it in the Fazer. But I'm reluctant to waste it. Is there an additive on the market that will make it useable?
22
« on: 14 January 2013, 04:00:26 pm »
Well you introduced the bike...............Welcome. Good looking bike.
23
« on: 10 January 2013, 09:22:52 am »
But Yamaha have done all the research on the model! Must know something NGK don't eh! 
24
« on: 10 January 2013, 09:18:21 am »
Thanks lads
25
« on: 09 January 2013, 06:32:35 pm »
What plug is recommended for a 98 FZS600 Mk1? NGK CRE9E or CRE8E?
|
Show Posts
