Bikes, Hints'n'Tips > Fazer 1000/FZ1 corner
Swing arm bolt
(1/1)
tomjimtom:
Hi, going to grease my swingarm bearings and such, but before I go to halfords an buy every socket between 25 and 32, can someone tell me what size the nut is? :)
Also, do i need to take the swingarm off completely? I've already greased the suspension etc, and got the rear wheel off :)
Thanks
Tom
bludclot:
the swingarm nut takes a 27mm socket. you'll have to remove the arm in order to check / grease the two main bearings. re-torque to 125nm / 92lbft.
if you are local to portsmouth i have the tools you can borrow.
bludclot:
when i remove a swing arm i masking tape an old newpaper to the chain side of the arm for removal and re-fitting - it prevents the chain marking the arm.
tomjimtom:
Thanks, got the socket today on the way back from work :)
I'm not local enough I'm afraid, especially with a rear wheel missing :lol but thank you for the offer.
Looks like I'll have it all apart then, which means EVERYTHING will be covered in grease :)
Thank you again,
Tom
Navigation
[0] Message Index
Go to full version