Date: 28-03-24  Time: 18:03 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Volgen83

Pages: [1]
1

Hi Everyone,


I'm new here and thought first i should say hello all.


About 2 weeks ago i notices my head lights pulsing when the bike was warming up, very slight but you could see it.
i checked the battery and gave it a charge, a few days later the same thing and found the battery was not being charged so went down the stator route, the stator itself was not putting out any voltage so replaced it.
but... same issue, after checking the outputs of the rectifier i replaced that and the battery as it was a bit old.


And here i am, new stator which is putting 72v AC and the rectifier is putting out 14.2volts DC at 2.5k RPM.
i have pulled the tank off and tested the ground cable from the rectifier and the battery, cant see any damaged or warn wiring, rectifier plus seems ok, i get a reading from the battery via the lead but when it's all connected up and bike is at 2.5k RPM i'm only seeing a rise of .50Volts DC and at idle im loosing 0.03 Volts every few seconds as if there's a drain. i'm stumped only thing i can actually find thats not right is the resistance off the 3 white wires from the stator is 0.8 ohms.


i'm outta ideas. anyone wiser than me have any clue?

Pages: [1]