Date: 28-03-24  Time: 15:31 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ptolemyx

Pages: [1]
1
Fazer 1000/FZ1 corner / FZS1000 fast idle
« on: 10 September 2019, 02:49:18 pm »

Bike has been laid up for a while. I had the carb's ultrasonic cleaned because the throttle valves were stuck in the closed position . They had previously been full monty Ivanised by Mike and all was well up until I had to stop riding the bike. Now has 7k error code which is obviously the EXUP faulty after a period of non-running. I will sort this out but...….
     Bike started up fine but settled to a very fast idle, well over 2000rpm and fiddling with the idle adjuster does nothing. Is this likely to be due to the EXUP  before I check the throttle cables and, if needed, tear the carb's back off - which I'm loathe to do yet again? Could the fast idle be due to incorrect float heights when reassembled by the ultrasonic guys at Ragged Moto?

2
Fazer 1000/FZ1 corner / Pod air filters
« on: 19 November 2018, 06:43:22 am »
I know it's dubious but has anyone replaced the airbox with pod filters on a gen1 and it ran okay???

3
For Sale & Wanted / FZS1000 front wheel
« on: 27 August 2018, 09:49:27 am »
Reasonably good condition, but please note last picture shows a barely perceptible dent, less than 0.5mm deformation. Wheel runs straight and true. Bearings are good.
£100.
Price includes secure packaging and delivery by Hermes, which will cost me about £10. Or you can collect from North Devon.

4
For Sale & Wanted / FZS1000 - 2001 forks
« on: 22 August 2018, 07:17:56 am »
As they came off my 2001 bike with less than 13,000 miles on the clock. Slight pitting to lower part of stanchions but passed mot okay. Oil seals popped at a track day so need replacing. As far as I know stock internals; previous owner might have fitted different springs but still feels stock squishy to me.

Offers please:-

5
Fazer 1000/FZ1 corner / Ivanising
« on: 13 December 2017, 05:37:17 am »
Just had Falcon269 do the Ivanising  and other intake work on my FZS. As others would have found out he's a top bloke who knows the carb' upgrade job inside out. A million thanks pal :)
I had my doubts, but straight away from the first test ride I could tell an appreciable improvement in responsiveness and definitely more get up and go from the smoother idling right up through the mid-range - haven't had a chance to max it out yet but will do asap  :evil  Bike rides like it's new and not an old nail  8)
I'm definitely now another one in the camp of "you must get this mod done"

6
Fazer 1000/FZ1 corner / Airbox removal
« on: 20 November 2017, 10:46:02 am »
What am I missing? How do you get the airbox out of the way on a gen1 to work on the carbs??????? I've got tank (including rear bracket) off, side covers off, airbox sides off, airbox lid off, battery out, as many screws and bolts and hoses as I can find undone. I've the airbox loose off the carbs but can't see how to remove it completely from the bike. Do you have to separate the front and rear parts of the airbox, if so how do you get at the screws? Shop manual says drain the coolant; why???

7
Fazer 1000/FZ1 corner / gen1 fuel filter(s)
« on: 16 November 2017, 08:19:33 pm »
As well as the fuel filter between the tank and fuel pump should there be what looks like a fuel filter between the fuel pump and carb's? I've good flow to the offending article and poor flow out of it????? If it's an auxiliary filter will I be okay to bypass it or is it some kind of check valve - doesn't seem to be a one way valve just poor flow blowing through it in either direction. I think a previous owner may have fitted it??? Pic shows the item in the hose between pump and carb's (temporary routing whilst working on the bike):-


8
For Sale & Wanted / Motorcycle trailer
« on: 09 October 2017, 09:18:29 am »
No longer doing drag and van sharing for track days so my single bike trailer is up for grabs. Will take extended swingarm B-King (2450mm overall length) and has carried my 250kg wet weight Busa. The channel is 212mm wide so you could get a 240 section tyre in there. Everything is in fine working order, just a few bits of surface rust that could do with rubbing back and a lick of paint. Does not come with ramp or Mazda shown in photos! I'm in North Devon.

£150 - reasonable offers anyone????

9
Fazer 1000/FZ1 corner / airbox modification
« on: 27 September 2017, 09:44:21 am »
Has anyone modified the airbox? The area of the air intake looks, at first impressions, to be rather small.......

10
Fazer 1000/FZ1 corner / USD front
« on: 02 September 2017, 04:37:51 pm »
Finally, well more or less, got the USD front finished on the Fazer. Sacrilege I know, but waddyathink guysngals?

11
For Sale & Wanted / FZS1000 - 2001 front end
« on: 17 August 2017, 09:53:49 pm »
From low mileage bike 16000miles only, all parts vgc.Whole of front end apart from mudguard available after going USD.
       Forks need new oil seals, otherwise ok with minor pitting at top of legs that does not affect mot. Other parts:- wheel (currently bare without tyre or discs shwn in photo below), spindle, stock discs, calipers, top and bottom yokes (excludes ignition barrel and upper stem nut), stock and renthal bars, stock and black custom risers. Some other chassis bits also available, let me know what you want.
Anyone interested please pm me.....

12
For Sale & Wanted / FZS 1000 seat base wanted
« on: 07 March 2017, 09:56:55 am »
Anyone have a skaggy seat they want rid of? I want a "resculpted" seat (ultra thin foam and hump on pillion section) and also want to keep my stock seat.

13
Fazer 1000/FZ1 corner / FZS 1000 seat base wanted
« on: 07 March 2017, 09:56:01 am »
Anyone have a skaggy seat they want rid of? I want a "resculpted" seat (ultra thin foam and hump on pillion section) and also want to keep my stock seat.

14
Events, Meets, Ride outs etc / Loomies Saturday 4th March
« on: 01 March 2017, 12:39:04 pm »
Anyone fancy meeting up at Loomies around noon this Saturday? I'll be leaving Exmoor around 9.30........on the Busa as the Fazer is currently on the operating table having a respray and general tinkering of it's bits  :rolleyes

15
Fazer 1000/FZ1 corner / Track day Llandow 9/6/17
« on: 27 November 2016, 06:40:16 am »
Going to take the FZS1000 to Llandow for a track day with the SouthWest Bikers crew. We may have places available if anyone wants to play???
  Have the bike in the workshop for fettling - will fit decent rear shock off a B-King - not sure what to do to uprate the front suspenders for track days. USD conversion will be a pain, what can be done with the stock front end?

16
Fazer 1000/FZ1 corner / disconnecting main keyswitch
« on: 01 October 2016, 02:54:04 pm »
I want to completely remove the top yoke to respray it. How do I disconnect the wiring to the main key switch? Or will I have to drill out the (very hard) security bolts to remove the whole switch assembly from the top yoke????
I've downloaded the workshop manual and can't find an answer there.

17
For Sale & Wanted / FZS1000, gen1 - wanted fairing lowers
« on: 18 September 2016, 06:37:24 am »
Want fairing lowers (not a belly pan) for red 2001 bike. Are they available? Where? Price?

Pages: [1]