Date: 28-03-24  Time: 18:20 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Stinka

Pages: [1] 2 3 ... 5
1
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 18 August 2021, 08:58:26 am »
My two bob's worth and friendly advice only, tell me to piss off if you want.

Keep it ..... join a local RoSPA Advanced group and change your style of riding!


and be VERY well behaved for as long as the points are active.


You'd miss it if it wasn't there and you are just as likely to get nicked in your car in a 30mph limit as you are on a bike. Just re-think how you ride/drive.


Best wishes


Sounds good, but I’ve promised my 2 young daughters I’ll sell it, and mentally I’m committed to getting rid


Thanks anyway

2
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 05 August 2021, 10:54:02 am »
Hence the ono

3
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 05 August 2021, 08:45:16 am »
What a stupid and unhelpful comment. I see you’re a mod as well  :rolleyes


No wonder this place has died a death

4
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 04 August 2021, 06:48:00 pm »
Throttle is better than the original once you get used to it

5
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 04 August 2021, 12:28:06 pm »
Anyone ?

7
For Sale & Wanted / Re: 04 fzs1000 gen 1 fully sorted FS
« on: 28 July 2021, 08:15:12 pm »
This is a very sorted bike. Very sharp handling and set up well by revithard in Newcastle under Lyme. Mot until April I think but loads anyway. I’ve been using it daily in this good weather. I’m honestly gutted, but I’m an Hgv driver and I cannot moderate my self, 6 points for silly speed has been a wake up call and I’ve just got to let her go before it costs me my lively hood.




8
For Sale & Wanted / 04 fzs1000 gen 1 fully sorted FS
« on: 28 July 2021, 08:02:20 pm »
Just got 6 points and it’s got to go. I’m gutted as it’s absolutely mint


Black/grey black engine


48k

R1 1/4 turn throttle tube
Black Zero gravity screen
S1000rr shock
Stiffer ktec fork springs about 3k ago
R1 head gasket fitted and head stripped cleaned,  valve clearances etc about 600 miles ago
Ais delete
Renthals
New c&s
New bt016 tyres f&r
Ultimate addons iPhone 8plus phone Mount
Braded hoses not yet fitted tho
Bar end mirrors, still have originals
Mivv titanium
Exup serviced


£2500 Ono

[inserted photo - bkd]

9
Fazer 1000/FZ1 corner / Re: Gen 1 top end rebuild
« on: 18 March 2021, 07:51:47 pm »
So after a second set of 4xv cams again with no oil ways through cam, I’ve got a set of fzs1000 cams


So. Early r1 4xv cams 98-00 will not fit from my experience, which is counter to everything Ivan has recommended in the thread posted by falcon

10
Fazer 1000/FZ1 corner / Re: Gen 1 top end rebuild
« on: 18 March 2021, 12:54:42 pm »
Okay so the shop have built bike up and now they are saying the 4xv r1 cams won’t fit as there is no oil way in the cams

11
Fazer 1000/FZ1 corner / Re: Gen 1 top end rebuild
« on: 15 March 2021, 05:40:45 pm »
So that says the cam pulleys are slotted ?! They are not, and all the pictures I can find shows they aren’t


So putting r1 cams in at stock cam timing is going to kill my midrange


Ah well

12
Fazer 1000/FZ1 corner / Re: Gen 1 top end rebuild
« on: 24 February 2021, 10:40:10 am »
Also do 4xv cams fit ? As loads about and cheaper than fzs1000 cams

13
Fazer 1000/FZ1 corner / Gen 1 top end rebuild
« on: 24 February 2021, 10:36:31 am »
So my guy is getting the head off as the valves and cam are worn


Anyone got a decent inlet cam about ?


Also is it worth fitting an r1 head Gasket to bump compression a bit ?


Where is the best supplier for valves and gaskets ?

14
Fazer 1000/FZ1 corner / Re: Rear Shock Upgrade
« on: 22 June 2020, 12:15:43 pm »
S1000rr shock is the dogs danglies

15
Fazer 1000/FZ1 corner / Re: Removing crash bungs
« on: 07 May 2020, 04:53:31 pm »
Hello. Original engine mount bolts Gen1 Fazer 1000.


1x 10 mm bolt 110mm long.
2x 10mm bolt 115mm long.
1x 8mm bolt 115mm long.


All measurements taken from under bolt head.


Hope this helps.   :)


Awesome thanks !


I take it they are the lengths Without the slider ?


And bolt shank widths, not hex head widths ?

16
Fazer 1000/FZ1 corner / Removing crash bungs
« on: 07 May 2020, 04:07:37 am »
Hi lads


I went to remove my crash bungs and took the left one off, put the bolts back thru the engine mount and realised I needed either shorter bolts or thick spacers/washers to get the nut to butt up against something, due to threads not going far enough up bolts


Can anyone spec me new bolts to order or spacers ?


Just need length and width


Cheers


I’d have measured them but silly me lost my tape measure  :rolleyes

17
General / Re: caroline flack
« on: 15 February 2020, 06:20:04 pm »
Yeah it’s pretty shocking this whole debacle

18
General / Re: Post your 'Winter hack' bikes
« on: 08 January 2020, 03:29:27 pm »
I’m a bit of a tart, I dont ride in winter. But today I had to check if she was ok as moving to a new place next week. I expected the old girl to be dead as not touched it for 3 months now, put key in, pressed the button and nothing, not even a click. So I jumped it off my car and she fired straight up  :D  warmed her up for a few mins and off I went for a blast. Jesus Christ I’ve missed the power, what an absolute beauty she is, and running perfectly despite her extended hibernation

19
Fazer 1000/FZ1 corner / Re: Mirrors useless gen1
« on: 08 January 2020, 11:09:04 am »
At one time there was spacing blocks available on eBay, not seen them for a while

20
Fazer 1000/FZ1 corner / Re: New bike
« on: 17 September 2019, 04:38:32 pm »
Looks lovely mate. Same colours as my 04. Although that does look a bit tidier ! Mines done 46k mind

21
General / Re: Picos de Europa, Hotel Advice
« on: 12 September 2019, 06:43:19 pm »
Cheers guys


I’ll be sure to check that write up out, hedge trimmer, I loved the last story of yours that i read, you’re a bit of a legend mate  8) :D

22
General / Re: Picos de Europa, Hotel Advice
« on: 10 September 2019, 04:38:00 pm »
This looks amazing!! I’d love to attempt a trip like this. How much would it cost ? Do you do it in one hit or stop in France overnight? How much fuel to get down there ?


So many questions !

23
General / Re: man down...
« on: 28 August 2019, 02:47:38 pm »
Bloody lucky mate, glad you made it. Crazy story this ! These lowlife don’t deserve to walk this earth.

24
For Sale & Wanted / Re: FZS1000 for sale
« on: 28 August 2019, 10:46:02 am »
Just saw this on ebay, looks tidy

25
General / Re: man down...
« on: 26 August 2019, 10:20:46 am »
Jesus sounds horrific. Glad he’s not seriously injured or worse still :eek




Pages: [1] 2 3 ... 5