Date: 28-03-24  Time: 19:28 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Geedog

Pages: [1]
1
FZS600 Fazer / LED Flashers
« on: 03 July 2018, 03:45:08 pm »
Hi all
So I’ve got some LED flashers on the bike now and swapped the old flasher relay or an LED one...can anyone enlighten me as to why they dont flash? They just light up once and stay on....do I need inline resistors too?


Help?!


TIA
Aaron

2
FZS600 Fazer / An easy one I expect...forks re-assembling
« on: 11 April 2018, 08:09:22 pm »
So I thought I’d be ok doing this but after a week waiting for the seals to arrive it seems i’m Stumped getting them back together..or have forgotten a step..


New seals and dust caps are on and top fork is in bottom fork nice and snug..


The next step - I thought was to put in the damper rod along with its spring and screw in the bottom screw/plug from the end of the bottom fork...on doing this - the top fork is now fixed with no movement which cant be right..


Am i being dumb? What have i done wrong ? (Apart from leave it to a professional..!)


 :eek

3
FZS600 Fazer / Noisy speed sensor??
« on: 26 March 2018, 08:19:41 pm »
Can anyone shed any light on an issue..?
At around 35-40 mph I’m getting a whistling sound from the front end of my 2003 FZS600, I thought it might be something stuck in the fairing so investigated that and came up with nothing.
I took off the brake calipers and spun the wheel with drill and found the sound coming from it appeared to be the sensor area or bearings.
Took off the wheel and the bearings were very stiff, unable to turn with fingers. Started process of removing them and once slightly loosened off the spacer bar have freed up considerably so not sure its anything to do with them...
The moving part of the speed sensor is a little slack - is there supposed to be any movement..? ( other than spinning..!)


Any help appreciated
Az

Pages: [1]