This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - kylron
Pages: [1]
1
« on: 25 June 2016, 01:25:52 pm »
Was looking at an 06 fz1n with 14000m ,looking online they seem to have issues with fueling , stator problems and valve stems wearing.how common are these problems , does anyone have any experience with that years model.
2
« on: 03 August 2014, 02:12:18 pm »
After having issues with the front bt023 tyre I thought I'd check the rider sag.the bike has standard front suspension with an R6 rear shock from devilsyam.
On the front I got a reading of 28mm with the preloaded all the way in to position 1
On the rear I started with the preloaded on 4 with a sag of 50mm and got it down to 41mm with preloaded at 7
The rest of the front suspension is standard settings and the rear settings are as devilsyam supplied the shock.
My weight is 14.2 stone without riding gear although I was wearing it when checking the sag,I'm more of a you're than racer in riding style.
Do these figures seem OK ? Any advice appreciated.
3
« on: 01 August 2014, 04:55:30 pm »
Just had to change the front BT 23 on my gen 1 as it had worn on the right hand side.it had quite a pronounced step between the harder centre compound and the softer side tread,I would say around a 3mm difference which was really noticeable turning right.
The tyre had 6000m on it and I ran it at 36psi.
Has anyone had anything similar with this tyre or an idea what could be causing it.
Checked wheel alignment and all seems good.
4
« on: 07 October 2013, 04:02:13 pm »
Looking for a standard screen for a gen1 if anyone's got one they want to sell.
5
« on: 29 September 2013, 10:54:58 am »
Does anyone know if there's a clutch bracket with a mirror mount that will fit on the gen 1 to allow me to fit mirrors on the handlebars.
6
« on: 25 September 2013, 09:09:40 pm »
Black 2003 fzs 1000 for sale,34000mls,good condition,has new battery,sparkplugs,exup serviced.oil filter /oil changed every 3000 mls.
It has a hugger,scottoiler,luggage rack,crash bungs,spare screen.
Looking for £2450.00
I don't know how to post photos from a mobile on here but can email them to anyone that's interested.the bike is in the highlands in Scotland.
7
« on: 28 August 2013, 04:20:22 pm »
MRA street fighter screen to fit gen1,good condition
£35.00 incl p+p
8
« on: 30 April 2013, 05:54:02 pm »
After finding out I had a bike originally meant for France thanks to Dddddaves post I have a couple of questions.
Are the restrictors attached to the carb tops,kind of tophat shaped with a spring going into the middle of them,?
Is this the only restriction , the bike is a 2001 model FZS 1000.
9
« on: 07 April 2013, 10:41:55 pm »
Just wanted to thank ghost biker again for the stainless exup bolts he recently sent out,finally got round to fitting them,had to take the exhaust off and heat one and drill another to get the old bolts out.
Have ordered some stainless nuts for the header pipes so next time it will hopefully go a lot smoother.
10
« on: 09 February 2013, 11:51:56 pm »
Has anyone tried any of the cheap CNC levers from eBay.2wheels seems to come up often as a supplier.I can't afford the top end ones like pazzo and just wondered if there was a cheaper alternative that worked well.
11
« on: 25 January 2013, 10:47:38 pm »
Anyone know if they still do the low street fighter screen for the gen1 ,I seen it on one of devilsyam bikes
And like the look it gives the bike
12
« on: 14 April 2012, 08:31:24 pm »
hi i live in the highlands been riding for around 30 years,got an 03 fazer 1000 had it about a year now and very happy with it.
Pages: [1]
|
Show Posts