Date: 16-01-18  Time: 07:32 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Disorderlypunk

Pages: [1] 2 3 ... 18
1
FZS600 Fazer / Re: Over fueling "pop pop pop"
« on: 13 January 2018, 01:29:41 AM »
as much as i like to take a ride to help someone out i dont think devon/cornwall is within my area of 'reasonable distance' to come have a look lol
(cornish liberation army might have my head off)

2
FZS600 Fazer / Re: Fazer Valuation
« on: 12 January 2018, 10:45:25 PM »
im sure if you walked in with 1525-1650 in cold hard cash and said that is the best you can do (dont do a 00 number) the sight of the cash will twist his arm - i say dont do a 00 number because it is a physiological thing that a 00 number you can get a bit more a 25 shows you are trying - hope that makes sense

3
FZS600 Fazer / Re: Fazer Valuation
« on: 12 January 2018, 11:05:08 AM »
paid 450 for my 2k but its in a hell of a state

4
FZS600 Fazer / Re: Over fueling "pop pop pop"
« on: 11 January 2018, 01:51:35 AM »
how black is your exhaust tip ??????
shut garage door and start her up if you can smell it and your eyes are watering its a bit rich
if you collapse and die without noticing a petrol smell then it is fine but you stayed in the garage too long
--WARNING -- i do not advise collapsing and dying


you would be surprised how often we have figured one of our classic cars is rich by simply standing at the back of it
i so wish i was joking but i dont want to live in a nursing home so i will happily shorten it by sniffing exhausts :rolleyes

5
5mm should do the job
as the mrs says its not the size that matters - its how good a job it does


That's not what she said to me  :eek
nope i saw the video - wasnt it 'its not the size that matters but at least learn to use it'  :lol :rollin

6
FZS600 Fazer / Re: Fazer Valuation
« on: 10 January 2018, 07:36:06 PM »
that looks exceptionally clean so i think the price is about right if its coming from a dealer
by any chance is that at j b motorcycles
https://www.ebay.co.uk/itm/1998-YAMAHA-FZS600-FAZER-600-low-miles-exceptional-condition-FSH-12mth-MOT/132462459485?hash=item1ed760ba5d:g:2kUAAOSwEVZaU7bG


looks so similar

7
5mm should do the job
as the mrs says its not the size that matters - its how good a job it does

8
FZS600 Fazer / Re: Puzzling Sidelight/Tail light problem
« on: 10 January 2018, 05:56:16 PM »
standard 10 amp
i blew mine when i took the blown sidelight bulb out and the contacts slipped and touched (yep ignition on like an idiot)

9
yep its a condensation relief hole - i thought the same thing at first as it was blowing like mad - but that was because the exhaust was f##ked

10
FZS600 Fazer / Re: Replacing Rear brake disc
« on: 10 January 2018, 04:17:13 PM »
That's an interesting read.  It makes me think that perhaps I should ditch the air wratchet (not impact driver) when rebuilding and stick to hand tools.


best thing i have read in ages - when dismantling i tend to use a buzz gun for most stuff as it is faster but when reassembling i might use a buzz to get things 95% done  (cam covers mainly) then i switch to hand tools just so i can feel everythings tightness then pull out the trusty torque wrench


11
FZS600 Fazer / Re: Puzzling Sidelight/Tail light problem
« on: 10 January 2018, 04:05:36 PM »
thats the thing i read the earlier posts and was looking behind the triangular side panels and couldnt see a thing
then remembered i had replaced that once in the past so thought it would be best to update the post

12
FZS600 Fazer / Re: Puzzling Sidelight/Tail light problem
« on: 09 January 2018, 01:09:50 PM »
i knew someone would post before i got home to my camera

13
FZS600 Fazer / Re: Fazer 600 not starting
« on: 08 January 2018, 09:54:58 PM »
nice trick with the engine oil hopefully it will loosen off a ring if its stuck
as they all shot up it kind of points more at the rings than the valves which is where i would have instantly thought
might be concerned about a large amount of wd40 getting through the ring gaps and mixing with the oil
but im guessing it hasnt had an oil change in a while anyway so no problem there really

14
FZS600 Fazer / Re: Undertray
« on: 08 January 2018, 04:50:28 PM »
Yes moving it up covers the reflector, I do actually have one fitted but it is not shown in the picture it is one of these  https://www.mandp.co.uk/reflector-30x84mm-rectangular-bolt-on.html and sits tight up against the bottom of the plate in the middle and is held in place whit a short bracket. Its bolted to the bracket with its own inbuilt bolt and one hole in the mudguard behind the plate.
when I moved up the plate I then cut off the bottom of the guard flush with the plate I used the same holes in the guard to mount the plate and brought a new plate and drilled new holes in the correct place to match       
could even just use the oem one under the plate - wonder if my original is still in my parts bin

15
FZS600 Fazer / Re: Puzzling Sidelight/Tail light problem
« on: 08 January 2018, 03:57:18 PM »
ok it was just a slightly misleading post earlier on
the fuse is actually under the seat  in the rear left hand side panel just follow the main wiring loom it might be tucked underneath it
not under the side panel you would first think of

16
FZS600 Fazer / Re: Puzzling Sidelight/Tail light problem
« on: 08 January 2018, 03:41:30 PM »
yet no1 decided to post a photo on the location of this elusive bloody fuse - can i FOC find it

17
FZS600 Fazer / Re: Over fueling "pop pop pop"
« on: 07 January 2018, 09:27:02 PM »
as your going in there then just wait and check everything
standard jets are 115 across the board
if its over fueling then my first guess would be float heights which is enough to check with a piece of pipe and a small ruler
i think is about 4.5mm above carb bowl lip (pre 2000) and 3.5mm (2000 onwards)


get yourself some m4 10mm (i think) full thread cap screws you will want 16 of them and you can replace the shitty screws that hold the bowls to the carbs - for a couple of quid its better to have them and not need them than to need them and not have them and it makes life so much easier in the future

18
if the hardest thing on a c90 is removing old gasket then they must be real easy elsewhere
who would have thought a centrifugal clutch would cause that to happen



19
FZS600 Fazer / Re: Rear light
« on: 06 January 2018, 11:30:36 PM »
i wasnt going to point it out lol

20
FZS600 Fazer / Re: Undertray
« on: 06 January 2018, 11:25:16 PM »
holy crap i forgot about them little brackets i could use for the indicators then i only need to fill the holes


yes there is the reflector bollocks but them little stick on ones will do for the half hour it takes to do an mot
been using them on the chops for years and take them off straight after
on one of the bikes i had a legal plate with a reflector that only ever went on for mot's then replaced with the black one as i left
(once i just showed him it and he passed it lol)

21
ok so this controversial thread rears its ugly head again but on a positive note
my gran (bless her) handed me cash on the deal that i only used it on something for my garage and to enhance my side business
deal i thought so a new set of sockets and a CARBTUNE later i had some work ahead of me
first test came with all kinds of trouble and i knew i had big problems
https://youtu.be/COCTPbbPHeE
after some work i found the problem and someone either cocked up earlier in its life or the fazer has a self moving spring
https://youtu.be/Yh-vl43DTSA
whatever balancing tool you have or are going to get, first buy some extra long screwdrivers it will make your life so much easier - mine just arrived today so i will do it again at some point as i will have better ability to adjust but things are much better now
- this is definatly a worthwile job doing because things are so much better now

22
FZS600 Fazer / Re: Undertray
« on: 06 January 2018, 09:55:24 PM »
i did pretty much the same as fazersharp after seeing his picture
the only difference is i took a jigsaw to my numberplate and trimmed it down a little so i could lift it even higher (could buy a smaller one but wanted legal letter size)
i trimmed the plate so at some point i can put some smaller led indicators on, i just need to find out which adaptors i need or figure a way to make some

23
FZS600 Fazer / Re: Rear light
« on: 06 January 2018, 08:19:36 PM »
ok just went and looked to make sure and it is as you would expect
2x twin filiment bulbs 21w/5w and
pins are offset which is what makes them go in only one way which means they are hooked to the correct circui
tail lights both bulbs iluminated
brake lights both illuminated
see how the pins are offset


switch the bulbs over first and if it still lights the same then it is a problem with the connections if the problem switches sides then its actually the bulbs


you could just check the bulbs with a multimeter if you have one but if you did then you prob would have already


you might find it easier to take the rear section off so you can clean the contacts cause it is a bit tight in there and its only a few screws and a couple of bolts holding it on give the conections a good clean and maybe a rub with a bit of wet and dry


why have two bulbs you may ask - its actually a safety feature because if you do blow a bulb then you have a backup untill you notice the failure - had to ride 20 miles at night with a lad who had lost his single tail bulb once, didnt know the lad but wanted to keep him protected from upcoming cars till we got him home safely

24
FZS600 Fazer / Re: Rear light
« on: 06 January 2018, 08:16:59 PM »
post cocked up so posted below
(any way to delete this???)

25
FZS600 Fazer / Re: Silicone Radiator Hose Kits
« on: 30 December 2017, 10:29:34 PM »
just wondering if a mass of emails from everybody here all on one night will wake them up to the plausibility of reinstating this item
imagine walking into work and having 100 emails titled 'fzs600 hose kits' all from different people
i know i would get my arse into gear about it

Pages: [1] 2 3 ... 18