Date: 24-11-17  Time: 11:00 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - GhostCat

Pages: [1]
1
FZS600 Fazer / Re: Engine rattle/rumble on 2000
« on: 03 September 2017, 08:04:14 PM »
Hi

borrowed my neighbours Carbtune and balanced the carbs yesterday, this was before:


idles better now (increased to 1250 rpm)

Still got a clonky noise though, not as smooth as mates !

GC

2
FZS600 Fazer / Re: U-lock or Disc lock?
« on: 01 September 2017, 09:54:15 PM »
I got an Abus Granit 37/60 disk lock, doesn't fit in the holder but I just chuck it under the seat. *just* fits around the disk, making it hard to attack

GC

3
FZS600 Fazer / Re: Engine rattle/rumble on 2000
« on: 03 August 2017, 01:38:18 PM »
Hi, I didn't do the rubbers, (bought bike in January)  but I just found out my neighbour has a carb tuner ! Yes the revs sit at 1100 ish, I will adjust

GC

4
FZS600 Fazer / Engine rattle/rumble on 2000
« on: 03 August 2017, 01:18:47 PM »
Hi I met up with a friend who has the exact same bike as me and I was amazed at how much smoother and quieter his engine was, I don't know what to do to mine to make it sound so good. Mine "chugs" a bit on tickover and there is a rattle coming from below the camshaft. The thing is, mines only done 10,000 miles and his has done over 40k. I know my carb rubbers were replaced last year. Regular oil changes etc. Standard exhaust (he has aftermarket sports)
Sorry if this seems a dumb question, hoping someone has had the same problem.

Ghostcat

Mates Fazer: https://youtu.be/9aHeQv3jjEY

My Fazer : https://youtu.be/JLelEU8_MlI


5
FZS600 Fazer / Philips Xtreme Vision PLUS H4 Bulbs
« on: 13 July 2017, 09:24:57 AM »

Hi
just wanted to share my experience  - these bulbs lasted about 6 weeks (about 40 hours) each rather than the 450 hours they claimed ! Maybe a voltage or overheating problem ?


GC

6
FZS600 Fazer / Re: 03 Yamaha FZS 600 Fazer Cafe Racer USD fork Swap
« on: 02 July 2017, 07:09:00 PM »
Hi Terje
Well Ive seen a few streetfighter type mods that frankly look terrible, trying to figure out why this one looks so damn good ? Could you post up a couple more pics of the front end ? And give us some details of the instruments & headlight please ?

thanks

GhostCat

7
FZS600 Fazer / Re: Header refurb questions
« on: 25 April 2017, 11:33:33 PM »

 Why? What happens if you spray over the old paint?
If you spray that primer on old paint, it dissolves and puckers up off the metal. Try it yourself on a small area. I would be inclined to just do your deoxidising and spray the PJ1 - its designed to be used without primer.
I hope I wont need the engine out any time soon... happy to live with it at the moment.


GC

8
FZS600 Fazer / Re: Header refurb questions
« on: 25 April 2017, 06:54:54 PM »
A word of warning, if you are going to use that acid etch primer, it requires that every last scrap of black paint is removed, which is really an engine out job. Mine looks a bit like a dogs dinner now.  :'( all the other bits are done, water pipes, headers, snapped the bottom radiator bolt off trying to remove the rad, so back to the shop for drilling ! And waiting on the correct exhaust stud to arrive, they sent an M10 !


GC

9
FZS600 Fazer / Re: Repainting the front of the engine.
« on: 17 April 2017, 08:41:35 PM »
Also could anyone say whether its advisable or necessary to prime the metal before painting, and do I need etch primer


thanks


Ghostcat

10
FZS600 Fazer / Re: Boxeye headlight question ?
« on: 07 April 2017, 11:24:02 PM »
Heres the link http://foc-u.co.uk/index.php/topic,181.0.html
I have some spare flag connectors to connect up the dipped bulb in the right hand headlight  - but easier to just buy an H4 connector as per the last post in that thread


GC

11
FZS600 Fazer / Re: Header refurb questions
« on: 06 April 2017, 07:03:30 PM »
My local mechanic got the stud out. He said "lots of heat". Cost me an hours labour.
Let the refurb begin !
Next question - is draining the coolant a pain as I need to refurb a couple of the coolant pipes


Ghostcat

12
FZS600 Fazer / Re: Header refurb questions
« on: 29 March 2017, 04:53:34 PM »
Well the inevitable happened. After 6 days of religious and thorough plus gassing I took the plunge and snapped a stud on the second from left cylinder - the top stud. Its snapped off flush with the nut so praying that some purchase can be got on the stud. its an awkward spot but i got a socket spanner on it.  I stopped trying there ! hope you dont think i was ignoring your advice but i would rather sort it out now then when an mot is looming  i have alternative transport at least. booked into my local mechanics next week


Ghostcat

13
For Sale & Wanted / WANTED: FZS600 98-02 Engine Bars (Crash Bars)
« on: 26 March 2017, 01:30:25 PM »
Hi
looking for crash bars for my FZS600 2000 model


thanks


Ghostcat

14
Prefer monokey plate, will consider box too

but I'm mostly after the rack/plate
thanks


Ghostcat

15
FZS600 / Re: Fazer Headlight Mod for mark 1 FZS600
« on: 24 March 2017, 07:07:08 PM »
Hi
having just done the mod with the help of these instruction hoping it cant hurt to add my 2p worth you can learn from my mistakes !


Johns original instructions refer to a Fastin-Faston 8mm right angle connector. Having spent a while searching for the right part I figured out there is actually no such thing which is why everyone had trouble finding them ! They are 7.8mm AMP Fastin Flag Terminals. But there are plenty of them on Ebay, just need to search for "H4 connector" I bought a Durite one which had the correct terminals in brass and the terminals in the correct orientation.





Also, to open up the old connector, you just need to push a flat screwdriver into the central hole between the 3 pins to push the flap open.


If you look at the terminals, you see the small tab which holds the connector in the block. If you want to use your new block you get the old ones out by inserting a thin strong object to push the spring tab back so you can withdraw it from the back.







Here is the power end that plugs straight in to the connector that has a green wire going in one side and no corresponding connection on the other side of the block, that is in the junction box under the fuel tank. It is a 2.8mm crimp terminal. I crimped it, then soldered it for good measure. No need to cut any of your existing connections. The fuse can be removed for MOT's if required. I searched on ebay for "2.8mm terminal latch" - the ones you need have the small locking tab poking out of the bottom to click them in place.







good luck and a big thanks to the original author John Silva.




Ghostcat

16
FZS600 Fazer / Re: Header refurb questions
« on: 23 March 2017, 09:01:36 PM »
Thanks for the tips chaps, but the collector part is looking pretty ropy and I am looking to fit stainless headers when funds allow, so I need to sort out the nuts/studs anyway. Thing about the Yamaha nuts is, they are rusty as hell so they must be made out of recycled Austin Allegroes




Ghostcat

17
FZS600 Fazer / Header refurb questions
« on: 23 March 2017, 05:40:47 PM »
Hi
still got the original headers on my 2000 Fazer, I have got some exhaust paint and I've started plus gassing the nuts. Just wondering whether I should get new gaskets, and if so what type, copper or fibre ? Also could I replace the nuts with stainless, and if so where would I get the correct spec nuts. M6 stainless.. flanged ?  Connector nuts ?


tia Ghostcat

18
Introduction / Re: First big bike
« on: 09 March 2017, 12:53:19 PM »
No vinnyb BIN ! Good luck !

19
Introduction / First big bike
« on: 07 March 2017, 10:35:49 PM »
Hi
just got my 2000 Boxeye in black. Unmolested. Low mileage. Going to get to work on trying to improve headlights (double dip mod and maybe relay/uprated wiring mod) first purchase made (Haynes manual) now looking for a rear hugger. I hope to contribute in a helpful newbie way where I can.


GhostCat



Pages: [1]