Date: 16-04-24  Time: 16:18 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ferg

Pages: 1 [2]
26
For Sale & Wanted / Re: Wanted - Wingrack or Monorack
« on: 22 December 2015, 05:34:39 pm »
emailed them. First thing to go so still looking.

27
For Sale & Wanted / Wanted - Wingrack or Monorack
« on: 21 December 2015, 07:03:18 pm »
Wanted for FZS600 year 2000

Mounting kit for Givi Wingrack 2 or complete wingrack

or

Givi Monorack and top plate

Would also consider compatible kits.

Thanks

28
FZS600 Fazer / Re: Misfire After Valve Clearances Adjusted?
« on: 16 December 2015, 06:33:10 pm »
Have you rebalanced the carbs after adjusting?

29
FZS600 Fazer / Re: Bagster Fitting Instructions
« on: 30 October 2015, 08:01:10 pm »
Thanks for posting the pics.

Heres what mine looks like. One side. I think this is the original straps and clip looking at the photos above. The rear clip looks like its got a bit missing.



The other side. I think these have been changed at some time in its history!!



This is the clip on the front.


30
FZS600 Fazer / Re: Side stand engine cut out switch in more detail?
« on: 28 October 2015, 10:55:14 pm »
Agree 1)

31
FZS600 Fazer / Re: Bagster Fitting Instructions
« on: 28 October 2015, 10:54:03 pm »
I tried the Bagster site but its next to useless. :'(

32
FZS600 Fazer / Re: Bike Cover
« on: 25 October 2015, 10:07:02 am »
Old duvet and http://www.acf-50.co.uk/motorcycle/default.htm


33
FZS600 Fazer / Re: Bagster Fitting Instructions
« on: 25 October 2015, 09:35:02 am »
The one I have has different length straps on either side with different clips on each side. Do the straps just go around the frame tubes? I can see how this would work on one side but on the other the straps are a lot longer.

Just wondering if its been "modified" at some point. Do you have photos of each side?

Thanks

34
FZS600 Fazer / Bagster Fitting Instructions
« on: 24 October 2015, 11:29:58 pm »
Got a 2nd hand Bagster tankcover today. Thought fitting would be self explanatory but....

Might be some straps missing. I'm not sure.

Anyone got fitting instructions 2000 model.

Went to the Bagster website and although there is a link for fittings I cant get the link to show anything.

Thanks in advance.

35
For Sale & Wanted / Re: Wanted Fzs600 (2000) rear brake caliper
« on: 02 October 2015, 06:07:49 am »
Thanks unfazed. Bought it. Bit more than I wanted to pay but cant complain as I got the bike for £100 !!!

36
For Sale & Wanted / Re: Wanted Fzs600 (2000) rear brake caliper
« on: 01 October 2015, 10:45:49 pm »
Taking a closer look I think the answer would be no!!

37
For Sale & Wanted / Re: Wanted Fzs600 (2000) rear brake caliper
« on: 01 October 2015, 10:44:35 pm »
Does this fit?

http://www.ebay.co.uk/itm/YAMAHA-FZ6-FZ-6-600-FAZER-5VX-2004-2006-REAR-BACK-BRAKE-CALIPER-/231700760284?hash=item35f27106dc

38
For Sale & Wanted / Wanted Fzs600 (2000) rear brake caliper
« on: 01 October 2015, 10:41:44 pm »
Wanted - Rear brake caliper for 2000 FZS600. Looking at the forum there is a TRX850 upgrade. Looked on ebay but cant see anything at the moment although I will keep looking.

39
FZS600 Fazer / Re: Just got a FaZer 600 - Which Year
« on: 24 September 2015, 09:19:32 pm »
There not in good condition. In fact its probably the worst if seen. The studs and nuts look like one part and are starting to flake off. Ill have to post some photos. Think ill leave them at the moment and keep soaking in penetrating fluid. The heat cycles may help. Think I'll have to take out the nut and studs as one eventually. :\

40
FZS600 Fazer / Re: Just got a FaZer 600 - Which Year
« on: 23 September 2015, 06:33:44 pm »
Have to say. House of Fraser photo makes sense now. Thought it was some sort of in joke.  :lol

41
FZS600 Fazer / Re: Just got a Fraser 600 - Which Year
« on: 23 September 2015, 06:24:15 pm »
Oh shit. That's embarrassing. I do know its a Fazer. Honest!!!!

Never even noticed id done that in the title. In fairness I did get it right in the message. Can I blame autocorrect?? 

42
FZS600 Fazer / Re: Just got a Fraser 600 - Which Year
« on: 22 September 2015, 09:02:14 pm »
You have PM

43
For Sale & Wanted / Re: FOR SALE- GIVI WINGRACK 2 FZS600
« on: 22 September 2015, 08:30:53 pm »
Just joined here yesterday. Picked up a Fazer 600 at the weekend in need of a bit of TLC. Not sure if all wingracks fit all Fazer 600. Mines a 2000 (I think)

What are you looking for for the wingrack? I have top and side boxes.

44
FZS600 Fazer / Just got a FaZer 600 - Which Year
« on: 22 September 2015, 08:25:03 pm »
I just bought a Fazer 600 at the weekend for £100. W reg but says on V5 year of manufacture 2000. Any Fazer experts out there can confirm year.Its an import and has been sitting outside for a year or two after it threw a chain. Ordered a few bits to get it going again. Rear sprocket (came with carrier) Clutch push rod which had been snapped by the chain coming off. This was the main reason it was left sitting as the clutch did not work. £17 for that so cheap fix. Just need to get the old one out!!!

I took off the sprocket cover with the cutch actuator and it was well corroded inside and I could not undo the screws. New one ordered. Less than £20.

It will need a clutch lever as it snapped, a rear tyre, a chain (already have one) and I'll replace the oil, the filters (air and oil) and plugs as a matter of course. Ill probably replace the brake pads and also the standard rubber brake hoses with stainless steel braided. Brake fluid and coolant.

Only thing I am struggling with so far is the headlights. Its an import so I was hoping to pick up a set of UK spec ones but so far no luck on ebay (just started looking TBH) Previous owner had stuck on some sort of deflector. Might be a cheap fix in the short term if I can not come up with anything else. Not going to spend huge sums of money on it as its a second bike. First love is my XJR1300

Biggest worry is the state of the downpipes and more worryingly the studs are VERY corroded. Might just leave well alone!!!

Anything else I should be looking out for??








45
Introduction / Re: Newbie with Project Fazer
« on: 20 September 2015, 01:02:10 pm »
Cheers REd98. I have just taken off the housing and as I suspected the push rod has been damaged. The end part fell out of the casing as I took it off. I will have to take off the clutch cover on the other side and see if I can either get it out or push it through from there. Nothing else damaged so I'm happy with that.

46
Introduction / Newbie with Project Fazer
« on: 20 September 2015, 10:09:45 am »
Hi, I'm Ferg. Just bought a Fazer that has been sitting outside for a couple of years after it threw a change. Got it through a local bike shop for next to nothing. Its an import as the speedo has a MPH sticker on it and the lights dip to the wrong side. First registered May 2002 but I suspect its a 2000 model. Maybe and expert on here can tell from the photos.

Confession time. My first love is actually my 1999 XJR1300 and this will be my second bike. Sorry if that offends any Fazer lovers!!

Needs a fair bit of work but ill get it running first, MOTd and taxed and then see what I want to do with it.

The chain and rear sprocket are missing along with one chain adjuster. Might be spacers from rear wheel also but need to look into that a bit more first.

Previous owner said that the clutch wont engage since the chain came off. Hopefully its just a bent push rod or something simple.

I will probably be bugging you all for more info once I start work on it. Power washed it this morning!! Photos are pre-powerwash.








Pages: 1 [2]