Date: 16-04-24  Time: 22:53 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - OliZ

Pages: [1]
1
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 23 February 2020, 09:49:53 pm »
TPMS sensors installed
TPMS Sensor
TPMS Sensor


TPMS control box installed
20200223 132742
20200223 132742



TFT unit  installed, screen off
20200223 125346
20200223 125346


TFT unit installed, screen on in daylight
20200223 130011
20200223 130011


Night screen, in daylight
20200223 125538
20200223 125538




20200223 125929
20200223 125929

2
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 21 February 2020, 11:08:28 pm »
I only have unboxing videos so far but will be adding more content.


Dash: https://youtu.be/oAkGdX_01nA


TPMS: https://youtu.be/adbktcvyZgg

3
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 16 October 2019, 05:38:52 pm »
Perfect! That is exactly what I am looking for. Talk about over and beyond!

The proposed hardware solution is perfect, the intended use case is spot on, the intended user experience is sublime, and there may even be a graphical presentation.
The way this problem is approached and kicked over the horizon is sensational.
This innovative mindset is so refreshing.

4
Fazer 1000/FZ1 corner / Re: fazer exhaust sound
« on: 15 October 2019, 09:57:28 pm »
Quote from: Ripsnortingvtwin on 15 October 2019, 08:13:32 pm
guys

i have tried 2 diffract pipes on my fazer , i have an mtc on it at the moment  but i am looking to get a more sporty sound and one able to tell me what they have, thinking arrow , akrapovic,termignoni ????
thanks guys


If you were able to manually keep the Exup open you would probably get a deeper note.
We are discussing re using the TFT dash for that perhaps.
Check out the other thread.

5
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 15 October 2019, 09:54:38 pm »
I am excited to hear of any updates re the exup.
If that can be done I'll be ordering.

6
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 10 October 2019, 10:23:01 pm »
Quote from: DJDLTD on 10 October 2019, 09:14:00 am
That's a real good point - I must have tried about 3 different cans on my Fazer for a louder sound - have even chopped 15cm off the Akrapovic can I had to get the louder deeper note. Great idea about adjusting the power range of the EXUP though - would be great to have a setting on the TFT Dash to control when the valve would open - I think ECU does it around 5000 RPM?


I have noticed a considerable power increase around the 6-7000rpm mark and I assumed that it was due to the Exup.
Mine sounds different from around the 7000 mark.
I see or hear no evidence of the Exup opening as early as 5000.
From a wheelie or  power turn perspective the jerk makes the bike harder to balance and it would be interesting to have more control over that.

7
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 10 October 2019, 05:40:33 am »
Quote from: DJDLTD on 09 October 2019, 08:07:29 am
Quote from: OliZ on 09 October 2019, 06:53:45 am
Awesome.
Is there any chance to make it compatible for telling the Exup valve to stay open?


I believe the EXUP servo is controlled by the ECU / The TFT Dash doesn't change anything there other than read the RPM signal coming from the ECU. Certainly possible to do this in but not without some wiring modification to the bike so that the EXUP servo is controlled by the TFT Dash instead of ECU. Although if EXUP servo was open all the time wouldn't you lose low / mid range power?


That is possible, although I would do it for a nicer exhaust note and revert back for when I needed either low end power or to do the MOT.
Even with a full flow slip-on my bike is so quiet that I can MOT it with that so it's very convenient to have the Exup.
I just don't want it to be that quiet all the time and I don't want to change muffler for MOT.
Opening the Exup on demand would be ideal 😀


On your point though, perhaps the 7000rpm power spike could be moved lower in the range by opening the Exup.

8
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 09 October 2019, 06:53:45 am »
Awesome.
Is there any chance to make it compatible for telling the Exup valve to stay open?

9
Fazer 1000/FZ1 corner / Re: TFT Dash for the Fazer 1000 / FZ1
« on: 28 September 2019, 03:05:00 pm »
Very exciting project.
Gives me ideas  :)

Pages: [1]