Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => Fazer 1000/FZ1 corner => Topic started by: Mustang on 18 June 2018, 09:08:23 pm
-
just snapped one of them, £39 a set on wemoto. £117 on fowlers, Jesus.
-
I used one of those venhill exup rebuild kits. IIrc it was only a tenner, worked like a charm
-
The wemoto ones are fine, Amazingly easy to fit (does help having an extra hand though ;) ). I replaced mine and I have very little mechanical skill.
-
:agree
-
Did mine with nipples and 1.5mm Bowden cable off of ebay. Easy
-
Sadly it’s not the cable that snapped but the adjuster. When the engine is off I found the exup cam doesn’t line up over the locking hole. It’s supposed to right? But I found I couldn’t get enough slack with the adjuster so I gave it another turn and it sheared off. Is it supposed to line up when you turn the engine on?
-
It will only line up when you switch the ignition on or turn off the engine with the kill switch. Adjustment is made on the cables under the tank on the right hand side
-
Airbox replaced, carbs cleaned and refitted, newer carb rubbers, carbs balanced, new exup cables.
(https://preview.ibb.co/kFZOcy/3610_B8_AE_F532_46_D9_B701_7_B9227_E33857.jpg) (https://ibb.co/nwtujd)
(https://preview.ibb.co/bSnWVJ/95_DA0081_D319_4_EAC_B106_7_F3_CF52_DA3_BF.jpg) (https://ibb.co/dbEBVJ)
(https://preview.ibb.co/exdGxy/B4_DDBFE7_E7_A6_4_C29_811_A_00_FB771_B7559.jpg) (https://ibb.co/jD0kqJ)
(https://preview.ibb.co/cnAkqJ/E2_E53_D3_E_C000_4_F45_8118_35_C739_AB52_EC.jpg) (https://ibb.co/c3bfPd)
(https://preview.ibb.co/dxOicy/D37_EA009_1_A7_A_46_E9_B298_51_ABA78625_A2.jpg) (https://ibb.co/hSRQqJ)[size=78%](https://preview.ibb.co/dN4BVJ/08_EB37_A5_938_D_4333_8060_5004_D7_D35_EE1.jpg) (https://ibb.co/jm9dAJ)[/size](https://image.ibb.co/f8Y5qJ/D37_EA009_1_A7_A_46_E9_B298_51_ABA78625_A2.jpg)