Date: 01-05-24  Time: 22:52 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - chrischristopherson1313

Pages: 1 [2]
26
Introduction / Re: Mod 1 passed!
« on: 30 April 2016, 08:20:53 am »
Passed!  Loving the fzs600 been lucky with the weather here in East anglia to

Sent from my GT-I9300 using Tapatalk

East England, where exactly.
Well done on passing. Now you can ride normally:)
No more unimportant checking on lights stop:)

27
Introduction / Re: new Fazer
« on: 30 April 2016, 08:18:56 am »
Sounds good I want to get a taller screen when I can afford it Maby a double bubble,  what did you wire your power socket into?

Sent from my GT-I9300 using Tapatalk

I got wind deflector for £40
Expensive hope it will make a difference
I put a socket powering into plastic cover , drill the whole looks like originally

28
Events, Meets, Ride outs etc / Bristol this Sunday?
« on: 30 April 2016, 12:13:18 am »
Any fazer in Bristol? Want to go for ride on that Sunday.
I have just bought 98 fazer and alsace a lot questions? ?

29
FZS600 Fazer / Re: front sprocket nut
« on: 30 April 2016, 12:03:10 am »
tmp 5921 20160429 1829291866326807
tmp 5921 20160429 1829291866326807
tmp 5921 20160429 182907249810580
tmp 5921 20160429 182907249810580
FFS Sinto I think you were lucky that the chain had not jumped the sprocket and wiped out the clutch push rod assembly.  :eek :fish


I know!

I kept putting it off due to one thing or another, knew it needed done but came end of last season I put it away and one thing led to another, wirk/family issues etc but yes, I'm extremely lucky so it's a lottery ticket at weekend me thinks :)


Ok so all done new sprocket and nut on place:)
The picture of old sprockets and that small nut attached

tmp 5921 20160429 1829002038478561
tmp 5921 20160429 1829002038478561
" alt="" class="bbc_img" />


30
FZS600 Fazer / Re: front sprocket nut
« on: 29 April 2016, 11:59:54 pm »
tmp 5921 20160429 182907249810580
tmp 5921 20160429 182907249810580
FFS Sinto I think you were lucky that the chain had not jumped the sprocket and wiped out the clutch push rod assembly.  :eek :fish


I know!

I kept putting it off due to one thing or another, knew it needed done but came end of last season I put it away and one thing led to another, wirk/family issues etc but yes, I'm extremely lucky so it's a lottery ticket at weekend me thinks :)


Ok so all done new sprocket and nut on place:)
The picture of old sprockets and that small nut attached

tmp 5921 20160429 1829002038478561
tmp 5921 20160429 1829002038478561
" alt="" class="bbc_img" />

31
FZS600 Fazer / me again rumbling/metalic sound
« on: 29 April 2016, 11:57:07 pm »
There is a frequent sound from bottom or  front of the bike.
The frequency is higher when speed is higher. Progress with the speed.
It doesn't mater what gear it is or neutral.
I thought the is a problem with breaks or bearings but when I wheel the wheel I can't hear anything?
Can this sound be from somewhere else then wheel.

32
FZS600 Fazer / Re: front sprocket nut
« on: 29 April 2016, 11:43:57 pm »
FFS Sinto I think you were lucky that the chain had not jumped the sprocket and wiped out the clutch push rod assembly.  :eek :fish


I know!

I kept putting it off due to one thing or another, knew it needed done but came end of last season I put it away and one thing led to another, wirk/family issues etc but yes, I'm extremely lucky so it's a lottery ticket at weekend me thinks :)


Ok so all done new sprocket and nut on place:)
The picture of old sprockets and that small nut attached

tmp 5921 20160429 1829002038478561
tmp 5921 20160429 1829002038478561
" alt="" class="bbc_img" />

33
FZS600 Fazer / Re: screeching fairing! !!
« on: 28 April 2016, 10:29:39 am »
Front indicators vibrating on the fairing?.Smile


There are mirrors and indicators actually:)
Will try velcro and see if this help.

34
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 10:19:48 pm »
You might be interseted to know, especially fazersharp, I've eventually done my chain and sprockets on my '98 it had covered 28,400 miles and probably original chain and front sprocket not sure of back on as it looked have abused as the front one did.

Will do some picture tomorrow morning but I don't think it's so bad as on the picture

35
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 10:18:18 pm »
28k but the nut it's still there just loose a bit.
It's original nut and sprocket looks as it was changed

Ok thank you for the info

Just as I thought 28k and already been replaced

DARRSI. are you reading this?  :pokefun (I believe it goes  ) :nana

The sprocket may have been replaced, but still the original nut!
Hardly surprising it's done over 24K on an 18 year old bike!
You still don't get it do you - its not the nut its the output shaft on 99 onwards.
We are yet to find a 98 with an un touched nut that has had the nut come off on its own

Have you tried a museum?
To have a bike 18 years and not use it is just weird.
Yes that is now becoming an issue - to find 98s still running factory chain and sprockets, but every one we do find backs up my theory.
Just like this one has
I shall remind you that twas YOU that  :pokefun me

Chain it's definetelly new.
I have bought new pair of sprocket and 12mm nut.
All coming on Friday so finger crossed I can took of that loose nut and put all as it should be.

36
FZS600 Fazer / Re: screeching fairing! !!
« on: 27 April 2016, 10:10:42 pm »
air whistling between the headlight lenses and fairing? or getting between the screen and fairing perhaps

IT'S rather some wibration from engine? as it only on some rev around 2000

37
FZS600 Fazer / screeching fairing! !!
« on: 27 April 2016, 07:30:09 pm »
Does anyone else have fazer with screeching fairing?
I can't stand it!

38
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 06:48:14 pm »
28k but the nut it's still there just loose a bit.
It's original nut and sprocket looks as it was changed

Ok thank you for the info

Just as I thought 28k and already been replaced

DARRSI. are you reading this?  :pokefun (I believe it goes  ) :nana

The sprocket may have been replaced, but still the original nut!
Hardly surprising it's done over 24K on an 18 year old bike!


IT'S definetelly old small nut (really rusty) but I can't be sure if it's original


28k but the nut it's still there just loose a bit.
It's original nut and sprocket looks as it was changed

Ok thank you for the info

Just as I thought 28k and already been replaced

DARRSI. are you reading this?  :pokefun (I believe it goes  ) :nana

The sprocket may have been replaced, but still the original nut!
Hardly surprising it's done over 24K on an 18 year old bike!

39
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 01:53:14 pm »
Will wait for new nut and then see
I am optimistic

40
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 01:49:39 pm »
28k but the nut it's still there just loose a bit.
It's original nut and sprocket looks as it was changed

41
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 12:31:50 pm »
 would be almost my age:)
Yep it's 98 typed it wrongly

42
FZS600 Fazer / Re: front sprocket nut
« on: 27 April 2016, 08:09:35 am »
1988

43
FZS600 Fazer / Re: front sprocket nut
« on: 26 April 2016, 10:51:29 pm »
Was trying unscrew with fingers only. Although it's loose doesn't come of so proboly thread it's damaged a little. Will wait for new nut first and then will try to unscrew it.

44
FZS600 Fazer / Re: front sprocket nut
« on: 26 April 2016, 09:27:39 pm »
Ok luckily the nuts didnt come of yet
I have ordered bigger nut from yamaha.
Do you think it's safe to run a bije for those couple of days until new nut come?

45
FZS600 Fazer / front sprocket nut
« on: 26 April 2016, 08:33:00 pm »
Nut on the front sprocket it's loose. I can screw it with my fingers (not even using power)
Is it normal or it should be tight.
The screw it's still on the shaft hold by washer

46
Introduction / Re: new Fazer
« on: 26 April 2016, 11:13:54 am »
To Matt

Will try to make it more touring than sport

Will Change handlebar from my ybr125 (more higher), add wind deflector, top box,
Already added heated grips, power socket.

All fine with engine so will not touch it atm.

47
Introduction / Re: Mod 1 passed!
« on: 25 April 2016, 03:58:54 pm »
Don't stress yourself!
It's more common sense nowdays :)
Drive like always and make sure you do life savers

48
Introduction / Re: new Fazer
« on: 23 April 2016, 08:02:21 pm »
Thanks
3 different trains, 4 hours journey to get it.
I couldn't belive in Bristol there wasn't any black fazer for sale

49
Introduction / new Fazer
« on: 23 April 2016, 07:46:39 pm »
0(3)

My new bike
Love it

50
Introduction / Fazer needed
« on: 14 April 2016, 04:48:46 pm »
1998/99 FAZER please


Pages: 1 [2]