Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - killerwhaleTRX

Pages: [1]

For Sale & Wanted / Booster plug - SOLD

« on: 21 August 2020, 09:55:04 pm »

If anyone else looking for a booster plug i got one with my bike purchase.
Light enough to be not to steep freight to UK....

Cheers

Mattias

Fazer 1000/FZ1 corner / Secondary flies - I did a BOBO!! Anyone here?

« on: 06 August 2020, 02:51:10 pm »

So, i was to install copperdawgs flies. Had a torch and everything but absolutely no go!! The screws actually looked oval!

Anyways, i adjusted on the spring loaded screw a bit and became to curious. Thought i had the spring with one finger but no...it shooted down in the injector thingie...cant get it up.
Any good ideas? Got a motorlight now of cource.....supid arse me....

HELP!

Fazer 1000/FZ1 corner / 03 R1 fork triples vs. Gen2 triples

« on: 29 July 2020, 09:31:00 am »

Hi guys and gals!
I have the fork swap document here so i have looked into offsets and rake and all. BUT.....
Has anyone looked into differences in the triple trees?? I´m keen on just use the legs but what does that mean in the lower departement?
I know my TRX used spacers for wheel mount...

Cheers
Mattias

Fazer 1000/FZ1 corner / New topic - Vibrations

« on: 24 April 2020, 06:02:26 pm »

I really thought going from a tdm900 (tractor) motor vibrations would be at a minimum but hands and bum is buzzing after a while.
Its absolute worse in the front but i cant really feel any vibrations in the tank.

Have you ever had front end shatter on these forks? Need to see if i can dial it better but any tips!
Otherwise ill have to chuck the heated grips and fill the fatbar with lead and heavy bar ends as i did on the trix....

Happy weekend folks & others

Fazer 1000/FZ1 corner / FZ1 gen2 - Your running temp??

« on: 21 April 2020, 07:25:08 pm »

So, today we had 18-19 degrees out and i did a 30 min inspired run after work. When stopping at home temp was 103 and both fans went on when cycling the ign.
Where are your temps...?? I´m contemplating that the Lars MAP is to lean with a full system hence the high temp....!?

Regards
Mattias

Fazer 1000/FZ1 corner / Fuel map PCV - What do you use?

« on: 06 April 2020, 08:36:59 am »

Hi guys!
So, my bike are as follows now.
AIS delete, full system, opened airbox but not the Lars way. When cold it revs nice on idle but warm idle goes south and it hunts so i reckon the map is way rich on idle.
Feels great otherwise, although fuel economy is....well high-ish

You who run from the US map pack, what have you found works the best?
I can add that i can import a PC3 map but when trying to save it as a PCV file program crasches so that not an option. I run stage4 PCV map....not the smoothed one.
And this is already at minus on idle.

Last qs, can one eff up the idle this way on the idle screw? i turned mine but nothing happened. Was thinking that i was on autochoke therefor no difference but when warm its effed....

Any input appreciated!

Regards
Mattias

Fazer 1000/FZ1 corner / Big Bore / High comp pistons R1??

« on: 05 March 2020, 03:33:39 pm »

Hey you knowitalls

As i understand the gen2 is just about the same enjun as R1 2006? With different timing and cams.
That would mean same pistons and conn rods??
Just looking what is offered if it is so...
Have you been looking on increasing comp or going big bore?

Lemme know!

Regards
Mattias

Fazer 1000/FZ1 corner / Not a Lars modded one...

« on: 03 March 2020, 04:02:14 pm »

So, i dont get the fizzer until friday but have modded another airbox..... My thoughts about it was to not cut the velocity stack in the front. Put kedo filters in the front and two velocity stacks above the velocity stacks :-) (picture says it all)
The billet stacks are from italy...and they long for mid punch.

Other i got them to put a full black widow system on it. Been fiddling with a PCV and autotune here at home but had to get a CAN cable and terminator because some ebay sellers are effed! Got a healtech ES elim. AIS plates, 16T & DV8R have sent me some smaller secondary flies..... And i get the bike on friday *lol*

Saludos!

Introduction / Yup, new member here as well.....Sweden

« on: 10 February 2020, 05:56:46 pm »

Hey! TRX user between -05 & -19
One of the most modified TRX in the world i guess, split it for parts and bought an almost bog standard 2008 fizzer. (Framesliders all over and heated grips)
Will pick it up back from Switzerland beginning march. 40k service done at pickup and they mount my new black widow full system.
Found a PCV with 02 optimizer on evilbay for 180€ and some other bits and bobs so the mods already begun

But they are to be moderate in comparison!!!

Hope to have just as nice a time in here as over at the TRX850.com forum.

Cherriooo from Sweden!

//Mattias

Pages: [1]