Date: 19-04-24  Time: 02:12 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - stu1318

Pages: 1 [2] 3
26
For Sale & Wanted / Re: Wanted: FZS1000 2003 Radiator
« on: 31 October 2014, 09:36:56 am »
Quote from: chris1969 on 30 October 2014, 09:19:40 pm
Its leaking, and tabs have corroded off, and it has a big dent in it. Its not great.
mine was the same got it repaired from a company in Glasgow...£45 or he could make a new one for £150

http://eastendradiatorsglasgow.co.uk/

27
Fazer 1000/FZ1 corner / Re: my new can
« on: 22 October 2014, 11:46:25 pm »
Quote from: ricknz on 22 October 2014, 10:04:37 am
I do like the belly pan... I have full yamaha fairings but it hides that gorgous r1 lump too much... where did you get the pan from?
cheers mike  :)

a got the belly pan from ebay someone gave me a link a thing from a company in spain

28
Fazer 1000/FZ1 corner / Re: my new can
« on: 22 October 2014, 11:44:24 pm »
Quote from: bigbluebear on 20 October 2014, 09:25:15 am
Looks great.....Have you noticed a difference in performance over the standard can.
haven't been out on it with the new can yet  :rolleyes will let ye know as soon as I do  :)

29
Fazer 1000/FZ1 corner / Re: my new can
« on: 17 October 2014, 05:31:48 pm »
Quote from: Rexr on 17 October 2014, 02:35:47 pm
I have the same can on mine all the way from Naples mine took 3 weeks to arrive, but I must say well worth the wait quality bit of kit, I drilled the revit out of mine and it sounds lovely....... 8)

 :D

30
Fazer 1000/FZ1 corner / Re: my new can
« on: 17 October 2014, 09:48:08 am »
it took 2 weeks to arrive :) very happy wae that

31
Fazer 1000/FZ1 corner / my new can
« on: 16 October 2014, 05:33:08 pm »
 :D so glad I went for this one.......my new renthals and levers and my new heated grips  :)






32
Fazer 1000/FZ1 corner / Re: spark plugs
« on: 04 October 2014, 11:19:01 pm »
 ;)
Quote from: eddie on 01 October 2014, 03:54:04 pm
dont go for the 3  pin 13 amp kind  :lol

33
Fazer 1000/FZ1 corner / Re: levers
« on: 02 October 2014, 09:13:25 pm »
Thanks mate :)

34
Fazer 1000/FZ1 corner / levers
« on: 02 October 2014, 05:48:31 pm »
I cant see the thread for the levers that where on ebay.....any help cheers

35
Fazer 1000/FZ1 corner / Re: gen 1 Misfire
« on: 02 October 2014, 05:42:31 pm »
well that's mine ok again.....new plugs fitted  :)

36
Fazer 1000/FZ1 corner / Re: spark plugs
« on: 29 September 2014, 10:27:13 pm »
Excellent thanks

37
Fazer 1000/FZ1 corner / spark plugs
« on: 29 September 2014, 08:30:14 pm »
What plugs are fitted to the fazer.....thanks

38
Fazer 1000/FZ1 corner / Re: gen 1 Misfire
« on: 29 September 2014, 08:28:58 pm »
A really don't think that's the problem with mine I'm going to get plugs first an try that

39
Fazer 1000/FZ1 corner / Re: gen 1 Misfire
« on: 29 September 2014, 05:46:16 pm »
my bike did the same yesterday.....out a run and I thought right ok time to open it up a bit.....the first ive had it over the ton mark then a felt it slow then catch again
then when a slowed down to bout 30 40 then open the throttle again it would shudder kinda like going onto 3 cylnders
was down at it earlier and started it up seems fine but theres deffo a flat spot low down any ideas.....sorry to hijack the thread

40
Fazer 1000/FZ1 corner / Re: McIvanising (Scotland Ivanising)
« on: 20 September 2014, 08:35:27 pm »
wow what a difference,,,,,noticed right away and when sitting at 30 in top gear open it up an it pulls like a train  :D now to get a nice wee can oh and cheers for the day and the cuppa ;) good to see a few of the guys

41
Fazer 1000/FZ1 corner / Re: McIvanising (Scotland Ivanising)
« on: 09 September 2014, 06:25:28 pm »
was down checking out the address earlier today  :) so a don't get lost when im down on the bike :lol very easy to find

42
Fazer 1000/FZ1 corner / Re: what exhaust do i get
« on: 05 August 2014, 09:54:00 am »
thanks for the pics will keep my eye on that akrapovic its not too far away from me either :)

43
Fazer 1000/FZ1 corner / Re: what exhaust do i get
« on: 05 August 2014, 09:48:43 am »
Quote from: Falcon 269 on 03 August 2014, 04:59:04 am
Tmation said it all, Stu.  In general, you'll find shorter cans tend to give a bit more at peak rpm but at the expense of a little off the low end.  It's a back pressure thing. :)

As an aside, please check your PMs and get back to me via e-mail to arrange details of your 'Ivanising' appointment in September.  Thanks.

Mike
I sent you a message cheers

44
Fazer 1000/FZ1 corner / what exhaust do i get
« on: 02 August 2014, 07:31:17 pm »
im getting ivanised soon and currently have a stock can on...any reccomendations cheers

45
Fazer 1000/FZ1 corner / Re: McIvanising (Scotland Ivanising)
« on: 12 July 2014, 11:44:04 am »
ye put me down for any date im in Greenock...cheers
full monty

46
Fazer 1000/FZ1 corner / silver paint code
« on: 29 April 2014, 09:32:32 am »
hi there does anyone know the paint code for my silver 03 fazer 1000.....
just got my belly pan delivered and was looking to get it painted
thanks

47
Fazer 1000/FZ1 corner / Re: Scotland Ivanising
« on: 22 April 2014, 12:47:35 pm »
Quote from: Falcon 269 on 22 April 2014, 10:46:00 am
Any aftermarket can will work but preferably not a shorty type.  Shorter cans tend to produce less torque low-mid range, although they can give a small gain at peak rpm over a normal length can.

If you leave the removable baffle in place, expect to be a few bhp down on the unrestricted can.
ok mate cheers for that :)

48
Fazer 1000/FZ1 corner / Re: McIvanising (Scotland Ivanising)
« on: 22 April 2014, 12:45:18 pm »
Quote from: mickvp on 22 April 2014, 11:03:42 am
Added your name onto the list Stu :)

cheers mick  :)

49
Fazer 1000/FZ1 corner / Re: Scotland Ivanising
« on: 22 April 2014, 10:19:23 am »
right see if I go the full monty what exhaust would I need to get?? as I don't want a loud one any reccomendations  :) oh so
put me down for the full monty

50
Fazer 1000/FZ1 corner / Re: Got Ivanised today!!
« on: 20 April 2014, 11:14:26 am »
im near Glasgow and would be up for it

Pages: 1 [2] 3