Date: 29-03-24  Time: 14:18 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - windscreenman

Pages: [1]
1
Fazer 1000/FZ1 corner / Re: Gen 2 front forks adjustment/alteration
« on: 25 March 2016, 08:17:24 pm »
Note to self
Put your glasses on before posting anything !!!!!!! :rollin
Pm Luke @ devils yam
He will have answers for you you need to only ask

2
Fazer 1000/FZ1 corner / Re: Gen 2 front forks adjustment/alteration
« on: 25 March 2016, 08:10:26 pm »
Didn't read post proper doh
Thought it was for gen one not two
Ooooops

3
Fazer 1000/FZ1 corner / Re: Gen 2 front forks adjustment/alteration
« on: 25 March 2016, 08:05:39 pm »
10mm turns in sharper if you ain't done r6 Shock yet it's a must for gen one speak to Luke at devils yam he will sort it for you he's a top  bloke

4
Fazer 1000/FZ1 corner / Re: Throttle Jerky At Low Revs ?
« on: 20 March 2016, 07:05:46 pm »
May also be pilots blocked or 1 of how do you store it over winter fuel wise do you use a conditioner  usually helps to stop blocking pilots

5
Fazer 1000/FZ1 corner / Re: R6 shock Mod fazer 1000
« on: 15 March 2016, 10:14:29 pm »
Finally got around to fitting mine at the weekend thanks to Luke's bone kit been sat in the garage for weeks well what to say absolutely f in fantastic absolute must for gen 1
Transforms the bike into a proper handling machine 
Can't speak highly enough of Luke worked a treat with the settings he sent with it
STOP THINKING ABOUT IT !!!!!!!! :lol
You will not regret doing this upgrade


Luke you are the man
Thanks again  :D

6
General / Re: Word Association
« on: 06 March 2016, 01:17:37 pm »
Sinclair

7
General / Re: brake cleaner???
« on: 06 March 2016, 12:56:18 pm »
Toolstation stock it
Screwfix also
It's cheap enough and you will have one near you

8
General / Re: Could this finally be a solution to rain
« on: 06 March 2016, 12:49:10 pm »
Used on all my visors for over 20 years never knacked any of them,  I know what it's for the clues in the name  ;)
Always use a clean cloth to apply
I only ever have clear visors wouldn't recommend  for tinted ones

9
General / Re: Could this finally be a solution to rain
« on: 06 March 2016, 08:53:03 am »
RAINEX and wind works every time

10
I would look at it being a dead cell in the battery shows volts but no guts I changed my cbf battery for a motobat gel  battery higher amps 
Put same on my steamer too and now the fazer 1000
Best £59 fix  ;)
Get a battery state meter off flee bay to monitor battery and charging circut my 06 was only funny till I changed the battery that was a yuasa too
Sold to a mate who's toured Europe on it twice and been no bother

11
Fazer 1000/FZ1 corner / Re: R6 rear shock what is required?
« on: 01 March 2016, 11:01:56 pm »
Luke is your man he will tell you all you need to know for this conversion he is the man !!

12
Fazer 1000/FZ1 corner / Re: How does my engine sound?
« on: 25 February 2016, 11:41:10 pm »
What oil you using I use fully synth gearbox quiet and silky smooth
 :rolleyes  Semi I find noisey engine doesn't mind either gearbox better on full synth

13
Fazer 1000/FZ1 corner / Re: How does my engine sound?
« on: 24 February 2016, 10:36:18 pm »
Agreed what he said !!!

14
Fazer 1000/FZ1 corner / Re: How does my engine sound?
« on: 23 February 2016, 08:43:23 pm »
Did you pull clutch lever while it's running could be a bit of clutch chatter
Just a thought 

15
Fazer 1000/FZ1 corner / Re: Ignition on crackling noise?
« on: 23 February 2016, 08:39:23 pm »
I was exactly the same only noticed the noise after ais removal being paranoid I heard the crackling and thought what the feck is that it didn't do that before  anyway not to worry if you want to check the operation of the servo lift the tank them torn the servo pulley by hand to open the valve then swith ignition on the servo should return to original point if it does servo and valve work my bike goes like a rocket now I've done the ivans too all set for sunny days now
Ride safe

16
Fazer 1000/FZ1 corner / Re: Ignition on crackling noise?
« on: 19 February 2016, 06:37:44 pm »
It's the grease inside it open it up if you don't believe me
It's very sticky grease that crackles as the cogs unmesh even if you spray coppers lip in there it still makes a noise that's what I did and it made no difference at all nothing to be concerned about its NORMAL :rollin
This is plastic parts unmeshing  and not an electrical problem you are all reading too much into it take the 4 screws out and open it have a look then chill out !!! :grumble
I didn't hear it at all until I removed the ais off mine I guess everyone is just more sensative to it cos now you can hear it it must be fooked well it's not  :stop
My exup works very well and yes it crackles from the servo  it ain't broke and it dont need fixing you will waste your money trying to silence it   :groan

17
Fazer 1000/FZ1 corner / Re: Strange click from rear end when pulling away
« on: 17 February 2016, 08:05:09 am »
Check your chain rub stip is intact  could be banging off swing arm as you pull away / is your shock mountings all tight / systematically check all bolts has it had chain and sprockets lately the front sprocket could be loose they do suffer that if new locking washer isn't used every change
Hope this helps

18
Fazer 1000/FZ1 corner / Re: Ignition on crackling noise?
« on: 17 February 2016, 07:42:48 am »
You could remove the servo or unplug it if not required mines done 31kand when I opened the servo the grease was like black thick sticky as the cogs unmesh that's where my crackling noise was coming from I still got exup so I need mine but it's nothing to worry about honest :'(
Lift tank and feel servo you can feel it working if your hearing isn't clever put a screwdriver on servo and put the handle to your ear that will amplify your crackling  :lol

19
Fazer 1000/FZ1 corner / Re: Ignition on crackling noise?
« on: 16 February 2016, 11:59:06 pm »
Mines got a new battery on and it's still doing it it's the exup servo the grease inside is very sticky and it sounds Like it's clicking as the cogs spin uplift the tank and feel the servo for vibrations to check operation  ignition off turn wheel on servo to open valve then switch ignition back on if it returns to original setting put your tank back down and don't worry about it :lol

20
Fazer 1000/FZ1 corner / Re: Ignition on crackling noise?
« on: 11 February 2016, 10:46:03 pm »

Just done full service inc ais removal makes changing plugs a piece of piss,Just had my servo out of the bike cracked it open greased it all put it back  oiled cables , serviced exup too snapped 1 bolt in the exhaust doh
Drilled out re tapped and fresh stainless bolts, put it back together switched ignition on heard a funny noise from the servo thought the worst  :'(
 took it out opened valve and swithed ignition on and servo returned to neutral position so thats a bonus buzzing was just servo spinning up  :lol
Next up ivans jet kit

21
Fazer 1000/FZ1 corner / Re: Paint Colour Codes.
« on: 03 February 2016, 09:48:58 pm »
Colours on logbook are very basic  too much like hardwork to put full description
Silver can be anything from pearl white to dark grey all within delay description
 :lol

22
Hi Luke I have my shock how much for dog bones
Thanks

Pages: [1]