Date: 28-03-24  Time: 19:14 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - tex

Pages: [1] 2 3
1
General / Pigeons
« on: 01 May 2020, 11:17:10 am »
Great this

2
Fazer 1000/FZ1 corner / Tft dash
« on: 07 November 2019, 01:13:29 pm »
I also brought a tft dash , and can confirm it's a brilliant piece of kit, took 15 minutes to install plug and play. It's very clear  with plenty of options . I was having trouble reading the old clocks with the multi gauge so it's a great upgrade. Well built and simple to use , you don't need a degree in i.t to use it😊. Highly recommended.

3
General / Sprayer
« on: 11 September 2019, 10:56:12 am »
Just thought I would recommend  the finishing touch paint shop who did a great job on my tank.

4
General / Ulez
« on: 31 August 2019, 08:20:31 pm »
Just looking on ebay, there's a gen 1 for sale, seller says its  registered as ulez compliant with tfl, so looks like it can be done.  Item number 223625794181

5
General / Paint shop
« on: 15 July 2019, 12:26:51 pm »
Hi, I'm going to get my fuel tank sprayed mildly custom does anyone know of a good spray shop , thanks

6
Fazer 1000/FZ1 corner / Running rough
« on: 18 February 2019, 01:35:51 pm »



   Not sure what this one is any help suggestions appreciated, bike was running great then filled it up with super unleaded  on the way home started running rough spluttered home like pulling away in third. Got home had some tea then went back out and it was fine again used it for 3 days no problems,  went out yesterday and it was bad again, so drained the fuel and put fresh in but no difference, starts up fine revs high but back fires, only thing I did notice when I turn the ignition on it doesn't make that clicking noise so maybe the fuel pump is on the way out , does this sound like the fuel pump ? I don't think it's blocked jets as I use sea foam and it hasn't been laid up for more than a few weeks.

7
For Sale & Wanted / Sold
« on: 12 September 2018, 01:18:56 pm »
Pair of oem mirrors with bolts and blind spot inserts, good condition £35 posted pm me your mobile and I'll send you some some pics


    Now SOLD

8
For Sale & Wanted / Sold
« on: 12 September 2018, 01:16:02 pm »
Got some original yam crash bungs for sale the plates are red and will need re doing in your bike colour, complete with all bolts and instructions, £35 posted, pm me your mobile and I will send some pics        BUNGS  SOLD

9
For Sale & Wanted / For sale
« on: 12 September 2018, 01:11:37 pm »
Pro race motogp style exhaust , in stainless Steel, quite load and throaty  £80 posted cost me £200. Can't post any pics as usual so pm me your mobile number and I'll send some picks

10
General / Bike insurance
« on: 03 July 2018, 08:32:19 pm »
Im ' trying to get insurance for my son , he is 16 and on a apprillia rs 50 , so far cheapest is 450 on compare sites,  does anyone know if there are any specialist sites for 16 ers

11
For Sale & Wanted / gen 1 seat
« on: 17 October 2017, 12:20:57 pm »
I'm selling my seat, it's custom made and padded,  don't no who did it but it's very comfortable  for rider and pillion.  Looking for £70 posted.

12
General / hhh
« on: 15 July 2017, 06:14:08 pm »
 Just been greasing the steering head bearings , they are taper roller , when I torque the top yoke nut it is tightening the bearing, is there a set way to do this like pinch bolt first, thanks

13
General / forks
« on: 15 July 2017, 06:10:16 pm »



 Quick question,  just been greasing  the steering  head bearings,  I have taper ones , when I tighten the top stem nut it seems to tighten the bearings as  the steering goes tight , is there a sequence  ie tighten stem first or pinch bolts first. 

14
General / Ducati stolen
« on: 16 June 2017, 01:33:00 pm »
My mate has just had his 899 stolen by scooter riders, they were heading towards dalsten in London one riding the scooter pushing , anyone around there keep your eyes open 😣 reg HK 14 colour red

15
The Laboratory ! / test
« on: 15 June 2017, 08:45:10 pm »
Test

16
General / Trip to france
« on: 17 May 2017, 02:30:18 pm »



  Me and two other bikes are of to le man's on Friday got digs about 1 hour drive from the track, any tips on driving in France appreciated, also anyone else on here going?

17
General / Wiring a satnav
« on: 17 May 2017, 02:27:11 pm »
Just got a Garmin , does anyone know if you wire direct to battery there's two wires pos and neg fused, or should it be wired to ignition. I already have a USB charger but Sat nav must use the cradle. Thanks

18
For Sale & Wanted / ivans sticker
« on: 10 December 2016, 12:37:15 pm »



 Has anyone got a ivans sticker knocking about they don't want, I'm changing my screen and need one for it, thanks

19
Fazer 1000/FZ1 corner / coil
« on: 05 November 2016, 05:51:32 pm »



 Can anyone remember off hand what colour the live is on the coil,  thanks

20
General / Starting problems on 2008 avensis
« on: 12 September 2016, 11:56:38 am »
After a bit of advice , Toyota avenue 08 d4d diesel . Drives fine no warning lights coming on cranking OK but won't start happend a week ago so bumped started it and was OK until today, sometimes it takes a bit to start but no go this morning. Before I take it to the garage anyone got any ideas. Thanks

21
Fazer 1000/FZ1 corner / exhaust studs
« on: 25 March 2016, 02:51:04 pm »
 
  My job over easter is changing  the exhaust headers, while I'm there I may as well  change the studs for stainless,  any one got any tips on getting  them out without  snapping them. Thanks

22
Fazer 1000/FZ1 corner / measurements
« on: 17 March 2016, 05:52:06 pm »
Does anyone know or could a nice foccer measure the distance between the centre of the steering stem  to the centre of the ignition  barrel  on a gen 1,  thanks.

23
General / gp exhaust
« on: 11 November 2015, 05:13:36 pm »

Can anyone remember what company sells the motogp exhaust, the cone type one not the stubby, for the gen 1, thanks

24
General / helmet
« on: 29 October 2015, 02:56:51 pm »

 Got a nice parcel  today, pleased with it, nice and quiet,  it has a pin lock,  can anyone  in lighten  me on this

25
Fazer 1000/FZ1 corner / brake pistons.
« on: 16 April 2015, 06:00:03 pm »
While cleaning  the brake caliper  pistons  one poped out, managed to get it back in. Do you think it will be Ok or should I replace the seals.

Pages: [1] 2 3