Date: 29-03-24  Time: 14:19 pm

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Andy-Fazer-thou

Pages: [1]
1
For Sale & Wanted / Fazer Manual for sale
« on: 17 April 2015, 12:02:03 pm »
I Have a Fazer 1000 haynes manual for sale £10 + postage
any one interested ???
Thank you

2
Fazer 1000/FZ1 corner / R6 Can & Link For a Fazer 1000
« on: 11 December 2014, 03:24:16 pm »
Hi All
Ive just bought a carbon can with link pipe for an R6
what will i need to do to fit it to my fazer 1000 i have original pipe on the fazer and dont really want to chop it up..
If it wont fit without too much trouble is there any one who would want to swap it for 1 that will fit my fazer i will send pics if required ill try put 1 up

thanks alot

merry christmas all















3
For Sale & Wanted / Hi Wanted Please
« on: 27 September 2014, 07:26:19 pm »
Hi as any one got
either a pair or right side (as u sit on the bike)
the inserts that go inside the fairing nose cone
as cheap as poss please

thanks

4
For Sale & Wanted / My Fazer 1000 up for sale £1500
« on: 14 August 2014, 07:48:06 pm »
HI Everyone

Right My Fazer is in very good condition and clean Lots of recent work clutch & springs, battery, new rear tyre, chain & sprockets, Brakes, fork seals, service including carb balance, powder coated wheels, belly pan, , tinted screen,  MOT september 2015 no tax as of new law
 the bike has 64k on it And still bombing along as strong as it was the day it was made  the engine thats in it is excellent it dont smoke knock or rattle or bang.
heres a Link to my Fazer on you tube
 
Fazer in the garden 2


Andy

NO OFFERS i want £1500 for it and thats VERY cheap considering ive seen 2 others on auto trader with similar mileage for 2700+

 

5
For Sale & Wanted / Putting My Fazer 1000 up for sale
« on: 13 July 2014, 03:12:49 pm »
Here i have my very nice 2002  Fazer 1000 in the best colour (IMO)
 Lots of recent work clutch & springs, battery, chain & sprockets, Brakes, fork seals, service including carb balance, powder coated wheels, belly pan, heated grips, tinted screen, Brand new maxxis supermaxx rear tyre fitted 03/07/14 Good front tyre, runs very well i really like this bike but ive now had it a year so want a change.
 the bike has 62k on it but with engine technology nowadays this is not high mileage
Bike located in Lincoln, Lincolnshire
 
 my bike runs and rides excellent no smoke knocks or bangs
 I ride this bike everyday to work & back with no trouble whatsoever (40 miles)
 taxed till october 2014 tested september 2014
 Link to my Fazer on you tube
Lookin For Reasonable offers aroud £1900
the rear tyre in the video is no longer on the bike ive had a new 1 fitted since video was shot
 
Fazer in the garden 2

7
Hi
I have a full set of brake discs for a fazer 1000 2 x front & 1 x rear in good usable condition
and also a set of standard fork legs which have had new Seals, Slide & guide bearings and dust covers
Not mint but are still in very good usable condition with no major marks pits or holes
Id prefer collection as both items will cost a fair bit to post but can post if buyer pays postage
im in lincoln
im open to offers but not letting them go for peanuts 8)

im also looking for a nice aftermarket can & link pipe for my fazer 1000 gen 1
Not Overly loud as have elderly neighbours

8
Help Desperate need of a Left (as you sit on the bike) Fork Leg willing to buy a pair
Ive had 3 oil seals put into my forks in the last 5 weeks and the left side is always dripping and leaking
its been done at a bike shop the right leg is fine no trouble but the left leg is being a pain in the arse




Thank you
please help some one i gotta get my baby 100% again

9
Fazer 1000/FZ1 corner / Rev Counter 7k is it exup ????
« on: 11 May 2014, 01:41:30 pm »
Hi Everyone
I have a bike i actually enjoying riding an 02 Fazer thou i have had her nearly a year now and she has 60k on the clock but she has been riding so well i have really gone to town on it since ive had her new chain & sprokets, both tyres, battery, centre stand, fork seals, carbs balanced, serviced, new ignition, clutch, wheels powder coated & belly pan just whats bin done so far, I really thought id got it sorted but now a new problem has raised its head when i start it up in the morn my rev counter shoots to 7k back to 0 it does it a few times then stops and is ok, ive checked on the forum and everything seems to point to the exup valve, but nothing about it doing it now and again just permantly So i checked the valve on the exhaust and it moves free and is well lubricated so i dont think its the actual valve so just wondered what else could it be, I am mechanically minded so if its not too big a job id attempt myself,
Any advice would be appreciated

thanks

Andy

10
Fazer 1000/FZ1 corner / Ignition Barrel & key for a 02 Fazer 1000
« on: 23 October 2013, 04:25:52 pm »
Hi Again all
1stly id like to say thanks for the help with the advice i got from the lads on the forum
about my front sprocket noise loosened off chain and its now not whining Thankyou
well i just cant believe my luck i just got all my bike sorted out after spending a few quid to
get her back to the condition shes in
SUM ASSHOLE tried to nick my bike whilst out last week and basically shafted the ignition barrel
it still works but could start it with a 1p piece. I know i have been Very lucky in not loosing my bike'
but also i lost my job last week. So please if anyone has a ignition & key they would sell very cheaply or kind enough to donate
i would be so grateful.

thankyou very much

Andy


11
Fazer 1000/FZ1 corner / Whining from front sprocket area
« on: 26 September 2013, 05:26:08 pm »
Hi All
I have recently got my Fazer 1000 all up and running again after a bit of a breakdown
just had to spend a fair bit of cash but up to now worth it.
BUT i have a whining from around the front sprocket (please dont let it be serious) i just lost my job
could anyone give me some advice on what it could be.
just had new clutch and springs and new chain and sprockets fitted but was whining before i had that done but seems little quieter since work was done
as front sprocket nut was loose common fault on fazers i been told the bike has done 58k but always been very well looked after.

thanks



12
For Sale & Wanted / Wanted Belly pan for Gen 1 fazer thou
« on: 27 August 2013, 04:25:58 pm »
Hi Looking for a belly pan for my 02 fazer thousand
pref blue
if you have 1 for sale any chance you can put up a pic and price please

Andy

13
Fazer 1000/FZ1 corner / Fazer 1000 Center stand bolts
« on: 26 August 2013, 05:18:00 pm »
Hi All
just purchased a center stand for my beloved 02 fazer 1000
boooo hoooooo not got any bolts to fix it with. got some normal nuts & bolts
but the original 1s go wide at top with no threads on
has anyone got one to flog or can i have please.....

14
Introduction / Newbie fazer owner
« on: 21 August 2013, 08:02:58 pm »
Hi All
Im Andy im 49 years old and just got back into biking i passed my test November last year
to break myself in i bought a 600 bandit very nice i really liked it but got used to it so went for summat different and looking back now wish id kept the bandit had a ZX9R streetfighter & a ZX7R sports bike i wasnt happy with either of them.
A friend of mine suggested a Fazer 1000 so i went to look at 1 or 2 and found a nice one at the right price with a little work to do
So what do i think I LOVE IT great power good looking and shit hot handling. I really feel comfy and safe on this machine.
so time to get it back to the stud it should be
new rear tyre, new Renthal chain & sprockets, new heavy duty clutch & springs, Brake pads all round, carbs cleaned & balanced, Full Service and new MOT pending.
So Thats me Hope theres more owners of fazers near me for a ride out sometime soon


Pages: [1]