Fazer Owners Club - Unofficial
Bikes, Hints'n'Tips => For Sale & Wanted => Topic started by: Gheeks on 05 June 2016, 06:26:09 pm
-
Bought myself a project a few weeks back which took a bit of a downward turn today. Looks like top end is knackered and am not sure if it's worth repairing. 😫
Hence am considering breaking it to recoup my costs. Thought I'd put a note on owners club and see what interest is out there.
Good parts available include
Rear Wheel and Tyre (Brusgestone) plenty of life.
Front wheel ( tyre No good)
New Chain and sprockets bought with bike ( unused)
Rear Calliper rebuilt professionally by powerhouse
Front Callipers in good nick
New Pads frt and rear still in box
Good original wiring with alarm bypass
Seat (no tears)
Good battery
Dash clocks all ok
Bars and switch gear all ok
Carbs all complete with new seals and gaskets
Bodywork in Silver
Bikini fairing with fox eye lights all good
Tank good no dents
Tail unit no cracks but scratched.
Indicators all ok
Rear lights all ok
Radiator Good
Foot rests and levers all cleaned up in good condition.
Air box with new filter
PM me if interested.
-
Pm sent re: rear caliper and front and rear pads.
-
Have maybe been a bit hasty. Having had a nights sleep on it I'm going to have another look tonight and see if it's salvageable. It exhaust studs that are the problem. Appreciate the messages and will let you know if I decide to break it.
-
Interested in a full set of bodywork inc headlamps and mirrors
-
Have maybe been a bit hasty. Having had a nights sleep on it I'm going to have another look tonight and see if it's salvageable. It exhaust studs that are the problem. Appreciate the messages and will let you know if I decide to break it.
I've replied to your pm Gheeks 🙂 Catch up soon ref bits.
-
Cheers for all enquiries for parts - There are still many good bits left so message me if you are interested.
RHS engine covers
Stator unit
Indicators
Side and centre stand
Radiator
Seat
Tail light
Wiring loom
Relays
ECU
Wheels
C&S kit
Rear tyre
Lock set
Need to clear bits so I can fund another project ( will look a bit more closely this time before buying though) 😏
-
Do you still have rear caliper and if yes do you know if it fit to fazer from 98??
Thanks
-
Sorry no longer have calliper.
-
Thought I'd update post to let people know what I've got left. Open to offers as I need to get rid so I can get space for another bike 😜
Front Callipers
Front indicators
LH and RH switch gear
Clutch lever
Swing arm
Rear light
ECU
Loom
Ignition coils
Lock set
LH Engine Covers
Exhaust end can (original)
Handle bars
Engine bottom end
Frame with V5.
Front wheel ( minus discs and tyre )
Rear Wheel ( with good disc and tyre BT22 )
Foot pegs all 4
Centre stand and side stand
Carbs ( fitted with new seals and gaskets but will still need ultra sonic cleaning I think as bike had been standing for a long time )
OEM tool kit
Lots of nuts bolts and clips.
Cheers
-
Hello how much for coils?
-
Still got the side stand switch?
If so, how much?
-
Kentish - £25 for the coils posted.
-
£10 for side stand switch posted
-
£10 for side stand switch posted
-
Do you have all 4 of the inlet manifold connecting rubbers, if so are they in good condition and how much?
-
How much for the carbs?
-
I don't want much for the carbs but...... When I started project the bike had been idle for a while. I fitted seals and gaskets from a refute kit and thoroughly cleaned with paraffin . Float valves were also replaced. Bike ran but was rough so I suspect they could really do with ultrasonic cleaning really. Hence am not wanting slot for them. However it would be £15 to post I'm guessing. PM me an offer - if you're near Telford you could collect.
-
How much for seat? Do you still have rear brake caliper?
-
Sorry seat and calliper gone.
I've got the following left-
original exhaust end can
Centre stand
Side stand
Starter motor
Tail light
Front indicators
Coil support bracket
Rear under tray
Swing arm
Front and rear spindles
Locket set ( one key)
RH infill panel
RH and LH side panels ( small black triangular ones)
Front Callipers
Frame ( with V5 in my name )
Engine ( still in frame at present) bottom end is usable ( only 18000mls. ) but top end is knackered.
Clutch lever
Carbs
Air box ( new filter)
Handle bars and yoke.
-
Hi,
I'm very interested in buying your bottom end (oo-er!).
How much do you want for it?
Hollywood
-
Bits left now
Frame with yokes and rear swing arm with shock
Side and centre stand
Tail light
Lock set
Foot pegs ft / rear LH and RH
Handle bars
Clutch lever
Subframe undertray
Black side panels
RH in fill panel
Side stand switch
Throttle / clutch cables
RH / LH switch gear
Air box plus air filter
Rear brake torque arm plus bracket
Front and rear spindles
-
edit: sorted, thanks!